Loading...

Tamper Attachment

3,530 views

Loading...

Loading...

Loading...

Rating is available when the video has been rented.
This feature is not available right now. Please try again later.
Published on Jan 31, 2009

The Mitchell Tie Tamper attachments handles spot maintenance tamping needs and effectively reduces track maintenance cost




The Mitchell Tie Tamper attachment is designed to fit loader backhoes and mini-excavators. The tamper is capable of tamping railroad track and carrying out a full insertion, squeeze and removal of tamping head at one side of the tie, swing to the opposite side of the tie, with full insertion, squeeze and removal of work head in less than 60 seconds. Thus, a production rate of 60 ties per hour (single squeezes) can be achieved.




The Tamper can be manufactured to fit a quick coupler so the attachments can be attached and removed in seconds. The unit has 4 tamping tools with a common vibrating unit. The tamper rotates 45 degrees so is can be easily aligned over the rail. The tamping tools are capable of inserting a depth of 21 inches beneath the rail level.




The tamping unit can vibrate the tamping tools at 70-110Hz with a tip displacement of 3/16 inch, and generate a down force of 300 lbs per tool. The tamping tools can squeeze the ballast under the tie with a force of 675 lbs per tool




Hydraulic requirements

1. Hydraulic hammer circuit that will be used for the vibrator: 20 GPM at 2500 PSI

2. Rotate tamper right and left 3 GPM

3. Open close tamper 10 GPM

Loading...

to add this to Watch Later

Add to

Loading playlists...