 We just made this leaning bathroom ladder shelf and we'll show you how we did it right now What is up welcome back? Do you like to do a builder and make it yourself? You should totally subscribe to this channel because that's what we do Hit the bell to be notified because we do one of these things every week. Okay, this week. We're building a bathroom Ladder shelf rack that goes over the toilet for extra storage. Who doesn't need extra storage in the bathroom for like toilet papers Animals not putting toilet paper on it That will be him. This will be for decorative things. Maybe some extra hand towel stuff like that. Popory Step one make all your cuts cut your wood. We've already made our cuts At a one by six cut at 24 inches a one by eight cut at 24 inches and a one by ten cut at 24 We got a bunch of one by three three of them. They're all cut at 24 inches 24 inches Then we cut two one by threes to six and a quarter two at eight and then two at I ran out of hands 10 I should have been ready Step two, we're gonna put together the shelves. Let's start with the smallest one first All right, we're using these plans from Ryobi nation these are plans from Ryobi's website by Anna white Oh, Kola Kola. We'll put the link down below. All right. I'm trying to go easy on the glue Yes, we want to stain it. You don't want that glue spooching out You've got glue on your arm previous project Remnants. All right, so let you lay it down Do-do-do-do-do Oh Using a one and a quarter inch brad not the guy just the nail We all know brad's better than a quarter inch. We all know Garrett likes to go glue heavy One coat one coat kind of guy. Yeah, one coat Garrett. And that was easy shelf Shelf number second verse same as the first and out of ten inch Make yourself some legs a full two by threes Brad is nicely against the wall, but we'll put those Ryobi instructions down below. They have better details We use the shelf to see how far apart our legs will be the board so that we can work on and know that it's 24 inches next we took some scrap wood and We measured up 37 inches on both legs and put a piece of scrap wood on there because now we're gonna attach the shelves We're gonna use a screw to attach these to the legs all the way up. Nice It goes away