 Shaber 1000 here today. We've got this Husqvarna push mower Self-propelled The claim is I won't start So I'll tell you a little bit about it some information. I got on it. That's if we can't get it to run Hey guys, so the story on this it's not really a story. It's just some information This belongs to my niece and nephew my niece and her husband so They bought it new about three years ago and They haven't used it's been sent in for it's always started up for him everything But it's been sent in for about a year and a half. They said could be a little longer But they said about a year and a half it's been sent in and it doesn't want to start so what we're going to do is we're gonna see if we can get it running started up and We'll probably put a new plug change oil Kind of tune it up a little bit, but first let's see what she's talking about when she says it won't start all right now I don't believe There's no primer ball on this So let's give it a couple pulls Should have automatic choke. Let's give a couple pulls if it'll start. She said it wasn't run. So I don't know Okay, so Let's pull let's pull the plug wire off of it. See if it's got spark first. I've got my spark tester here We're gonna see if it's getting spark to the plug We're just going to plug this in here It's like that plug this here into there and we're going to be looking right down there for We're going to be looking for a light. It should flash it should blink. Let's see here And I can't see Because of where I'm at Of course, I don't know if this one's any good. I've got about five of them. All right. Well, there's another way I'll touch this on here and give it a pull and see if I get zapped. Wait a minute I got this All right, I gotta Gotta pull this handle which also kills the motor. So let's check it now No not seeing anything Okay, I felt spark so Just see if I see it down here If you look right down in there, I can't get you there we go You should see it sparking Right in here. Okay. Good now What we're gonna do is we're gonna put spark plug out and see if it's got spark Okay, let's go ahead and pull this plug out. I'm not sure how I'm gonna be able to Test this because I'm not I don't think I'll be able to see it But we know we're getting spark to this It's all electronic ignition so We don't have to worry about points Look at that And you guys see that? It's gapped or bridged. That's called bridged. It was bridged with what looked to be like water I don't know But I might be able to do this here. We'll stick this up Stick this on here and it should There we go I put it here I should be able to see if it sparks or not. I know you guys can't see that Real well, but I'll get you over here So we're gonna be looking Right here, and I'm not seeing any spark Okay, we may have a dead plug But let's just go directly on to here and hold it here Right there is where we're looking Okay, let's get spark Okay, well now what we're gonna do I won't put this plug back in We're gonna pull the air cleaner off see what's going on there. It could just be filled up with water. I don't know here's the air filter Oh That's not good That's bad. I don't even think I can clean that out. Usually you can soak them in gas and wring them out let them dry But I think that's bad There's some Dirt down in here, so it could be a carburetor issue Let's go ahead Without that on there. Let's give it a pull and see if it'll start Sometimes what it does is just choke it out too much and it floods out Which it looked like it was wet Look like water to me, but it might have been fuel So let's go ahead and give this a couple pulls and see what happens I know you're not supposed to but I'm gonna shoot a little starting fluid in there And let's see if we can get it to kick over now. What I'll usually do is I Got pre-mix in there. I got a little bottle with With a little tube on it and usually I'll squirt that in the carburetor But I can't on this one Cuz it's got a it's got a screen in it, so I know you're not supposed to use this stuff But I have many times it's never heard anything yet So Let's see if that does anything force as you probably heard it fired so I think Could be Water in a gas dirty carburetor So I know it's got stuff in the tank So I don't know how much of it's water So what I'm gonna do So I'm gonna pull the line off of it and Drain what's in here out and put fresh gas in see what happens. Okay guys. So what I did I didn't pull that line off I just dumped it out of here. I just flipped it up on its side I Gas smells funky. So let's put some fresh gas in it. Okay Now Let's see what happens now Come on, baby. Not only does it put a break up against the flywheel to help slow it down It also has a kill switch in there which I forgot about because I was checking it for spark with that not up. So it seems to be running good I'm gonna try to clean this filter. I Don't know how well it's gonna be but I'm gonna try to clean it out. Let it dry Then I'm gonna blow all this stuff out of there for We'll see if it's gonna be okay. I checked the oil in this thing and it's I Mean, it's clean. It's very clean. It looks like I just put it in there. So I'm not gonna change oil on it And I think the plug is gonna be all right so I'm just gonna blow it out. I think the main cause was that filter and it had some bad gas in it, so Let me get this filter clean And I'll get this blown off and then we'll see if it starts again It's turned out pretty good We'll go ahead and put it back in Got the air compressor running behind me Well, it's in the garage, but it's behind me at this cleaned out Stuff out there. So don't suck it back. Okay. I'm gonna keep blowing this off And we'll see if it'll start again. Okay, so I got it all cleaned off. I'll show you just wiped it down blew it off Looks pretty good as it should for only being three years old So let's go ahead And see if this thing start up This should and we'll go from there. So this thing It's hooked in up here but uh It was this off of there because when he brought it out to me He folded the handles up. So It goes on right over there There it is. All right, let's uh See what happened. Sounds good Um The blade don't look the greatest. I was gonna sharpen it, but it's not really worth it I will suggest to him put a new blade on it. I think that's all it needs this summer. So it's ready to rock and roll and As far as it not starting, I think it looked like it was watering that plug. So I think it just had water in the gas No big deal Just drained it out Put fresh gas in it Cranked a few times and started ran. So There guys go. Just getting ready for my niece and nephew for Uh summertime so I want to say thanks for watching guys. Appreciate them out of breath right now Whoo Thanks for watching. Appreciate it. Shea bear the myth man of legend. I'm gone for now. There's something all over the lens of my camera I'm so sorry and uh We'll see y'all next one. Don't forget check out mugging 1000. Did I just say that? I don't know You'll have a great weekend that's coming up tomorrow's friday. We'll see you soon. Bye. Bye guys and take care