 Γεια σας, είμαι Βικη, και σήμερα έχω ένα πολύ σκουριστό καρδί για σας, θα χρησιμοποιήσω δυστραστικές οξιότητες, όπως και οι σκουριστότητες κομμάτια. Λοιπόν, θα δοκιμήσω με το CitiScape Skyline κομμάτια, αυτά είναι από σκουριστότητες, και έρχονται σε ένα πολύ χανακό πλαστικό εμβελό, ώστε να μπορείτε να τα σκοτήσετε εύκολα. Τώρα μπορείτε να τα κομμάτε και να τα σκοτήσετε ένα από το άλλο για έναν καλύτερο δημιουργείο στον καρδί σας. Αλλά πρώτα θα χρειαστεί να βρήσετε το CitiScape Skyline, για να μπορώ να δοκιμήσω με το CitiScape Skyline στον καλύτερο δημιουργείο. Λοιπόν, πρώτας, θα τα κομμάσω με το CitiScape Skyline, και θα χρησιμοποιήσω με το CitiScape Skyline, για αυτό. Βέβαια, θα χρησιμοποιήσω με το Mixed Media Paper, από το Ranger, και θα χρησιμοποιήσω αυτή η σκουριστότητα, γιατί θα χρησιμοποιήσω ένα σκουριστό οξιότητες, και θα μπορείτε να σκοτήσετε πολύ με το νερό και δεν θα θα χρησιμοποιήσω. Λοιπόν, τώρα έχω το σκουριστό οξιότητα, αυτό είναι πώς θα χρησιμοποιήσω με το background, το Night Sky. Θα εγγραφήσω με το CitiScape Skyline, θα χρησιμοποιήσω με τα δύο δυστρασότητα, θα χρησιμοποιήσω με τα πλέντες τούλες, και θα χρησιμοποιήσω με το water and spray. Θα εγγραφήσω με το Violet και τα φαίδια τύπια, πρώτα θα χρησιμοποιήσω μετα αυτή η σκουριστότητα, πριν από το myCraftMat. Θα εγγραφήσω με το water, πάνω να δούμε λίγο βαμβουλί, βρίσκοντας από το myCraftMat, και τώρα θα εγγραφήσω με το myCraftMat. Δεν θα χρησιμοποιήσω πολύ για την πρώτη λέα, θα εγγραφήσω και θα χρησιμοποιήσω. Θα εγγραφήσω αυτή τη δυστρασότητα, και αυτό είναι ό,τι έχω. Τώρα που έχω αυτή τη δυστρασότητα εγγραφήσω με το background, θα εγγραφήσω με το DarkenUp mySky λίγο, πάνω σε αυτή τη δυστρασότητα, θα χρησιμοποιήσω μόνο φαίτιγινς, χωρίς να δημιουργήσω μόνο βαμβουλί μου. Θα εγγραφήσω με το myCraftMat. Και τώρα πάνω να χρησιμοποιήσω με το myHeatCan και θα εγγραφήσω αυτή τη δυστρασότητα. Τώρα θα πρέπει να θυμάστε να εγγραφήσω ένα λέα πριν να δείξετε ένα σκουριστό, γιατί αυτό είναι πολύ πολύ δύσκολο. Και τώρα που έχω όλα αυτή τη δυστρασότητα στο μου πάνελ, θα χρησιμοποιήσω με το darkenItUp και τώρα θα πρέπει να εγγραφήσω με το paper, με το disres Oxide Inks και το myBlendingTool. Λοιπόν θα εγγραφήσω με τα δυστρασότητα μου και όπως πάνω να δείξω, αν έχω ανοίξει πάνω από πάνω, όταν θα δείξετε ένα κλωσόνι και να δείξετε αυτό το πάνελ, θα μπορείς να δείξετε όλα που είναι στον εκεί. Τώρα, φυσικά όταν έχω φιλήσει με το myColor, θα πρέπει να σπράσω έναρδευματικά, which is going to activate the ink and it's going to give that beautiful chalk finish oxidized look. I'm going to hit set that and now just to darken it up a little bit more, I'm going to add some black soot. Now in the Distress Oxide Inks line there is not a black ink yet and I hopefully we will get a black one in the next release. So I'm going to darken up the edges and just by darkening up the edges I already have a beautiful sky there. Now to make this background even more interesting I am going to do some stenciling just because I love it now you don't really need to do that and today I'm going for a more masculine looking card but definitely you can give this card to a girl as well. The alphabet stencil that I am using is from the latest release by Tim Holtz from his latest collection of fast stencils and I'm going over it with my blending tool and some black soot. So I'm happy with how my sky is looking and all I need to do is to add some stars. For that I'm going to add a little bit of gesso so I added a blob there I am going to dilute it with water just to make it more runny and I am going to use a very thin brush the thinner the brush the thinner the splashes and I'm going to apply some splashes all over there now just because gesso is diluted with water the water when it touches my paper is going to react with whatever is underneath so this is going to make sure that my white splashes are not as vibrant as you would expect and it's going to blend nicely with everything that is going on there. Now that my sky is ready I'm going to cut out my buildings so I'm going to cut both of them I am using black cardstock to do so and I'm going to run them through my big-shoot machine and now that I have my buildings cut out I'm going to make sure that I poke out all those tiny little pieces from the windows in order to have all those windows light up I decided to cut out those two building dies out of gold cardstock so this is where I have already cut it out and just to make sure that all those windows are not going to make holes before I popped out the die cut I am making sure that I stick those windows at the back so I'm just using some tape there making sure that all those windows will stay put and now I am ready to pop out my die cut and you will see that all the windows will stay in place this way when I place the black buildings on top of the gold ones you will see gold coming through all those windows and the idea is to place the black building on top of the gold and you see how the light comes through now I'm going to show you magic here I'm going to offset them a little bit and you see how dimensional they become as if they are lighted by the moon which I think is just beautiful it's a great effect for a card and by offsetting it right or left you actually change the position of the moon up at the sky I am going to stick one on top of the other now for that I'm using my Nuvo Glupen and this is the Nuvo Glupen with the large tip and I'm going to make sure that I offset a little bit and I'm going to repeat the same process for the other buildings and as I'm doing that just to remind you that you can find the full list of all the supplies that I'm using today down below in the description area as well as on my blog and I am linking to multiple online shops so that you can choose your favorite and check the prices but also I am making sure to link to european online shops for my european audience so make sure to check the links down below now it's time to assemble my card so I am going to place one skyline on top of the other for that I'm using some foam tape at the back this is going to add some beautiful dimension which is much needed when you stick those buildings one on top of the other and all I'm doing now is just using my scissors to cut out little pieces making sure that I pack up everything now I'm going to peel off the tape and stick that at the very bottom of my panel so this is going to be the first layer and now I'm going to repeat the same process with the second row of buildings of course I'm going to use my scissors to cut out the excess now it's time to add the sentiment and for that I am going to use this set of dies by Cezix this is designed by Tim Holtz and it is packed with words now you can combine different ones to create your own phrases and I will go with best of luck so I'm just going to look for those three dies here and I am using the grid on my table just to make sure that I align them correctly they are all nice and straight and just to hold them as they are I'm going to use some washi tape to tape over them this is going to make sure that I have everything straight all three dies in a row I'm also making sure that this is low tag by sticking it on top of my hand just to make sure that I will not ruin my beautiful card now and the truth is that I did tag one next to the other to close so you will see that when I cut it out they don't have enough space in between the words but if you recreate the card make sure that you add those dies just a tiny little bit further away so I'm going to bring in my big suit here and this is where I realize that I have all that dimension on my card that I don't want to flatten up so the truth is that I managed to save that just because those dies are only at the top so I'm going to run only the top and go back again and I made sure that I didn't make the mess out of that now if you recreate the card here's another tip make sure that you cut out the dies the sentiments before you go ahead and stick the buildings on top now very carefully I'm peeling off my washi tape and I was lucky that I didn't ruin my panel there and you will see the beautiful effect when I remove those dies I'm going to make sure that all the letters are popped out and I'm going to back this with gold paper just like I did for the buildings and it's going to give a beautiful effect I used my 8G gun to add my tape adhesive at the back all around the sentiment and I have already cut out a thin strip of that gold cardstock that I'm going to stick on top with making sure that I cover up all those letters so when I turn the panel on the other side I get this beautiful effect and you see that the words are really too close to each other just make sure that if you recreate this card you leave just a tiny little space in between and the truth is that I don't really mind if it did bother me a lot I would make this card again but I think it's still such a beautiful card it's really striking I am adding some tape adhesive at the back of my panel and I'm going to stick it directly on top of my card base now my card base is made out of black cardstock and that's a standard card that's 4.25 x 5.5 the panel is slightly smaller so this gives me a beautiful black border all around and that was the card for today I hope you had fun and got inspired and if you did don't forget to leave me a comment as well as give me a thumbs up or my youtube channel here are some close-up photos of the card that I made today don't forget to subscribe if you haven't done so already and if you need more inspiration you can click any of those videos on your screen right now thank you all for watching