 Can't tell from underneath without having to take the wheel off. No. What's going on? It stopped making noise after whatever happened happened. No. Came apart. Nothing. But nothing came apart. Okay, YouTube. As you can tell from the beginning she thought there was something wrong with the back brakes, but it turns out it's the front I just put on here. Look at that rotor. I just put these on here about a month and a half ago. This one is clear gone and you can see Shit, sorry mosquitoes and you can see right here how bad That has worn the caliper down so we have to get a new caliper They're going to take care of the brakes because they feel the same way I do. I think The brake pad may have lost the glue on it or whatever and it dropped out Whatever the case may be any way it ended up. It lost the whole thing eventually but the rotor and Caliper there's a hundred bucks right there and I'm doing it myself. So imagine with the labor so There's what we're going to do, but we're going to do it in the morning Hey guys She bear here So we went to the parts store to get everything we needed for the truck well They didn't have the caliper which they said they had last night Went there this morning. They don't have it even though the woman last night read everything back off to me Everything was correct. She typed in the wrong damn part number under that vehicle So the other place I called last night that said yes, they have it Poor store called them They don't have it Now we're around us had it in stock. So we got to wait until five o'clock tonight To put the caliper on the truck and we got to put a rotor on it So that's gonna cost cost us pretty close to a hundred dollars for something that wasn't our fault The brake pads Were in very good condition They were all even one of them was gone, of course So what I'm guessing is the glue failed Is a factory defect the glue failed on that one and the pad came off the metal backing And then it was rubbing metal to metal and they don't take long And it ruined it. So I'm going to get a hold of weaver That's the brakes. I'm gonna get a hold of weaver and find out What the hell's going on? Why are they're selling shit like that? That's very dangerous The rotors in bad shape You'll see more of that later But so I'm just kind of vlogging until five o'clock and right now it is Almost noon So we spent 45 minutes at the part store of them trying to get us the part So we wouldn't have to wait so We're in this truck hate fords Her mom's truck so Some just kind of hanging out. We're at a patient right now patients house So we got to wait until five o'clock before we can get the rotor. I mean the the caliper I got everything else got the rotor Got the brake pads. They did give me new brake pads. They They tried to say they were bought in September. I said no They was only bought about a month and a half ago blah blah blah And he says well the only thing we're showing here September That's why I don't give a shit their lifetime warranty He said well that's under manufacturers defect and I said yeah if you ask me that's manufacturers defect right there You know well you only got three of them. I said yeah, the other one just blew away. It went away I said as you can see from these three they were wearing fine And they were they were doing great still had a lot of pad on all of them Except that one so that's what happened to that one it malfunctioned it was factor defect and it fucked up the rotor and the caliper So as soon as we get to that we'll Will commence to commencing and put the new Rotor the new caliper and the new brakes on both sides again, so I Did check the back brakes. I just them out a little bit. They look pretty good I'm gonna put them on here in the next couple weeks though So since I adjusted them they're wear down a little bit quicker. They're working fine So there's some life left in them But I'm gonna go ahead and that way she'll have all new brakes on it went ahead and ordered Stabilizer bushings, so that'll be on another well sway bar bushings That'll be on another video. They're really easy to change I'll show you how to do it because the truck needs an alignment And I know if we take it in they're not gonna line it up with with the sway bar bushings bad, so Anyway, that's what's happening for now Hey guys We're back Waiting on Monkey to go do a patient Patient that we was that last week Me and Bruno's here. Yeah, Bruno. Say hi so we're down here at the lake and I just had her drop us off here because we want to go do her patient, which is in a gated community And of course them gatekeepers think they're the fucking law They think they know everything said Bruno can be in there and well he can't he's in he's he's a service animal Well, we're we're this is a no animal Place there. Well, I don't give a shit. He's like well, we can't have the animals in public here That's the way he's not gonna be public He's gonna be in a private vehicle and he says well that don't matter. I said you cannot constitute What I have in this truck you can't tell me, you know, that's discrimination and he was like well Why don't why don't you just drop her off? Let her do her thing you you go back out and then come back and pick her up So that's a waste of our gas and shit You know people need to fucking understand and if you don't fucking believe me look up the goddamn laws I'm sick up. I'm sick of this shit, you know What are they gonna do if a cop goes in there with a canine unit? Are they gonna tell him he can't be in there? That's a service doll. So is he and that's bullshit. I'm tired of I'm tired of gatekeepers and these fucking wannabe people, you know, they can't he ain't no cop He's just a fucking guard housekeeper. That's all you know You can't tell me what I can have and can't have in this truck, you know, it's a personal truck It's a private truck So I wasn't gonna dick dick with him I so just run us down here to the boat ramp So we're down here on this big lake. I'll give you a view of it. I'll zoom in on it There's a nice Little walkway right? This is a pretty good size lake here Now I've never boated this one yet, but we will it's nice. We've got a nice breeze. We're in the shade I got Bruno over here in the shade so That way we can we still got a few hours to kill until five o'clock to do those To do the break see there's the boat slip right there So yeah, it's pretty it's pretty we're sitting under some water oaks here Got a nice breeze going We've got a duck behind us and another bird Hi guys Back at you a little bit We are at her last patience. It is 437 And we got to go get her part and we got to fix her truck and now See the windows down She had the window down about that far and she went to roll it up and It didn't want to do anything. So what she does she monkey keeps flipping that switch back and forth because they're power windows No, it wants the fucking glass falls down inside the door. So now after we fix our truck I got to pull the door panel off her mom's truck to find out why it came off track and fell down inside the door hate Fords Hey guys, here's the bad side Set rotor Ready to collapse as you can see the back side is fine outside tonight, but We're gonna change this rotor. So We have to take these bolts out. We got to take this cap off take the bearings off So the first thing we got to do is take This bracket off that holds the caliper the caliper mounting bracket It's held on by That bolt right there and that bolt right there So let's get them out. All right, we got the bracket off That's it laying there Now what we got to do There's a cotter pin in here Some guys call them cotter keys Well, it's not a key. That's not a keyway. That is a pin now usually I Will use a pair of side cuts on these And it bends them out pretty good But I forgot my side cuts so String that out and bring it back out. Well, it just slides out of there now Shit, I just took a picture so what I'm gonna do is I'm gonna put Everything inside my dust cap right there And take that off if these pliers are gonna work I think her dad's got a pair of Yeah, that worked because see he shouldn't be tight He should actually pretty much take them off with your fingers Kind of like this was I was the last one put these on about two years ago Okay, and Then right behind that give it a tug right behind that is your washer Put it down in there and then your bearing so once you tug it out like that push in a little bit and your bearing will start to come out And we can inspect our bearing Okay now if there's no issues with this I'm gonna clean it up a little bit and And I'll show you how to pack it, but let me get this off of here real quick We're not replacing this whole unit. This is the hub This is the rotor. We're only replacing this part. So we're gonna take these five Bolts out right here on One two three four five. I'm gonna take these five bolts out. There's one in between every stud and Then this this hub this will lift up off of here. Okay. Now. Let me get the socket I need and I'll show you how to do that All right guys, let me see if I can hold this And do this at the same time It'd be nice to have somebody hold the camera for me But I'm sure you get the idea. So you take them bolts out bolts out There's a first to help somebody but when I want it everybody's too busy shooting the shit All right, I'm gonna take a hammer. I'm gonna tap right there I want to tap back here because this is This is a sensor for the analog brakes and I'll show you how to pack that bearing Hi guys, if you can tell by the shade, but I'll move to the other side of the truck So we can do this in the shade. So hopefully you can see it. All right. Now what I've got here I like the red multi-purpose high-temperature grease, but it couldn't find it But I do have the high temp disc brake wheel bearing grease. So As long as you got something high temp because these do get warm. What you're gonna want to do This is the old-fashioned way. That's why I'm showing you this put this in your hand like this. All right See just like that and take your bearing see the wide side See how wide that is right there and how skinny that is. So take your wide side and start pushing that in There like that into that grease Okay, and you keep doing that until you see it come out This end so I'll just show you just here real quick and you'll see it start coming out there comes See how it's coming out right there Now you're gonna want to do that all the way around it And that's a good pack and then We'll all put the uh It just gets bolted right back on and it goes on just backwards from what you took it off from Bearing because in order to do that I'd have to put a seal in it And I forgot to get a seal but it looks fine So I'm gonna make sure I've got plenty of grease in the cavity now what I'm gonna do is I'm gonna go ahead and pack This and then I'll show you how to preload that bearing or preload your rotor how you know when it's tight enough, okay? so I'm gonna finish this up and Then we'll go back to the other side, and I'll show you all that other stuff All right guys, I'm gonna try to show you this without getting in your way too much Get you zoomed in see that's loose right see that now. I'm gonna do I'm gonna turn this in As tight as I can get it with my fingers Okay, you can do this with a pair pair of channel locks or whatever But you don't have to wrench on it very hard now Go a quarter turn About and see what it feels like if it'll go a quarter turn take it another quarter turn See what it feels like. That's how you preload your bearings Because you don't want them super-duper done a whopping tight because they'll wear out very fat Okay, now all you got left to do this. I wanted to show you this too. This is um Where you at? Keep forgetting I got you so far away. I got you zoomed in This is this is uh something like a castle nut. Okay, see these shit You want to make sure this is clean? Okay now Remember that pin came out the side. Okay, so you want to make sure one of these damn it So the pin can go See what I mean through that So look at it as close as you can and try to get that lined up with that hole so your pin can go through so let's grab our pin and Check and see if it'll go all the way through and it's hitting the other side. So turn that one notch check it and sometimes if You can't get it to go through Nine times out of ten, but sometimes if you can't take your Take your nut and give it a little turn either way one way or the other just a smidgen always go If I have to do that always go a little tighter than looser so and take your pin and Bring it around and Make sure that you get that tap back there really well Because if you don't that pin will rub on the inside of your cap because the cap turns and that doesn't And it'll actually cut your cap off and you'll lose all your grease. So let's clean This grease out of here If we was at my garage, I'd be able to spend the day cleaning this up and stuff, but we're at her mom's and It's getting late. I still got to fix her mom's window. So just kind of do that and Tap it back on If you don't want to go be careful tapping on that you don't want to bend it but it should pop on there if you have to take Take something and go right around that ridge and there you go. Make sure it's all Good to go now. I'm going to clean this rotor up and I'm going to put the caliper bracket back on And I'm going to put the caliper back on It's just two bolts and then I'll show you how to bleed this thing. I'm going to try to gravity bleed it first Okay Now this should be the only one I'm going to have to bleed because I didn't have the other side off This has got Analog brake system and it's also got what is called a proportioning valve Okay, so that way it gives gives fluid equal pressure to all the brakes every time So this is the only one that's going to have air in it. The other ones should not have air in it, okay? So about 80% of the time If you like if your brake line broke on this side and you're replacing it You should only have to bleed this one wheel That's 80% of the time sometimes, you know, things differ there it will get air in it But hopefully we'll get lucky and when we have to bleed this one. Alright guys We're getting ready to bleed these Like I said, this has on the front. This has analog brakes So you only have to push it down one time You don't have to pump it now you may have to push it down one time several times But you don't have to pump it three or four times and then hold it just going to be once So let me see if I can get you back here now I've got the I've got the bleeder loose And then I'm going to have her in just a second push down on the pedal just till it stops and I'll ever hold it You ready? Okay, push the pedal down just till it stops and then hold it smart again flew it out. Let me tighten that Okay, let off. I'll do it again. Don't go real fast Okay, do it again. You down. Yeah, we got to tell me. Okay. Do it again. Okay. I'm getting Stuffed down here. So It's still got a little air in it. So we're going to keep doing that Until it's just nothing but fluid All right guys, she's back on all bled out This one was pretty easy. It didn't gravity bleed But about four times and we had all the air out of it I went ahead and checked the other side and it was fine. I Cracked the bleeder and there was no air in it. So I didn't mess with it anymore She's getting ready to take for a drive and She won't go get me a coke. So you're on YouTube mama Okay guys It's about three minutes till 10 So But we made it home In our truck right in our truck Yeah, oh my god And I fixed her mom's window I didn't actually fix it fix it, but I got it where it's supposed to be. Yeah There's a track on the bottom of the windows it slid forward. So if you roll it more than halfway down Either that or someone's put the wrong window in it at one time. So when you roll a halfway down it comes out of the track and Drops the window down. So I got that done got the truck down Had a great day Lots of two days, but fun, huh? Yeah, cuz last night the back brakes are bad back brakes are bad You've seen that they weren't bad No, that was the front line. I mean they could be changed, but this thing go a couple more weeks So anyway, that's front done Yeah, oh it was a pain in the ass to get that part. Oh my god, I think I told you guys man Jesus they lied a lot twice. Yeah, I'm not about the price. It's $20 more and what they quoted me last night in both places Okay, and then they lied and said they had it and I told you earlier remember that Nobody had it. Yeah, you have to order it and this poor guy up here He was doing the best he could to locate us one that we could get now Just no luck nobody had it To wait until five o'clock and they were supposed to call us they never called us so we went down there It came in at three Then when I went in to get it, well, I don't think it's here yet. I said fucking better be it's after five Is it? Well, I don't think it's here. I said fucking better be any other guy said. Oh, well, it's been here since three It's back here. I said nobody called me Well, like I said, I didn't know it was here Aren't you supposed to check that shit? Well, that's the side point. No, it ain't that is the point dumb ass. God fucking hate. Oh, you do that. Well Do that again. I don't know what I did You know, so that's my vlog. What a wonderful vlog, but tomorrow's good Friday and we want to tell everybody To have a safe weekend and happy Easter. Yeah, I hope the Easter bunny comes to you Wait, is that it's like this? Hey, yeah, whatever you do that. Well, stop saying that. God. I get so So I had to go to work with her all fucking day All day have a good time. Where did you end up? And then I couldn't I couldn't I couldn't Then she breaks the day in one dough So I You know, so I'm sitting there sweat my ass off because there's really no sense of wasting gas and have the air on When one windows clear down, so, you know, I had to sit there and sweat my ass off finally I got tired of doing that. So I started the truck up turn the air on while arrows are on so I started the truck up 10 seconds later here. She comes That one's done Oh But we got our truck fixed for rolling again, my man fix my truck Rakes are very good Yeah, I could have been bad but happy Easter everyone she bear I'm gone Monkey says she's out monkey's out. All right. Thanks guys myth man the legend We got monkey Paul over here. We're gonna say good night guys. It's getting late So by the time he says so probably tomorrow, which would be good Friday So and hope you guys have a good Friday. Thanks for watching guys and remember check out monkey 1000 channel And we'll chat soon. Bye. Bye guys