 Γεια σας, είναι Wicky εδώ και σήμερα είμαι να εξεφαρήσω the November Card Kit by Simon Says TAMP. Όταν eu vedho, a kid has already sold out but I'm going to link you down below to all the products individually in case you want to find something. In the kit you will get a bottle of gold stickers as well as this ink pad. Μεταλοφλάουρα, που είναι ακριβώς ένα κλπ, θα also get a stamp set which is great for thanksgiving cards, two envelopes that are nice and shimmery and you will also get an embossing folder. You will also get 12 6x6 patent papers, they are all double sided and I really love the color combinations on them, they are really warm and perfect for this time of the year. Now you also get 4 different colors of cardstock and just because I want to create 10 cards I'm going to add one more and I decided to add a chocolate brown one so that I can cut them all in half, score them in half and then create 10 card bases. So here are all the card bases ready to go and let's start with card number one. From my first card I'm using this beautiful patent paper and I'm going to cut it out to be slightly smaller than my standard card. So when I put it on top you can see that I have a small border all around. So now I'm going to use my craft knife and with my roller I'm going to cut out some of those hexagons so I can create some holes on my patent paper and they will work as little windows later on. Now you can of course cut out the hexagons without your roller, just freehand them and you will see that I'm going to show you how to do that. Just make sure that you go very slowly so that you don't have any bad surprises. The craft knife that I am using is by Fiskars and it's really my favorite. I find it very comfortable to use and I think that I can control the blade really easy. So here is how my panel looks at the moment. I have three windows and of course you can go ahead and cut out even more if you want to. Of course you can create a shaker card out of this but you will see that I'm not going for a shaker card for now. I'm going to use my pencil and mark where those windows are going to fall and then on the inside of those I'm just going to stamp the sentiments from the stamp set that comes in the kit. There are some tiny little ones which I am going to use. Now I am going to stamp on the first one the two foreign words for thanks so I'm going for merci and gratias and I'm also going to stamp even more tiny little phrases from the stamp set as I go along. Now you will see that some of those are not as tiny as I want to so they don't fit as they are. So I'm going to use my scissors and cut them in half so that I can stamp each word separately. I am stamping everything with my VersaMarking and then I'm going to apply my white embossing powder. Hit set it making sure that all the powder is melted and Ginger just wants to say hi. So now I'm also going to use my eraser once everything has cooled down and make sure that you cannot see the pencil lines anymore. I am using some foam tape at the back and again this foam tape is by Scotch and it's not too bulky however it adds just a little bit of dimension so that you can see that the sentiments look as if they are at the back. Now I'm also going to punch out a couple of hearts which I'm going to stick with some foam tape on some of those hexagons and to finish it off I'm going to use some clear Wink of Stella glitter pen on my hearts. So now let's move on to the second card. Now for the second card I'm using this wood grain pattern paper and I really love pattern papers with wood grain. I think that they give such warmth and beauty on my cards. So anyway I'm going to work on the white card base so I'm going to use some tape adhesive at the back and just stick it on top. As you notice the panel is slightly smaller than the standard card and I really didn't measure anything at the bottom since I'm planning to cover it up and I'm going to create a little scene. So this is actually the other half of the wood grain pattern paper that I have cut out and I am going to cut it out with my scissors and create a nice ground for my little scene. I'm going to stick it at the bottom of my card and now from this pattern paper with all those trees I'm going to cut out some of those and create my own little embellishments. So as I'm going to cut them out I'm going to make sure that I leave a white border all around and if you are not confident with your cutting skills then make sure that you draw first a pencil line and then follow it with your scissors. I have also cut out a second hill out of the same pattern paper so that I can create some dimension and now I can decide where I want my trees to be. Once I'm happy with the placement I am using my glue pen to stick some of the trees directly on my pattern paper and I am going to use some foam scissors from some of the trees that are at the front so this way I can create some dimension on my little scene. I am going to use a sentiment that says so much to be thankful for and I am going to stamp it with VersaMarking and then white emboss it. And this is going to finish the second card for today. For this card I am using the pattern paper with all those adorable cameras that I have cut out to be exactly the size of a standard card and I am using some tape adhesive at the back and I am going to stick it and cover up the card front of my card. So now I am working on the red pattern paper and I am going to stamp the sentiment that says with all my heart. Again I am using my VersaMarking and I am going to white emboss the sentiment. I am using my heat gun to melt everything and then I am going to try and find a heart die that fits nice this sentiment. So this is a set of hearts that is called traditional hearts layering basics and it's by Tonic Studios and I went with the third size. I am making sure that this is nicely secured there. I have run it through my scissor machine and now I have a nice sentiment on a heart that matches perfectly the sentiment. So I am going to stick that directly on top of my card but just to make it a little bit more interesting I decided to do a little bit of false stitching all around the heart. This is going to add that perfect touch and I think it really makes a difference. So as I am doing that just to let you know that there is a giveaway on my blog so for a chance to win this November card kit by Simon Says Stamp make sure to visit my blog and enter your details. You will find a link to my blog post down below in the description area if you are watching on YouTube. So I am using some foam tip at the back and I am going to stick it at the center of my card and to embellish it even more I am going to use my scissors and cut out that tiny little heart from the leftovers of this patterned paper and then I am going to stick it directly on top of my card just to add more interest. To finish it off I am going to use some glossy accents on some of those tiny little hearts not all of them just to add a little bit of interest on the background Now for this card I am going to use the embossing folder I am going to place the front of my card base on the inside and then run it through my scissors machine Now this is going to make sure that I emboss only the card front and the result is really beautiful it's a great design I think it's very versatile but I am going to create the exact same design for pretty much any occasion I am using the ink pad that was included in the kit and I am going very smoothly over the raised areas and as you can see the raised areas grab the ink and they create this beautiful finishing touch I think this is a very elegant card that you can use for any occasion and since I am going for a thank you card or for a thanksgiving card I am going to stamp one of the sentiments that was in the stamp set and that says there is no time more fitting to say thank you Again to match the outside with the inside I am going to stamp the sentiment with the exact same ink pad and my misty is helping me stamp the sentiment again and again just to make sure that I get a nice impression What I really love about this ink pad is that it gives a beautiful shimmer on your project To add a touch of elegance I have used this ribbon and tied a bow and now I am going to use the envelope to create a matching envelope for my card so I am going to run it through my CISIX machine and I am going to emboss only the flap so my envelope along with the card will have the same design For this card I am going to use this beautiful patterned paper I really love the colours, the designs everything in it but just because it's so busy I don't think that I really need to do a lot on my card so I am going to use this leftover from the previous card and I am going to emboss the sentiment and for the sentiment I am going with thanks for everything I am using this banner die to cut out the sentiment and this die comes from a die set by Simon S. Tamp that has many different sizes of banners I am going to link you down below and my card is pretty much finished I am going to use some tape adhesive at the back and this is why I love to create 10 cards out of my card kit because I always end up with simple and quick cards For this card again I embossed the card front and now I am working with those scrap papers these are scrap patterned papers from previous cards and I am going to stick one on top of the other I get a border on each side so that I can see a little bit of blue but you will see that I have decided to chop off most of it so I only have a hair of blue probably you cannot see it here but you will see it at the photos at the end so now I am using this die that says hello at the very bottom of this strip of paper and I am going to pop out all the cutouts and then again I am going to use the hello die and cut it out of this orange patterned paper and now this cutout fits perfectly at the bottom of my strip now what I love about using and making the most out of my card kit is that I always stretch my supplies and try to find out ways to use every little bit of scrap and this card is a great example of that I am using my scissors to cut out the excess and now I am going to apply some glue at the back of hello and then stick it directly at the bottom of this strip making sure that it fits perfectly inside the gaps now to finish off the card I am going to use some glossy accents and I am going over the die cut that says hello but of course you can go ahead and add even more details on your card and I am going to add some clear Wink of Stella glitter pen on all of those hearts just because I can and this is going to finish off the card and now let's make the shaker card for today I always make one of the ten cards into a shaker card so I am creating now the frame I have used two rectangle dies to create this frame I have used some tape adhesive at the back I have sticked down the acetate and my card base is going to be the red cardstock so first of all I am going to stamp the sentiment and for the sentiment I am going with one that I used previously that says there is no time more fitting to say thank you and I am going to stamp it at the center of my card base by using VersaMarketing and then white emboss it to do so I am using my mist it just to make sure that I have stamped the sentiment nicely when you are using big stamps it is always nice to stamp twice and probably you cannot see it but I can see that I haven't placed correctly at the center of the sentiment so now I am happy with the stamping and then I will go ahead and apply the white embossing powder so now I am going to use my foam tape and go all around the back of the frame you can double up if you want to this is going to give even more freedom to the little sequence that you add inside for movement and this is what I am going to do actually for this card I don't know unless double up but just because I am using these sequence and they have big leaves inside I want to make sure that they move nicely on my window so now I am going to peel off the backing from my foam tape and now make sure that I place the frame correctly on top of my card base and just to finish off the card and add a little bit of interest I am going to add a few sequence from this mix at the outside of my card and to stick them down I am using some glue dots now for this card I am going to use this scrap and a couple of leaves these are leftovers from this die this is by Simon's stamp and I had those two leaves from a previous project so I am going to stamp the sentiment at the center of this red cardstock and I am going with a tiny one that says this is a thank you card and I am going to stamp it vertically instead of horizontally as you would expect because this is going to be the stamp for the little flower that I am going to create so again I am stamping with VersaMarking I am going to apply my embossing powder heat set it and my stamp is ready so now I am going to punch out a little circle and this is again from a pattern paper that was included in the kit I am trying to make sure that where I want to stick this down I am using some glue at the back again trying to decide the best placement and now I can stick the leaves on each side of my stamp to do so I am going to use some tape adhesive at the back and to stick down the flower I am going to use some glue dots the good thing about those glue dots is that they are not as permanent as you think so the recipient will be able to just grab the paper clip if she wants to and now I am going to stick this with another panel that I have left over from a previous card and as you can see I am going to use the green card base which I have again embossed with the embossing powder I am using some tape adhesive at the back of my panel and then I am going to stick that directly at the center of my card so now I have only few leftovers and I am going to create a card with all the scraps that I have and a great way to stamp your scraps is to create banners so I have used the die set by Simon's stamp with all the different sizes of banners I have die cut out of my scraps those 3 different panels and I am going to stamp the word thanks on one of them and then I am going to stack them one on top of the other for my card base I am using the blue card base and I am going to cover it up with this beautiful pattern paper with all those hearts and jars again I have cut it out to be slightly smaller than my card base so that you can see a small border all around I get a lot of questions on how long does it take me to create those 10 cards so you can probably tell that I am wearing different clothes and I also have a different nail polish and that's because this video was done in 2 different evenings although it looks smooth and quick it's not really like that anyway to add a little bit of interest and some detail I am using my signal white gel pen adding some force stitching at the top of those banners and then at the back I am going to add some foam tape and to finish it off I am going to create some enamel dots with my nouveau drops and I am going to show you how I am going to create a booboo here and how I am going to just save it with a pin a very quick and easy design and really a go-to when you want to use up all your scrap papers and now I am working directly on my card base I am going to stamp the sentiment with the ink pad that was included in the kit and I am going to stamp it from the top right corner of my card I am using again my misti just because this ink pad doesn't get a great impression at first so I am going to stamp it 2 or 3 times now the sentiment that I used says with all my heart so I have also used the tiny little sentiment that says thank you so I end up with thank you with all my heart in a beautiful shimmery look I hope you can see the shine so I am going to use this leftover pattern paper and I am going to fold it on itself so that you can see both the designs on this pattern paper with my tool I am going to poke a hole and then I am going to thread through a brad the brad that I am using is by HeroArts it is from a very old collection and it has a beautiful gem in green that matches perfectly the cardstock I am using my tape runner at the back and I am going to stick it on top of my card base so as if this pattern paper was folded so that you can see and read the sentiment I have used my stickers to add some dots around my sentiment and I have also cut out a couple of strips of paper this is the exact same pattern paper as the one that you see on my card front and I am going to embellish this a little bit more so now let's take a quick look all the 10 cards together that I have created using the Seimus S-Tamp November card kit and these were the cards for today I hope you had fun and got inspired and if you did, don't forget to leave me a comment as well as give me thumbs up on my youtube channel