 Hello, my name is Quinn Kimmet and I'm Vince Devine and today Well, I'm gonna be showing Vince how to use the ATEM Mini to live edit. That's right Very excited. Sounds good. Let's hop to it So this is the back side of the ATEM Mini So the first thing that we're going to do is we're going to go to this power Take this Plug it in next we are going to skip the ATEM control the ATEM control Can be hooked up to your computer if necessary, but we're not going to do that today We're going to go to the USB out and into our USB out. We are going to plug in our drive drives plugged in Now comes the HDMI out and in the HDMI out we are going to plug in Program monitor if you can see right here Turn our program under on and we have no signal and that is because we need to plug in our cameras and Then we have mics one and two we're going to skip those for now But that's the back side of the ATEM Mini now let's get into the editing now There's a whole bunch of buttons here, and they're really Confusing at first, but we'll start with these nice colorful ones down here The first thing you need to know is that green means preview and red means program There are four possible cameras that you can plug into the ATEM Mini Pro and so if you want to you can Cut between The program and the preview by hitting this button right here. You can see when I press the cut button It switches back and forth Up here in the upper right corner is the record Stop on air and off buttons recording and stopping is when you're doing live editing and You can Press record and it will go directly to your drive and then you can hit stop On air and off is just the same as record and stop But it's if you are live streaming now if I click this M slash V in the lower Left corner of the video out section. You will now see that everything is displayed on the field monitor So you can see the preview the program all cameras Etc. So if you see me cut Preview and program will switch and so on if for example You only want to see what you will see in the final product You hit this lower right corner button on The ATEM Mini which is program you will see what is on program At all times no matter what I cut to if you want to do some sort of transition between your Cuts rather than just a plain cut you can go to this effect Panel, let's say you want to slide from the left from the top fade and Squish from left as well as the mix And the dip to white If for example, you want to change the duration of an effect You can go over to the duration section So that can range anywhere from half of a second to two seconds to say I want to mix with half a second see it's quite fast or I can mix with two seconds and And Now the final section that we'll be covering is the picture and picture section So say you want to display both camera one and two at the same time You can turn picture and picture on and you will see that currently in the upper right hand corner There is camera one I can switch it to the upper left hand corner Lower left or lower right and once you want the picture and picture to be gone Just click the off button And that concludes the lesson on the ATEM mini. Well Vince, have you learned something today? I did I learned a lot about live editing on the ATEM Sweet now. I believe it is your turn to show me something hmm Well, I do know how to blow my nose so it sounds kind of like a horn Do you want to hear that? Yeah, of course. Just pull out a tissue That is Impressive. Yeah, what did you think? Jeez? I wish I could do that All I can do It's unfortunate Don't get it one day