 the galvanized stripping all right just as we would start cleaning it up steels have arrived fans locked the big opening then there we go we've arrived a bit late because we've been for this went to james to check the steels coming today let's say yes probably later late morning early afternoon which is not ideal but it's coming that's the main thing so we've been to our favorite higher place Hodgson's thank you Hodgson's I'll flip that around in the edits you can read that properly so there's our genie yes we get so much stick we're not getting a genie but in this particular job we can take the wall down take the roof spars out of the way and slide it straight in back skin's done which we did yesterday so we're going to get the front skin done today we're going to prop it from the back because we can't get the steels in yet then when they got that many acros we can prop it from the back with the acros when the steel comes we'll get the steels in then we'll put the strong boys up on the other side so yeah that's the plan plenty to do and only a day to do it so quick quick one inside back inside so we can get the acros in from this side oh yeah well I forgot we took the wall down yeah so how the hell are we going to prep that up from yeah we can just muddle through from this side temporary acros from this side and then once we get the steels coming in through this window into position here then we can get the strong boys in so we're going to take these probably middle four roof spars out so we get the genie in here and then we can here we go so this is one video where we won't get should have hired a genie lift because we did I think we should get it just put it there and don't use it yeah we really get on the nerves like the digger on that job yeah yeah so um nice and tidy in here now we had another little session on this this afternoon yes the afternoon which is a bit annoying because we could have been on that all day because the weather it didn't rain but um yeah here's what it is um so yeah get propped and make a mess let's go back to the van because the van's open almost had a bit of a calamity a semi calamity you like that one dropped so Alex got the acro in quick and we've got the uh the galvanized stripping okay remember how much it was you just did a roll of it from the screw six or two basically we just put that in scratch the joists and that holds all the bean filling in so even if they they work loose they're not going to drop see the whole solid now and it's a bit we haven't done is this side they seem to be solid for now we have run out of that stuff so hopefully it stays put we could always put an acro under with the meda 3b2 if it starts looking nice loose but so far so good so we've got two acros in the brickwork brain mine is only temporary and of course too low they're basically propping the back of the house so we can take all this out get it all out out the way through the window and all clear it ready for when the steel's come then once the steel's come get him into position but the acro is back with the strong boys on top and it's um humid very very warm no breeze it's breeze what we need that there's no polygons at this end but there's um there's the fluff stuff yeah not much of it i think that fluff's coming next door maybe yeah it's just coming for the cavity from next door and there's done so um yeah because this is the whole back of the house so back to time lapse we'll get the other these other two acros in and then we're gonna have a break right back from room that thing just about in we're gonna leave it there while we knock these two course out yeah we're gonna knock the two out for now and then we'll put the strong boys in later when the steel's come you can see all those loose ones above the angle and we're gonna get rid of them and then we can start dropping this then get that out basically get everything down we're going to take the um window out again so we're just flinched about it they're walking around messing about so um back to um time lapse while we get some of this down that cleaning up steel's have arrived we're gonna figure out how to get this now we're gonna try and get it through the window somehow some way involving taking the strength out okay set up grab one of them blocks out you take one over that way about two foot so a bit flatter than that push it to me a touch okay ready ready one two three obviously now well now it's gonna be the two of us trying to get him in the house so that's that we'll take you inside for the cleanup then so once we've got cleaned up we'll get these monsters in we've got a bag of bolts thank god we've got a gene lift i made the right call there get your set back up in here i'm gonna move the wheels forward or back otherwise it's gonna catch isn't it take them with you take them with you should we both get on this it should get on the window before it leaves the road ready it's just gonna be hard for me here i'm gonna be like this would you just keep feeding it through i'll wait you sort out the wheels okay we're on the false we're on the seal properly now before one sec we're doing for now of course we need to tidy up don't we yeah we can do yeah so we've got to get off that steel then no we haven't got to sit on top of the steel strong boys in let's sit next to it it's got to be on top i thought the brick was on there for there was no brick on the steel it was there right we need to get on there so you keep your stem steady no just like that on the steel this is where i can grow more hey please don't get on this fitting this fit through before now i can't get past this socket um because recovery came in lower just um stay there hold it steady just the both sides up together the brick's there to get the fork something in here but keep me a block i can't do that i need to put the block over there no no if you're not putting on a block welcome back that's going to be a long video to edit that was that easy easy till the last bit wasn't it just once i got to the socket could you have a work keeping this wind because that was dead handy sliding across that so there you go they're in position they're in position for genius i've marked the centre so we know where to get the forks in the centre and you might have to move them blocks again but we'll see so we're going to have some we've put a brick under each end so we can get the forks under here and then it's a matter of well not quite got to get that close to break out first and put all our accros on this side with our strong boys so um do you know what we probably won't even need the strong boys we can probably just prop underneath this wall plate which will be fixed into the wall the wall is solid it's going nowhere so i might do that just take the weight of this it's going nowhere so yeah that's the plan so um accros strong boys maybe maybe just onto the wall plate and genius steels so if you want to have some dinner first right just looking at this we're gonna have to have a little move around this we're going to have to move this pro we have to move this acro over a bit so we can get the forks through here i'm going to move those blocks over there so i've got an easy way in with the genie lift we'll get those two angle lines outside alex said that big one's really heavy and then i want to put two planks down here so that the the genie sat on two flat surfaces instead of these where the walls used to be so i'm going to fill my bottle up and fill the kettle up and then i'm going to go and get help alex get the gene lifting i'll i'm going to move the blocks i'm going to put the blocks back where paul put them there and then they're being the right place then we can just bring the gene straight in and then we'll brush it brush up here we'll put two planks down but this needs moving as well we need to put another one in here and take this one out okay so the the uh let forks will go through right back to time that's where we get organized now later than i'd hoped but there's the bed on the top on the first steel which is going to be hoisted up any second as soon as that starts comes down we'll start listing it well i can start listing anyway um yeah hoist put your bed on first wheeling position then in fact looking at now i've just realized i made a big mistake we're doing the inside still first that's got a tight bed and i've put the big bed on for this side so i'm going to have to go along there and take half of that motor back off again so um uh be back in a second right you've seen that one go time-lapse so we're going to do this one normal speed so catch me in a bit just heads up it sounds like an angry cat yeah so excuse the noise but what will do is we'll get it up and here we go stop the camera and start the game because i'm clear this end that's going to come forward now okay let's take the brakes off i've just realized um are we going to be able to uh bolt in here yeah why does it look like there's going to be a gap oh yeah there'll be a gap not much of a gap but 202 now about 50mm okay probably get your hands in don't mind what cool but yeah okay that should be good it's that and like yeah that and that's the micro-justine this end needs an adjusting there so we wheel this so we're near enough so we're lining it up now and then we go up again so we just get just like touching once we get to there we get the accros in and then we use the accros to actually get into place and put it in tight the accro before that is twisted so we need to sort that out and get the twist out of it so let's get this thing quite a bit more looks okay that i think mine still wants to come in does it yeah yeah i'd say so get too much strain under the it still needs to come up a lot oh yeah no do you want to let wind it with the you're steady mate that the gene is tight now we need to do accros wreckage can you be taking it tighter yeah i want just like that yeah right all the accros now there's one here the world's here see all those glasses are crap aren't they you need to wipe the bottom lid put it right up in the white before still get them wide you got it moving that's it that's it on your knees just a matter of winding up with the accros now and getting tight getting it tight and getting it all in lined up and everything yeah i'm gonna have to go that way is it before we get too too tight with it yeah we'll drop back on to her town and get the rest of this done