 one Shaber 1000 here today Shaber shop shenanigans I was gonna save this for late night but I have to have this we're gonna check this out and find out what's going on it's acting really strange you will see here in a second stay tuned okay guys so this is a excuse me a little fan I keep beside the bed and just got high and low it doesn't ask you later anything but you can adjust it up and down I knocked it off my little pedestal I got it like a little old an old computer sitting beside the bed and I had it sitting on there and somehow knocked it off I'll show you what it's doing and I think I know what the problem is but I'll put it on low see it works okay there but it was getting to where it if it fell forward it would come out and touch that but I see an issue down inside there I don't know if you guys can see it but there's a little clip right back in there see a thing flipping around there's a little clip there all right that clip is falling off so I gotta take this off it needs cleaned anyway so we're gonna take this off try a little screwdriver this is work all this is it's clipped on here with these little clips and most of the time they break so if we can get this off here without breaking that would be nice but if it does it's no big deal I'll just put it back together with some zip ties okay there's just little clips I'll show you here in a second needs cleaned up real good this is something that came from her dad's for them little clips right there see a clip for him there okay now what it did was it actually stopped it went and stopped that's because this thing came out and it's because this little clip here came off there and what that's supposed to do see that's kind of loose there but what that's supposed to do is keep that tight around that shaft okay but that's all right what we're gonna do I may put a little contact cement on there just to kind of help hold it but what I'm gonna do is I'm gonna take this part oh it doesn't okay so this is built all together on the on that it looks like yeah this is all one piece all right anyway what I'm gonna do is I'm gonna take this out in the kitchen I'm gonna I'm gonna clean it off real good I'm gonna clean this off real good and I'll just probably blow this out with some compressed air or something and clean it up the best we can and we'll put this back together this is a quick video like I said I was gonna wait till late night this would have been a perfect late night video but the thing of it is I really need it I mean this really helps you know because it doesn't blow too much and it doesn't blow the worst not enough and it does have a high and low and it's very quiet it's very quiet fan okay I may put a little drop of oil down in there I don't know we'll see there's a screw here I can take out that'll probably take the motor out let's try it and take this off of here might as well right we're here and take this out take that off and we're gonna go ahead and take this little screw out here I did get that new piece for the boat it came in today it's right here so if it doesn't rain tomorrow we'll put this on I'll show you how to put that on in case you have something similar that has an issue so at least we can we can wash this in the sink at least not yeah this and that will fall out I don't take it out and I'll lose it so sit that over there this over here yeah see that's all bolted in there together I'm not gonna mess with this because it really doesn't need it I can blow this out like I said with some compressed air and I think it'll be fine so that's what we're gonna do I'm not gonna bore you with that because it's just just cleaning stuff I mean we we all know how to and if we don't we even if we do sometimes we act like we don't so our wives don't say hey can you clean up for me don't know how all right guys I'll be right back let's put this together like I said I may put some cons put some contact cement on there with some of this stuff that way if I ever have to take it apart you know it'll come apart a lot easier than super glue in it so it's just a round shaft I'm gonna clean that shaft up a little bit on it okay so let me get these parts cleaned up and we'll assemble it when I come back okay guys we're back all right so what we're gonna do first I'm gonna put a little just gonna put a little bit of this on there just a tad bit just enough to keep it from slipping this contact cement so what you're gonna want to do you can see I got that all cleaned up is put a little bit on both parts that you're going to be gluing together it's probably overkill right there now I'm gonna put some right down in there just kind of like a patch in a tire or not a tire but a tube and in or two okay so that way it's not it's not gonna be stuck on forever you know what I mean so now I'm gonna go ahead and I'm gonna put my clip on here and about there squeezed it in a little bit take some of this off because I don't need that much on there all right now we're gonna clean up pretty nice this is an old fan it's a cheapo fan it's a Massey I think it is I want to stick that on there I'm not gonna turn it on yet okay now we're gonna put this back on it's like this we'll get our sits got a little it's got little indentations in there for for your nut so your not came only got one way and it'll hold it for you I'm gonna stick this in here and we're gonna snug her up a little bit like that yeah Massey and we're gonna so I'm gonna try to get this where it's as straight as I can get it I bought a fan one time it really bothered me the the it was like just a little bit off and you couldn't straighten it it'd go too far one way or two for the other way there was no in between so I ended up taking the cage off popping this off and gluing it putting the cage back on then gluing that on straight so that kind of thing bugs me that one's pretty straight there so I'm gonna go ahead and you just want to just kind of squeeze it back in there and there it is it's done now let's let this set up for a minute and I'll get you turned around all I did was blew this out with some air and as you can see just wiped it down a little bit it'll be fine I didn't shit I didn't feel like taking the motor out of it so that's kind of how you clean that fan I did another one it was a black fan it's over on my desk which is a horrible mess I got to get it cleaned up that's kind of in here messing around today just kind of situating some tools and I've got a bunch of wrenches and stuff I need to get find a place for I've got almost a whole another set of wrenches that I had found so I'm gonna put this up here I brought this down because I was cleaning something earlier I left it down here just in case we needed it but we didn't so okay let's get you back here behind of where I'm standing and I'm gonna let it set for a minute let that glue set up we'll give it a shot okay guys been about five minutes I think it'll be fine with just it was just a little bit how we put on there yeah I wish you'd have seen it yesterday if you turned it you could actually see the fan blade drop down and hit me inside there so let's check it out we'll go with low let's go high easy to fix I love this little thing because you know I mean it gets hot down here before a couple nights though we we got to open the window up because it got down to like 76 77 area it had a nice breeze so we got we got a bigger fan it's like on a pedestal that I that I had in here I was going to use in here but I took it in a bedroom for monkey to use and we put it in front of the window and let it suck the fresh air into the bedroom and so that's where was that one went but I still got this one over here the vintage look of one but it's not vintage I don't think we ever had to do anything to that one not sure but anyway yeah we got that when it doesn't eat clean but it does work it just takes it a second once you flip the switch on usually when you when you flip a switch on on a fan the first notch is high and that's to get it going on this one the first notch is low so sometimes you just like flip it on to high and then back on to low and it works beautifully might need a little oil we may check that out on a late night some some night but anyway that's how you clean your little tiny fan seems to be working pretty good so like I said it's it's quiet you know it's not a big it's not a gigantic fan it's it's kind of quiet so anyway guys just want to say thanks for watching appreciate it thanks for supporting my channel don't forget check out monkey 1000 channel and at the end of this video on my outro when it says thank you so much for watching if you give it a second they'll be playlist you know and a subscribe there if the need arises that you want to you want to do a shea bear binge or shea marathon and you know click on one of them playlist or you know I'll have two playlists a video and a subscribe button just in case you know you like my videos and I wish you would please hit the like button if you liked the video and if you didn't hit the dislike button twice so I know you didn't like it and were to improve on thanks for watching guys appreciate shea bearer the myth the man the legend gone for now bye bye guys take care