 Hello, this is Nick from Laptop Media, and today we will show you how to open the HP Pavilion 15, 15EG3000. To open this machine, you have to undo six Phillips-head screws. The pair on the bottom is visible while the other four are hidden beneath the two long rubber feet. You have to unglu them to gain access to the screws. The next step is to raise the bottom plate close to one of the top corners to create a gap between the base and the panel. Then, pry the plate with a thin plastic tool. Please remember, it would be of great help to us if you just hit the like button and subscribe to our channel. That would motivate us to make even more and better videos for you. This device has a 41Wh battery. Since its connector is built into the unit, you have to wear gloves before removing it to avoid short circuits. Six Phillips-head screws are fixing the unit to the chassis. After undoing them you can lift the battery away from the base. It lasts for 8 hours and 20 minutes of web browsing, or 6 hours and 15 minutes of video playback. That's a good result considering the small capacity. To achieve that, you have to apply the balanced preset in the Windows Power & Battery menu and disable the Fan Always On function in the BIOS. The two sodiums fit up to 16GB of DDR4, 3200 MHz memory in dual channel mode. Storage-wise, you can rely on a single M.2 slot compatible with Gen4 SSDs. The SSD speed is limited to Gen3 values. Beneath the pre-installed NVMe, there is a thermal pad. The cooling solution has a single fan, a long heat pipe, one extra large heat sink, and a heat spreader.