 Everything you need to install the Helix security panel comes standard in the box. The Helipad utilizes a Bluetooth low-energy radio link to communicate with the Helix system and can typically operate from over 100 feet away from the panel. To enroll the Helipad, you first have to place the Helix into Enroll mode by holding the button near the top of the Helix system for about 3 seconds. You will know the Helix is ready to listen for new devices when the arming LED, noted, links red. You'll have about 5 seconds available to enroll devices before the Helix enrollment window ends. Simply press and hold the menu button on the Helipad until you see the Enroll question mark message, then press the check to confirm the procedure. The Helipad will negotiate a secure and encrypted link with Helix, then issue a confirmation message noting it found an appropriate system. Press the menu button twice to exit Enroll mode on the Helipad, then press the Enroll button on Helix to have it exit listen mode. The LED will turn to normal green state when this is completed successfully. To arm the Helix system to stay mode, you simply press and hold the symbol to the left of the zero key. The arming delay screen will stay illuminated until the arming session is complete and is followed by the arm stay indicator. Disarming the system is accomplished by simply entering a valid user code that's been configured into the Helix system. Arming to a way mode follows a similar procedure, but is started by pressing the away symbol to the right of the zero key. There are several other features that can be configured into the Helipad device. To view or change the settings, simply press the check key. The options menu will appear from the right of the screen. The features include from top to bottom, silent arming, instant arming, night arming, and chime mode. Chime is a global setting and any changes will be reflected on all enrolled Helipad devices. The other options are retained locally for that Helipad operation only, allowing each arming station to operate as desired based on location. You can move through the menu of options using the up and down keys as shown and toggle the settings on any feature by pressing the check key. A subsequent press of the check key will toggle it to the inverted state once again. Advanced installer features can be accessed by pressing and holding the menu key for three seconds. This option allows for changing advanced features including keypad sensitivity, changing the key press sound, or changing the enrollment status of the Helipad. Additional options may appear in future releases of the product. The battery on the Helipad will last more than one year with typical operation. Replacing the batteries is easy. Simply pull the tab at the bottom of the Helipad firmly. The cover of the keypad will be removed from the mounting plate, exposing two AAA batteries. To replace the keypad, hook towards the top of the mounting plate and press firmly until it snaps back into place. Make sure to subscribe to our YouTube page and click the Show More tab underneath the video where you can view valuable links pertaining to this product, similar how-to videos, and our low-cost, no-contract alarm monitoring services.