 Γεια σας, είναι Vicky� και σήμερα εσύ θα σας δείξω πώς να φτιάξω 3 πιο ξεκίνες με σαντακλάω. Και εδώ είναι ένα κυρίο για όλα τα τρία παντά που θα σημαίνω σήμερα. Τα διαφορά που αφορά να χρησιμοποιήσω σαντακλάω στα σαντακλάω θα χρησιμοποιήσω τις δησταλήματα. Και θα δείξω πού θα αρέσει και τα 3 αντίσταες που μπορείς να χρησιμοποιήσω. Είναι μέσα που δεν μπορεί να χρησιμοποιήσω σαντακλάω. Λοιπόν, για σήμερα είχα asked by Graphic Stock to showcase their website και αυτό είναι ένα σπόνσορδο βίντεο. Φυσικά είχα said yes, αφού όλα χρησιμοποιήσαμε their website, για όλα τα πράγματα της digital image needs και εσείς είχα δει εσύ με χρησιμοποιήσαμε κάποιες από τα πράγματα ή τα πρόγραμματα της art journal. Και πριν ξεκινώ, εγώ ήθελα να δείτε ότι μπορείτε να πάτε στο www.graphicstock.com. Εκεί μπορείτε να κλείτε το λίγκο στην εξογραφή στην εξογραφή εξογραφή και θα δείτε $50 από ένα χρόνο της Graphic Stock που είναι ένα πολύ καλό χρόνο γιατί they normally have $99 dollar subscription for a year αλλά με αυτό το χρόνο πρακτικά θα πείτε πόνο. Λοιπόν, ένα reason that I love digital images is that you can flip them. Είναι πολύ εύκολο να φλείτε και μπορείτε να κλείτε πολλές πόνος. Λοιπόν, πρώτα από όλοι, θα πάρω στο σχέδιο σχέδιο και θα κλείτε για σαντακλάου σχέδια. Όταν θα κλείτε, θα δείτε πόσο πολλές σχέδια που έχω φύγει και τι έχω πριν για το Graphic Stock δεν είναι μόνο ότι όλες οι σχέδια είναι ρογελτιφροί αλλά θα δείτε επίσης ανάγκη για ένα χρόνο πραγματικό όχι άλλες εξογραφές θα χρησιμοποιούνται από το σχέδιο σχέδιο. Λοιπόν, μπορείτε να δείτε ποιοί οι παίκες που έχω φύγει με πολλές των εξογραφών. Λοιπόν, θα πάρω στο σχέδιο και θα κλείτε για σαντακλάου σχέδια αλλά σχέδια που είναι ρογελτιφροί. Τα ρογελτιφροί έχουν ένα πολύ σπέσια εξογραφή που θα δείτε εγώ. Λοιπόν, θα κλείτε για σαντακλάου σχέδια που μπορώ να χρησιμοποιώ σε όλη την σχέδια μου. Τώρα, σε κάθε σχέδια πρέπει να χρειάσεις δύο φασίες της σχέδια και τα σχέδια έχουν να είναι σχέδια με ρογελτιφροί για να μπορείτε να δείτε ποιοί τους σχέδια. Λοιπόν, τώρα, θα χρησιμοποιώ να χρησιμοποιώ το πρώτο σχέδιο εδώ. Θα κλείτε για αυτό και θα το ευλογηθεί. Φυγείτε, θα δείτε τρεις διαφορετικές φορματές. Θα δείτε για το πNG-1 και θα δείτε με το φωτοσόπι μου. Τώρα, αυτό δεν είναι ένα φωτοσόπισό, αλλά θα σας δείτε πόσο εύκολο είναι να φύγει την εξογραφή. Βλέπω ότι έχω τη σάντα μου εδώ και έχω φυσικάσει ένα ήρθιο. Έχω δύο σάντας. Θα κλείτε το δύο. Φυγείτε, δείτε κλείτε στον πρώτο σχέδιο και φύγει απ' την ορισσόντα. Θα έγινε με δύο μηρές τα εξογραφή που μπορώ να φύγω και να φυγείτε την εξογραφή μου. Λοιπόν, δούμε πώς έκανε αυτή. Τώρα έχω χρησιμοποιώ τη εξογραφή μου και έχω δύο μηρές τα εξογραφή μου στον πρώτο σχέδιο. Και θα χρησιμοποιώ τα εξογραφή μου για να κλείτε τα εξογραφή μου. Τώρα, αν έχετε ένα σχέδιο σχέδιο ή κάτι τελευταίο σχέδιο, αυτή η εξογραφή θα είναι πιο εύκολη. Τώρα, θέλω να εξογραφήσω τα σάντα μου λίγο και αυτό είναι why I'm going to add some sparkle on his beard, his moustache and all the white parts on his costume. So I'm using my VersaMark pen. This works as a VersaMark ink. I am a painter as a VersaMark ink. I am applying ink on all the parts that I want to and then I'm going to apply my embossing powder. This is an embossing powder by Nouveau and it has glitter inside. So once I melt everything you will see that it's going to be super shiny and I'm going to repeat the same process for the other santa. I'm using my heat gun to melt the embossing powder and I hope that I can catch the light for you so you can see how sparkly my santa is now. In any case you can see a close-up photo later on at the end of the video. I used my scissors to cut out my santas and now I'm using my marker to darken up his boots because I thought that they were too light. By the way I used heavy cardstock by Simon Says Stamp to print my images and I'm going to link you down below on the cardstock that I have used. Now I'm looking through my dies. I'm going to try and find the correct die that will go around my santa and then I'm going to look for a rectangle die as well. So I am using those dies which are by Tonic Studios and I'm going with one that has a scallop edge so I'm just trying to decide which one I'm going to use which is going to be big enough to cut out a circle on the inside so I decided to go with those too and I'm going to use my die cutting machine to cut out a pattern paper this is a pattern paper with a very subtle design which is on red and white I'm going to cut it out and then I'm going to place my panel on top of my card base I'm working with a standard card base that's 4.25x5.5 and I have created that out of a satin cardstock that's looking really beautiful this comes from this craft paper collection and it's by Tonic Studios that's called Scarlet Organza Satin Effect by the way this is available in the UK I'm not sure if it's already available in the US but in any case I'm going to make sure that I'll link you down below on where you can find it online so I'm going to place one on top of the other and secure them together notice that I'm not sticking one on top of the other permanently and I'm going to place my die on top and while I'm going to pass it through my satin expansion I'm going to make sure that I open up the card so I don't cut out the back of my card and now that I have all my parts ready it's time to assemble my card I'm going to take away those die cuts so I end up with those holes and this is where I'm going to place my Santa so I'm going to put some tape adhesive that's strong tape adhesive at the back of both my Santas and then I'm going to use a thread and I'm going with a golden thread here I'm going to place it where I have built the tape adhesive at the back and on the other Santa I'm going to peel off the tape from the middle and I'm also going to apply some glue all around now for my glue I'm using a glue pen by Nouveau I'm going to make sure that I have plenty all over since I don't want some of those parts to stick out and then I'm going to place one on top making sure that they align perfectly so I have the spinner part of my card ready and I think that's looking really cute so now all I have to do is to assemble the main part of my card so this is where that spinner is going to go I'm going to apply some strong tape adhesive at the top and at the bottom of where I am planning to stick the string I'm also going to apply some tape adhesive at the top panel of my card this is going to cover up all the mess so I have built off my tape adhesive I'm going to place the Santa exactly where I want I'm trying to place him as centered as I can I'm going to use my scissors to cut out the excess thread and then I'm going to make sure that I align both those holes perfectly now to finish off my card I have die cut the word greetings and I have also die cut this ring by using my circle dies I am adding some glue at the back with my glue pen and this is going to finish off that hole there and I'm also going to add some glue at the back of the word greetings and stick it at the very bottom of my card and of course I will not forget to add the dot from the letter I and this is how the card is looking at the moment and just because I cannot finish with little details I decided to add some glossy accents on his eyes and then I'm going to stick on top those googly eyes that I have they are really tiny and they fit him perfectly I think the card is hilarious and as the Santa is spinning a googly and go up and down it's so funny I think this is a perfect card for a little boy or girl so I'm going to demonstrate how it works you just spin all the way and then you can put it on the envelope and when the recipient gets the card he can see Santa spinning and I would go ahead and write my sentiment at the very bottom on the inside of the card so this way when you have the card closed you cannot see what it says on the inside So now let's move on to the second card where I took advantage of the possibility to resize your digital images and I have used one of the images that I have found in Graphics Talk and I have resized it so that it takes up most of the space on my card base and I am going to link you down below on all the images that I have used for all those three cards but you can find the exact same ones So as you can see I am using this hilarious image of Santa skiing and as his skis he actually has a candy cane I think that's a really adorable image and I decided to make it quite big I am using my scissors to cut it out and as I am cutting it out I am making sure that I leave a white border all around This is going to be a very simple design and I am going to emboss using this very old folder I am not sure if it's still available I am going to try and find it online and I am going to link you down below if that's possible but in any case it's an embossing folder by Cuttlebug that has beautiful snowflakes on top I am going to pass it through my die cutting machine and I am using Graph colored cardstock So I hope you can see the beautiful emboss there and that was a standard card that's 4.25x5.5 Now I have also used my hillside dies by Lonefone to cut out this snowbank that's just white paper and I am going to add some foam-tip at the back and stick it at the very bottom of my card and since this piece of paper is quite big I am going to use my scissors to cut out the excess but the great color combination for Christmas cards that I really love is craft with white and red I think that's a perfect combination So I am going to stick my santa down and I have used foam-tip at the back so I have a little bit of dimension there and I think that really looks as if santa is coming out of the page So I just need to add some sparkle and some glitter on many parts of this image and to finish it off I am also going to use some glossy accents on his eyes and I think this is the perfect card for everyone who loves funny cards Now for the sentiment you can just stamp it or add whatever you like on the inside of the card or you can use the empty space at the very bottom just like I am doing here Ho Ho Ho I am stamping with Tuxedo Black ink and my card is finished So now let's move on to the third card for today and I am going to show you how easy it is to create shadow boxes or cards with many layers when you are working with digital images So I am back to the website and I am looking for winter backgrounds with santa Claus and after searching you can decide which one I like best and you can see that you can pretty much get any one of those and create your own cards It's that simple I went with the santa that is making snow angels and I am going to download the PSD file which is perfect for my photoshop I like to use photoshop So here it is opened on the photoshop and if you look on the right you can see that there are tiny little images of an eye Now these are different layers of the image and as I click on them I can see all those different layers So I can turn off some of them and have only santa and print out only santa or I can have only the background and print out only the background So you can imagine all the different layers that you can get a more complicated scene that has mountains at the back and the sky or it has snow banks at the front and the santa and even a villa You can create pretty much a shadow box by just printing out all the different layers In my case I am going for a very easy demo today So I am going to cut out the background the snow background As always I am using my scissors to cut around my santa while I am cutting I am making sure that I leave a white border all around This is going to make him look more finished and as if it was a ready made cut out You can see how nicely it fits on top of my background and at the back I am going to add some foam tape and this is going to be a standard card that is 4.25x5.5 It is going to be a very simple card but you will see that I am going to add a fun element So my card base is white I am going to stick that on top It is slightly smaller than the standard card which means that it is going to leave a white border all around and now of course you can stick the santa with a foam square at the back to add some dimension or you can make it even more fun and add a wobble just like I am going to do now This is a little spring that I am going to stick at the back and it is going to help santa to move around Now just because this is slightly bigger than I want to I am going to use my scissors to cut out a little bit from the sides Of course there are smaller wobbles that I don't have at hand right now So I am just going to make sure that this is going to fit my needs That spring has adhesive on both sides So I am going to make sure that I stick it at the center back of my santa and making sure that it doesn't stick out And I am also going to peel off the other side of the wobble and stick it directly on top of my card base And now you can see santa moving as he is making the perfect snow angel I am going to leave it clean and simple as it is now and I decided not to stamp but to add any type of sentiment I am going to write down whatever I want to on the inside of the card To finish it off Again I am using some clear wing of stellar glitter pen to add a little bit of glitter on the red parts of his costume And I am also going to use some glossy accents on his belt as well as the boots And these were the cards for today I hope you had fun and got inspired And if you did don't forget to leave me a comment or a thumbs up on my youtube channel Don't forget to take advantage of the discount If you decide to subscribe for Shutterstock you will find the link down below the description area Thank you all for watching