 A how-to guide on setting up your tripod. You will need a tablet or mobile device, a tripod, and a mount compatible with your camera. To begin, pull tripod legs away from one another. Then, unlock and extend each leg to your desired length. To attach your device to the mount, turn the knob on the back counterclockwise to unlock. Turn the mount right side up. Make sure the threaded hole that will connect to the tripod is facing you. Hold both the bottom and top of the mount and pull in opposite directions. Place iPad horizontally in mount. Gently push the bottom and top of mount towards each other until the iPad fits snugly. Carefully flip the iPad and mount upside down and turn the knob clockwise to lock in place. If using an iPhone, simply stretch clamp and insert phone horizontally. Next, remove tripod plate by pulling lever counterclockwise and sliding plate towards the lever and lifting up. Now, attach to your mount by placing the screw into the bottom of the mount and tightening with the plate's knob. You may now reattach the plate by pulling the lever counterclockwise and sliding plate away from the lever and pushing down. Release lever and push closed. Make sure your device is horizontal. Video shot vertically will leave unwanted blank spaces when played on the majority of viewing devices. Make sure your camera is level before filming. Adjust your tripod leg so that the bubble in your bubble level is centered. You are now ready to begin filming your video.