Magic Flight Launch Box DIY with details on things you need





Rating is available when the video has been rented.
This feature is not available right now. Please try again later.
Uploaded on Jan 4, 2012

MAJOR CHANGE: use steel wire for the two contacts (I used that circle keychain thing, it works great!)

- Stripped RG6 copper-clad steel coaxial cable to make the battery contacts/cables
- CD case (or other clear plastic sheet)
- Stainless steel tea ball (can be bought at: dollar store, coffee shop and cooking store)
- 1 piece of wood of any kind, the real mflb is 2.5" x 1.25" x 0.9", but mine is a bit different
- 1 small screw to allow the plastic piece to rotate
- Energizer Recharge basic charger (comes with 2 2000 ma/h NiMH rechargeable batteries)
- [optional]Staple's plastic throwable pensils, or something like that... (for the stem piece)

- 1" drill bit for the "ingredients" hole (smaller than the real thing)
- 9/16" drill bit for the battery slot (mine is 5/8", but slightly too big)
- Other drill bits for the contact holes and stem hole
- Saw or band-saw for all the cuts
- Any type of drill
- Sandpaper for the beauty :)

- CD case plastic is a pain in the arse to cut, it always brakes, might wan't to consider something else
- Works best with 2700 ma/h batteries, but will still work for the first few hits with 2000 ma/h
- Total cost of 20-30$ if you already have the tools and drill bits, which 15$ is spent on batteries and charger, but still beats 120$ :P
- For best performance use steel contact cables, ex: round keychain thingy


When autoplay is enabled, a suggested video will automatically play next.

Up next

to add this to Watch Later

Add to

Loading playlists...