 Hi everybody it's Sam at Mixed Up Craft, thank you for watching my tutorial today. I'm going to be showing you how to make the six by six wiper card and this is how it looks. So it's a little bit different to the other ones and this time I've actually cut an aperture into the center of the card so you actually have the pop-up or the wiper part within the middle of the card and I think it gives you a really nice effect. So it looks lovely like that, reminds me of like a just a nice field of tulips there and then I've got the happy birthday sentiment that comes with the set and then you just pull it and out pops the hand with another bunch of flowers or bouquet of flowers and you've got all that room on the back there to stamp and write your message. A couple of others using the other sizes so I have one, another one using the six by six. If you see there I've got the smaller aperture just with the giraffe there and then out pops the other giraffe at the top so I just wanted to show you how you can create these I guess inner apertures within the wiper card and it looks really fun so it's that version and then I've got this one here as well which is just using the six by six wiper as a you know as it comes really so there's no aperture in this one but I just wanted to show you how it looks without as well in case you haven't seen that and I've also got here a five by seven version using that five by seven wiper die and again you just pull it open and it pops up the giraffe and it's behind that sheet of acetate. So they're really fun really easy to do so let me show you how. Okay so these are the three things that I've used so this is the stamp set the funky flowers and it's the A5 stamp set and I've used the bouquet and the hands there and then you've got the dies that go with it so they will die cut again the bouquet and the hand and then this is the six by six square wiper die set so I've used all of this and I will be using the layers as well I've already cut one and then the happy birthday and the wiper part there as well. So what you need to do is die cut first of all two of the six by six wiper which is this one here so I've got this one I'm using this pink again here and then what I've also done is I've gone ahead and die cut in the cream but I've already stuck it onto one of them you can see there we've got that nice frame and you've got your score lines you just want to fold one way so just folding so you have a mountain fold and then fold back so you have a valley you'll do that on both of them you can see there we've got the side. Now before you fold that if you want to cut that aperture then this is what I'm going to be using here so I've just got some square dies from my stash so we'll stick that and do that in a second you will also want to die cut one of the mechanism and I'm using acetate here and it will cut through your die machine you might have to add an extra shim if you've got a metal shim then perfect but it does cut through and that's obviously the matte layer and then I've gone ahead and die cut the happy birthday I do seem to just be making these quite dimensional I really like them layered up on top of each other so I've just got the three there and I'm going to stick those and then I'll back them as well just so it pops out a little bit more let me just pop them together there you go you can see they just get when you once you add that thickness and you pop it against the cream there it creates its own little shadow and just gives it that depth so it's really good I have done 10 of these I think it's 10 and then one for the actual you know to have in the hand to pop out so again really easy to colour a little bit of shading that I've done but you don't have to and you've got the die for that as well so with this one here again this is if you want to do it if I just bring in the card again here so you'll see I've got this aperture but I what I want to do um with this one is we're going to cut the frame cut the aperture but then I also want to put a frame on it I think this one would have looked quite nice adding a frame I do like it like this because I think there's so much detail here and then obviously that pops up you know it does fill that space but I did want to try this one with a frame so first of all I am going to cut this smaller one here now this one measures four and one eighth squared so something around that kind of size and I'm going to sit this in the centre of the square here so this cream square bear in mind you're going to build up all your flowers at the bottom there so you know don't worry if it's not exactly centre at the bottom as long as these are kind of the same here I think that's about right I'm quite happy with that one so I'm just going to pop my washi tape you know take some of the lint and take some of the tackiness you know the stickiness of sorry by rubbing it on your jeans or something and stick it on the section that you don't necessarily want to keep I mean if it comes off fine then I'll keep this in my scrap but don't stick it on this side because that's your frame you want that to be seen so I'm just going to run that through my die machine and then I want to keep that same frame and then get the next size up within your nest of squares so this one is that was four and one eighth this is just under four and five eighths okay and you're just going to sit them inside each other and then I'm going to grab the same pink card you want to tack them together so they don't shift and then you want to die cut that on another piece of pink so I'm just going to bring a piece over here I'm going to get it on there yeah so I'm going to now run that through my die machine okay so now I've got my frame so I can just stick that on there and I just think it just for me I do love a frame so I'm going to stick that one down now just so that we don't forget because we want to layer up all of the flowers on top so I'm just going to add my glue to the frame there and get that stuck down okay next I've got a sheet of acetate and I'm just going to die cut this frame here you don't have to have it as big as that one if you want to just cut it yourself but as long as it's bigger then your aperture there and we can stick that behind before we put it all together okay so I've just stuck some red tape down on there and I'm just going to flick this over and just stick it on the back there okay now we've got our aperture there okay so I've just gone and embossed a piece of four and three quarters by five and three quarters because you don't need it to be six by six because when you've got this piece stuck over the back you actually have that as five inches the back piece here because obviously that doesn't count just emboss that piece but you will need to emboss another one as well if you want to continue it on the sides but those are going to be cream in my case so I am keeping the back still pink because I just think because these have got a white frame they really stand out against that pink background okay so first of all we're going to add the mechanism when it's all together because I just think it's a little bit easier so I'm going to stick down first of all the left hand side so I'm just going to add my glue and then you're going to stick it so you've got your two pieces but you flip them so you have one this side and one this side here so I'm just going to stick that one down like so okay now I can flip that over it's good to use your liquid glue and I am using Kalal glue because it does you know give it strength and you want that kind of strength when you're you know opening and closing the the card itself so this just really does strengthen everything for you so I'm just going to stick this one on the back and this is using the confetti embossing folder which is this one here it's a five by seven but I just want to show you that you can use it across in the six by six so I know you can't really see that against there but it's just that subtle you can see it in there I really like it so that's that one and then we can now attach here as well if you would rather put the mechanism in when it's still open which you can do and I've shown that in some other tutorials then don't do this bit yet go straight onto the mechanism which I'm going to do next anyway so I'm just going to stick that one there next we're going to get our mechanism piece here so you just want to fold and burnish across the triangle in the bottom left hand corner you want to keep it in that kind of bottom left hand corner orientation and then we're going to grab some red tape and I just like to stick it right on let it kind of come over the sides I just think it's quite easy this way if you've got thicker red tape then use that because if you've got one inch wide then it will do it in one kind of you know go I've only got a lot of the thin at the moment so I'm trying to use it up so I'm just sticking three strips of it then I can just peel it off my mat and then just trim off the excess just saves you having to try and work out the angle of the tape there so let's get rid of that that's stuck onto there and then you want to flip it over so you've got the triangle on the bottom right and you've got the sticky part there you're going to pop it in here open up the car because you're going to stick that triangle that sticky bit onto this section here this second piece there's the first piece it's this one here okay pop it in you want to come up about an inch okay so I'm going to bring it up about there now don't worry that we can see it here because we're going to be building up all of the flowers over the top so I'm just looking in there and I think that's about right if you want to pop your bouquet on the top you can but I'm quite happy to stick that one down like so and now when I go to close it it won't poke out the bottom I can just see it there okay like so you can see there how it moves inside to you know pop up so now I just want to die cut this little one here the little hand I'm just going to grab that die and I'm also going to get these three stuck down as well okay I've also just backed it now onto a piece of that cream card so everything matches and I'm just going to trim along there and this is so that all of the bottoms of the flowers all the stems can hide behind this actually got a really nice top of that you can use that on lots of other things as well okay so now we want to grab the hand and I'm going to stick it onto here you can mask this as well if you want to have it as one stamped image but then you'll have to fussy cut that this way you can just die cut each one but I do bring the hand up a little bit higher so you see a little bit of the you know the stems there poking out the bottom like that then I'm going to pop some red tape on the back of this one here I'm going to kind of go up there about an inch okay and then now what you want to start doing before you stick this down is you need to start laying out how high up you want your arrangement to be because you know everybody's is going to be different so yours might not be you know yours might not be exactly the same as mine so I can see looking at this one here I've come up again for anybody that does want to follow it the top of my flowers there you're looking at about just under three and a half inches so I've got an arrangement of oranges and pink so I kind of want to make sure I'll lay them out better in a moment but it's going to be you know something like that I do really really like this so you can see like that and then I'll trim some of the bottom ones there and then that will sit like this okay it looks really really nice but I can see the top of the acetate just here you can just about make it out so I can just pretend to hover this over and I can see that I think actually that's going to be just right so I don't need to trim anything off the acetate because you can still when you bring it down like this I can pick out I can hold the acetate here and you could easily just trim off a little bit from the top if you wanted to okay so I'm going to grab this one and I'm just going to pop it in here I want to stick it like so have it on a bit of an angle there we go okay try and keep it within that square there so it doesn't poke out the top you see there when that one comes up they pretty much come up the same kind of place all right so now with all these pieces you can keep it open like that and you know exactly now where you want to have your top one because you want to be able to see you know the hand but you don't want obviously it to be too you know you don't want it to be too hidden so but with all of these ones because you're sticking on to acetate you do want to add red tape and apply each one using a little bit of red tape you don't need much because you know you will layer them up on top of each other so and this red tape is pretty strong so I'm going to start off with this pinky one here you can push the whole thing flat so it's quite easy to work on and I'm going to pop the first one there and then I'm going to kind of work off each side that way so okay so I've die cut two more of the kind of embossed confetti there and then I've stuck all that down and I'm just going to pop my happy birthday die there on a little bit of foam because I think it will just help it stick over these pieces and you can see the bottoms there I've just trimmed a little bit away I really like this one I love now that it's got that frame around it I think it just helps a little so then I'm just going to bring this up you want it to cover so there's no gaps make sure you've got it you know equal gap there on each side and you've got a nice even bottom part there as well but now yeah I'm really pleased with that I think it looks beautiful and when you fold that down with the acetate you know you might need to just push it down a little bit like so but it does look at that it looks so nice love it and then I'm just going to pop a strip of this on each side and then I would die cut another one in cream if you were doing it pink like mine and stick it on the back and you can stamp your message in there and you know write a little note and everything on the back this will fit into a six by six envelope I would make a bouncy envelope so if you are you know making them and you follow my youtube then when I say bouncy envelopes basically when you make them sit it in the centre of the envelope before you stick the sides and then it will give it a little bit of dimension it will fit your more dimensional cards alternatively you can make an envelope box and there are envelopes box dies I think card making magic Christina has one so you could use that one there's the finished card really really fun love both of them but I do just like this one now with that frame detail on there as well so yeah super fun so I hope you've enjoyed this one hope it's given you some more inspiration to use you know the the die as it is all with that aperture I'll just bring in those other ones again so you can see this one here that's using the five by seven and again this one using the six by six and this is the amazing animals and the party paper pack this is the scenes paper pack and then again this one here every time he pops up it just makes me smile so there they are all those wonderful cards so I hope you've enjoyed the video as always all the supplies will be below and yeah I'll be back very soon with another tutorial thanks for watching bye