 Hello, this is Nick from Laptop Media, and today we will show you how to open the MSI Creator Z16HX Studio A13V. To open this notebook, you need to undo six Phillips head screws, then lift the back panel in one of the zones around the hinges to create a slight gap between the body and the metal piece. After that, you can pop the plate with a thin pry tool starting from the back of the laptop, and then you can work your way around on the sides and the front. Please remember, it would be of great help to us if you just hit the like button and subscribe to our channel. That would motivate us to make even more and better videos for you. The battery is a 90 watt hour model. To take it out, unplug the connector from the motherboard and undo the two Phillips head screws that are fixing the unit to the chassis. The capacity is enough for 5 hours and 53 minutes of web browsing or 7 hours and 9 minutes of video playback. There is a protective metal shroud above the RAM area. The two Sodims fit up to 64GB of DDR5, 5600MHz RAM in dual channel mode. For storage, you get just one M.2 slot. On the bright side, it's compatible with the latest and greatest Gen 5 NVMe's. There is a thick cooling pad below the pre-installed SSD. The vapor chamber cooling is big. Some of its components are visible like the two fans and the four heat sinks.