 Good morning from Canada today. I feel a little bit like Kim Kardashian. Do you guys know why? Yeah, because I want to change that because I want to change my rear end That's right We are gonna change the rear end of the school bus and it might be today, but that's on our list of things to do All right, so we went over this before but the proper way besides telling a dealer your VIN number is to get back there and Get the tag and see what the rear end ratio is Yep Ratio 411 really No for Is it a 411 or 477? No, that's 411. Really? That's weird Yeah, it's 411 already. Really? Yeah What should we drop it down? Looks like we have a 411 you want to explain how to to read this thing Well, what that means is 411 you turn the pinion You turn the pinion once or the pinion turns 4.11 times for every time the wheel turns, right? Mm-hmm. So what you want to do is you got 11 hour 22 5 so I think we'll talk to Igor But I think if we put 24 5s on you'll end the problem I know you will get tires that are just as good as that all right, so Rear end is a four point one one four eleven So for those people who know what that means For everyone else it means I won't be modifying my rear end unlike Kim Kardashian also side note wrote some jobs on the thing and Things to buy and jobs and a little schematic for the coolant for the veggie system Right now I'm trying to figure out what to do here because are you vlogging again? Hey pipe down over there get back to work He's uh, he's working on the side support thing We still have this to do but we've got to re-thread it so I haven't done that It's kind of hard here because we have like I feel like we have a handful of jobs and they're all like half completed because of Not having the proper threads not having You know It's finally sunny by the way weather rain delays and not being able to go and get apart in town because town is 20 minutes away the big city's an hour away things like that so We're just I don't know what I'm gonna do all right Kodak went out of business, but we have a Kodak moment here. What's going on? Well, we got this nice beam that is almost fitting perfectly. Thank you You know an almost straight line on a school bus Only people who are building school buses are gonna probably get that joke because nothing straight on a school bus but yeah, so what we have to do here is Because they used to be an emergency door here. There was no beam So we have to re-weld the structure of the bus so that Jack's here if anyone decides to hit him on a side Impact, he'll be a little bit more safe. Yeah, just a little bit and by the way if anybody doesn't know how safe these buses are Just look on YouTube side impact school bus and if anything hits me I feel really bad for you because you're gonna get worked. Okay. Where were we had to run the town? I got some rivets and some adhesive stuff here, but it looks like somebody was up to Some work over here You want to share with the class what you did? I Welded in the support beams for the max fan. Yep for the did we tell him yet? Nope. Nope did something else and Then I finished off this Window area so we get some sheet metal on there nice So we are gonna make this nice and flat and then we're gonna take the little bump guard things Put them back on that just for uniformity. I think right. We're gonna put them back on Are we gonna make it flat? Oh, whatever you want. Okay, whatever you want. He says So up here Well, that's gonna be something we framed it out Not really sure if anyone has any guesses yet, but feel free to guess in the comment section. I won't be confirming or denying anything Involving this space here, but I will tell you it is a first Right to our knowledge. Yeah, I guess. Yeah, but right now it definitely looks like a convertible So that may or may not be it like I said won't confirm or deny but this is where the Max fan goes in. This is really just for support from the roof All that stuff because you don't really go in from the side What else what else I'm gonna cover up those lights. I don't know if I'm gonna do it today But I'm gonna prep for that. I think what else is going on in here if you like Oh, you're gonna be doing that. Okay, so he's gonna be working on this part today. We're closing that off and This is yet to be explained here, so if anybody has a guess for the passenger side Old the handicap Wheelchair ramp feel free to guess on that one. Otherwise Yeah, we're just gonna get back to work So you see this nasty reflective stuff? We have this wheel here and it can work It's a lot of work though. So what I've been using is this here Heat gun and just for the purposes of a demonstration We'll show you how it works Basically Just kind of heat up the spot now. I do it with two hands at one time. So left hand is in front of My right hand when it's You know Getting it off there Let's see. So basically I just move Both hands at the same time and scrape and heat but watch how easy the stuff comes up All right, so heated it up Of course for the purposes of this demonstration, it's not so easy But anyways take my word for it. That strip is gone. You know There's things that I'm learning on the second time around that I didn't know the first time around That was First time I ever use the heat gun by the way I don't remove it. I got wrapped over with the Graphic rep I had before and then it had a little Little crease on it just like Actually, I think that have school bus on there. Yeah, just like the school bus part if you don't take it off Even if you paint over it, you're still gonna have that little Bump over it where you can see what it said before so between the eraser wheel This is what's left over from using the eraser wheel You could get those little things off with the eraser wheel heat gun is the best thing for these things these things being the reflectors and The eraser wheel Is the best thing for the lettering because if you use a heat gun I tried it on just those two words right there one or two words and it just like melted it Turns in a tar so use your eraser wheel for the lettering Never existed that's because he has so much knowledge There. Oh, yeah, we can do that. That's really easy showed us how to fix the floor in a short amount of time So I'm gonna go with the grinder and then Michael's gonna follow me. Yeah, so Michael's gonna follow me. We're gonna head