 Γεια σας! Είμαι Βικη. Είμαι στην Σταμπερία. Σήμερα θα δημιουργήσω αυτή η μικρή κανβάση για κρίσμα. Ας ξεκινήσουμε! Αυτό είναι ένα καλύτερο κομμάτι που είναι 12 x 12 x Σταμπερία και θα χρησιμοποιήσω αυτή η μικρή κανβάση. Έχω ένα κανβάση που είναι 20 x 20 cm ή πάνω από 8 x 8 μιντρια και θα χρησιμοποιήσω την κανβάση της δεύτερης κανβάσης Αυτό είναι ο οποίος θα εξέγω να χρησιμοποιήσω ένα κομμάτι που είναι κοντά. Είμαι διακευ惜θ με τον ρουλαbird για να βοηθήσω πάνω απλά το σάλι μου και θα χρησιμοποιήσω ένα κομμάτι από αυτό το τηνγούδι δ environments που έχω ένα ωραίο κομμάτι στο σπιλλό. Έχω φορ 있는 πανό μοτοκράτω λευκάρα από το σάλι μου, για να παρακαδείς αυτό το κομμάτι μέσω από τα δυνατόκραρα κομμάτι. Σταμπερία είναι ένα κρατικό κοιμό με καλύτερες παράδειγματα, they have an online store and you can find a full list of all the supplies that I'm using today just below in the description area as well as on my blog. The scrapbooking paper that I am using today is a specialty paper with glitter in some areas. To make my scene more interesting I will be using this snow pen that has a nice fine tip and I will be adding some snowflakes on the background. I will be using this 12x12 pattern paper which is also by Stamperia and I am going to cut it out in strips of paper so I can cover up the whole frame. I am also going to cover up the insides so I am using my ruler to measure exactly how thick I want those strips to be and then I will be using my brush with mixed media glue and I will cover up everything. By using this pattern paper I will cover up all these ugly stables that you can set the moment as well as the edge of the canvas. Notice how I use my ruler and my craft knife to cut out my strips of paper into 45 degrees. This is going to help me achieve a more realistic look for my frame. With my gold ink pad I am going to ink the edges of all the strips of paper before I stick them down and I am also going to add directly on the canvas a little bit of this gold ink. This is going to ensure that if there are some tiny areas like the edges that are not covered up with pattern paper you won't be able to tell. The canvas that I am creating today is a very fun project and it can be also a great gift or you can use it on your own home and decorate for Christmas. Now I have covered up everything and I am going back with my gold ink just making sure that there are no edges showing through. I will do the same thing on the edges from the back and just because you will be able to see the sides once you put it on your wall I want to cover up the sides as well. I will be using some gold deco tape, it's like washi tape and I am going to cover up all the edges. To create a window I will be using this acetate as if it's glass for my window but if I stick it directly on top you will be able to see the adhesive, the glue. So just to make sure that I hide the adhesive I am creating a border for the acetate where I can hide the adhesive at the back. So I have cut out four thin strips of paper out of the same pattern paper and I am placing some double sided tape adhesive at the back. Now I am going to place the acetate on top of my window frame and I will stick all those four borders around the square frame. Now I am placing some post-it tape to make sure that my acetate is not moving and I can stick everything creating my frame. Once everything is down I will be using my scissors to cut out the excess acetate and I will end up with a frame that has acetate inside as if it's window. My window frame is now ready and just to make it even cuter I have cut out a couple of strips which I am going to stick at the centers just to creating a cross. Now I notice how I am using the grid on my mat to make sure that everything is centered and I have that cross exactly where I want it to be. And I will be using my gold ink pad on the edges as well just to make everything come together. I am going to stick this on top of my main frame and this is why I am going to prepare the back by adding some double sided tape Just where the borders are and you can see here how thin my double sided tape is and it nicely hides behind those borders. Today's video is a mixed media canvas but at the same time is a shadow box and if you look at the pattern paper on the outside of the window it's snowing so I am going to add some snow at my window as well. To do so I am using this snow paste which is by Stamperia and I am going to apply it on my window. I am going to be using a piece of scrap piece of paper just to make sure that I don't mess everything at the back of my window and I am placing it just where those borders are. Just imagine if it was snowing outside of the window where would this snow sit on your window frame. Now my window is almost finished just missed a spot there and I am going to leave this aside to dry. Now the paste doesn't take too long to dry and now that my paste is dry I am peeling off the tape adhesive and I am going to stick it to cover up my window and I really really love the effect. Once I stack this down I realize that at the bottom and outside of this frame I didn't have enough snow. I am going to show you here what I mean. So I decided to peel off just a little bit the window and add with my spatula more snow at the bottom of the wooden frame. This is going to make it more realistic looking when you are looking at the inside of your shadow box. This snow paste once it dries it really gives the look of snow and it's super easy to apply with a spatula. It dries very quickly and I really love the effect. And you can see now how much snow I have just outside of my window. So I can move on. Now I will be using this wood veneer piece that says piece on earth and I am going to cover it up with gold acrylic paint. You can use a brush to apply the paint but I decided to use this sponge dabber that makes it super easy to cover up the area just because it's flat. But at the same time once I dab up and down it gives a nice effect. You can wash those brushes with water and soap and they are as good as new. But for now I am going to place it temporarily on a jar with water. I don't know if you can see the dimensional effect that I got by dabbing the sponge up and down. Maybe you can see it better in this photo. And now it perfectly matches the sides of my window. So now I am going to move on and I will be using those stickers. And there is one sticker that has two birds which I don't need to use birds inside the house at the moment. So I am going to cover those up. I am going to use some white glue and this happens to have a nice fine tip. Which makes it really easy to apply it at the back of the wood veneer piece. The project is pretty much finished but I wanted to embellish the window frame just a bit more. So I will be using some stickers by Stamperia as well as some paper chipboard pieces. And I am going to create a couple of clusters to add some interest. Just as I said before you can find links to all those products that I am using today. Just below the video in the details area as well as on my blog. I have this set of tiny little bottles by Stamperia which I think are just adorable. And I wanted to incorporate them on my project somehow. So I am trying to decide which size of bottle would be nice for the project. And I decided to go with the tiniest one. And I am going to add inside some gold glitter. I am creating a tiny funnel with paper so I can fill in the bottle easily. I am just using a spoon. And once my little bottle is full I am going to put the cap on. And now I have a tiny little bottle full of gold glitter for my project. For the outside I am going to use a piece of sticker. This is a tag sticker from another Stamperia set. And I am going to cut out only the piece that says For You. Which I am going to stick on top of my bottle. Don't be afraid to use your scissors and cut out the stickers that you already have. And make them work for you. Just like I did here with the tag. I have used gold thread. And tie a double bow around my mini bottle. And just to make sure that this bow is secure. I am going to use just a tiny drop of white glue. Where the bow is. To stick this tiny bottle on my project I am using hot glue. So now I am sure that this is not going to go anywhere. I decided to add a few more stickers on my clusters at the two corners. So again I am using my scissors. Cutting out pieces out of these stickers that work for my project. I am also going to use this red banner at the top of the cluster. Using some tape adhesive at the back. I am just trying to make those two clusters. Looking more full and interesting to the eye. But you can basically stop at any point. I just kept going and going with this project. Because I really had so much fun creating it. And if you want me to share more projects like this one. More mixed media and canvases and shadow boxes and things like that. Make sure to leave me a comment below. This wouldn't mean of course that I would stop posting my regular card making and art journaling videos. But I can always share more DIY and crafting projects that I do to decorate my house. As well as to give to friends. So that was the project for today. I hope you had fun and got inspired. And if you did don't forget to leave me a comment. As well as give me a thumbs up on my youtube channel. Here are some close up photos of my canvas today. And if you haven't subscribed to my channel already. To hit the subscribe button. So you will not miss another video. And if you need more inspiration. Here are two more projects that I made using Stamperia products. Click on any of the videos. Or if you are watching from a mobile device. You can find links to both those videos. Just below in the description area. As well as on the info button. That just popped on your screen. Thank you all for watching.