 Γεια σας και ευχαριστούμε! Σήμερα θα φτιάξω την Γένωρη Κάρτκη by Simon's Stump και πρώτα θα δούμε ένα κομμάτι για ό,τι συμβαίνει. Φυσικά, βλέπουμε δύο κομμάτια από πόν-πον, σε διάφορες σχολές και κομμάτια. Θα also βλέπουμε το διστρέσο-οξο-καστό μπλέντ. Αυτό είναι πράγμα, το οποίο είναι καλύτερο. Δεν υπάρχει καλύτερη κομμάτια και πρέπει να είναι χρησιμοποιημένη as a pallet. Μπορείτε να χρησιμοποιηθείτε τα κομμάτια για να φτιάξετε την very own color ή να φτιάξετε ένα νόμπρο λόγο. Στο κομμάτι θα also φτιάξετε τρεις μπλέντ, κομμάτια και also an envelope. Θα also φτιάξετε το διστρέσο-οξο-κομμάτια. Αυτό είναι called Twirling Ice Skater και είναι απλά αδόραμμα. Θα θα δημιουργήσω την πρώτη κομμάτια χρησιμοποιημένης διστρέσο-οξο-οξο-κομμάτια. Θα δώσει όνειeye길 να χρησιμοποιήσετε τα κομμάτια known fieldsee .Σε εκείνη στην στιγμή να όσ estructωachi ενώ θα φτιάξετε τα νόμοι understanding ενώ θα λέσulturε besteδοξεία ή και στον κομμάτι lacked name και πρέπει να βά Regardετε ash sanctions με το τρίτο Wow Un temu day ή η νε ende εγγλιά φτιάξα Είναι μία ευκαιρία παρουσία και θα χρησιμοποιήσω αυτά πολύ για τα ταλιά μου σήμερα. Και τελειώτας, βλέπεις αυτό το στάντσο στάντσο. Αυτό είναι καλύτερο για το αυτοίς, πολλές φορές, πολλές φορές στάντσες, όπως σπέγγουινς, σνόμεν και στάντσο. Και θα πάρεις 3 κολλές ταλίδες για ταλίδες σου. Τώρα, τελειώτας, έχω έναν διαφορετικό προσθέσμα για να χρησιμοποιήσω ταλίδες που βλέπουν σε αυτά ταλίδες. Λοιπόν,切ω έναν 4 κόλλο,όπλα 4 x 5.5 κολλές. Και τελειώτας πέτρες να χρησιμοποιήσω ταλίδες μου στάντσο. Τότε, χρησιμοποιήσω ταλίδες που βλέπουν σε αυτοίες κολλές που έχω στο σημερα. Τώρα, το πό bins είναι πιο μεγάλο, για να cram τον ευκαιρικό μου στάντσο. Υπάρχει μία αντισπμή στο πόμμα καιexplore στις τέτοιες λόγες για ημέρα. Λοιπόν, αυτό είναι μία δρόμξη. Τώρα, ξεκινούμε στο πρώτο διευλάδι. για αυτό χρησιμοποιήσω κάποια βασκότητα να χρησιμοποιήσω το μικρό κομμάτι και τώρα θα δοκιμαστεί να βρεις ένα κομμάτι που βοηθεί αυτή η βασκότητα να δημιουργήσει οπότε θα πηγαίνω για ένα κομμάτι δύσκολο και νομίζω ότι αυτή λόγει καλύτερα So now I'm going for a spinner card and I have cut out the girl one more time as you can see so that I can sandwich this piece of thread on the inside I'm just going to stick it there temporarily with this tape adhesive I know that the string is going to stay in place and then I can add even more white glue to put those two pieces together now down below you will find a link to this card kit which is still available by the way but you will also find links to the products that I'm using individually so if you want to grab only the stamp set which is absolutely great or this cute little die you can do so if you wish Now I'm going to stick those two cutouts together making sure that the glitter side is on the outside and now you can see I have my spinner element ready to go on my card now for the card base all I have to do is to just cut out a window at the center and I am going to do that at the same time so I'm going to cut out the main card base as well as the panel so that I can align them εσύ later on and now I have all the pieces that I need to put together my card now it's just a matter of putting everything together but before that I'm going to stamp my sentiment I will go with the one that says winter hello and I will white emboss it at the bottom of my card base now to put together one of those spinner cards it's really easy all you have to do is just secure the thread at the top and at the bottom making sure that the circle that I have cut out the window that you have for your element is big enough to allow for a nice spinning I will chop off the excess and then just place on top the pattern paper and they are going to align perfectly since I did the cutting at the same time at this stage you can call your card ready but if you are like me and you want more contrast behind your spinning element then just stick the pattern paper on the inside of your card this is where I decided to add a little ring around the window I cut it out by using two circles one inside the other and this I think makes it look more finished and that's what you do when you can you don't know when to stop with the little detail so I'm adding some gems here and there at the center of some of the snowflakes not everywhere and before you put this card inside an envelope make sure to give it a good spin so when they open the card this is what they get lots of fun I love interactive cards now for my second card I'm going to use this gorgeous pattern paper and I need to have a sentiment at the top that's why I will be using vellum this way it's going to help the sentiment to stand out against the busy background I will stamp the one that says snow match and I am going to pair it with another word from the same stamp set that says thanks I'm going to stamp it with VersaMarking on vellum I'm going to emboss it with white embossing powder now I have cut down the vellum to size and now I'm going to wrap it around my pattern paper and just secure it at the back I have some tape adhesive now I'm going to embellish my card just a little bit more so next to the sentiment I'm going to stick a little snowflake that I have cut out this die is not included in this kit but I'm cheating a little bit here so I'm going to stick the little label there that I have stamped with the word thanks to complete my sentiment and my card is ready I'll just stick a little gem at the center of my snowflake and here are some close-up photos of this card moving on I have this pattern paper which is left over from the previous card and I'm trying to pair it with something else so I have picked another gorgeous pattern paper with lots of little creatures on top and at the bottom of this panel I have stamped my sentiment that says snow much thanks I have embossed it with white embossing powder again and I'm using the thread from the kit as well as a little needle and I'm going to thread some pom-poms I'm using the blue ones and the white ones in no particular order so completely random here and then I'm just going to wrap it around this piece of paper I will make sure that I have three pom-poms on every row and of course you can use scotch tape to secure the the the ends of the thread at the back I'm using here double sided tape since that's what I have on my table I'm just going to chop off the excess thread and my little barely cement is ready I'm just going to stick this down with some foam tape and here is a look to the finished card moving on to the next card and I'm going to do some stamping I'm using the biggest of the penguins included in the stamp set I'm stamping it with black ink I'm also going to stamp a couple of hearts and I will color everything with my alcohol markers just some basic coloring on the cheeks the hearts as well as a little bit on his beak I'm also using my scissors to cut out the penguin I'm leaving a very thin white border all around and I'm also going to cut out the hearts and again I'm working on one of the pattern papers I'm stamping the sentiment that says I'm snowing love with you again with versa marking and white emboss it and I'm going to put everything together so I have cut out this snow slope out of white glitter paper I'm going to place it at the bottom of my panel and then stick the penguin on top with some foam squares at the back so this little guy is saying I'm snowing love with you a lovely winter card perfect for valentine's day as well I'm going to stick down the little hearts that I have cut out and now some finishing touches if you add a touch of white the center of the black eyes it really brings your creatures to life since I also have the glossy accents inside the kit I'm also going to add some on the hearts his eyes and the beak and my card is ready so here are some close-up photos and I will make another version of the same idea later on in this video for the next card again I'm doing some stamping this time I'm stamping the smallest of the penguins from the set I'm going to stamp him twice give him some color just a little bit on the cheeks and the beak and then use the scissors to cut him out just like I did for the previous card as I'm doing my cutting notice that I don't pay too much attention at the bottom of the penguins I'm planning to tuck them behind windows so they are not going to show I just make sure that I cut out only the top part of the penguin nice and tidy now I'm going through my dies and try to decide which type of windows I want to create on my pattern paper and I will go with the squares just because I have the plaid design on this pattern paper so I'm going to cut out three windows with bigger and smaller squares one of them I needed to be slightly larger to fit inside my sentiment and the other two are going to be smaller so that I can pop inside those penguins now I'm going to place my panel on top of my card base and then I will place on top of that my sentiment so I know exactly where this is going to fall before I do the stamping just a little bit of measurement there mainly eyeballing so I'm going to stamp the sentiment that says there is no one like you with black ink and then on top I'm going to stick my panel with the windows and I did use some foam tape at the back so you can see that there is dimension now I'm playing around with the penguins to decide where I want them to stick out so some of them are going to be upside down just for the fun of it and the other one is going to come in from the side of course again you can add some glossy accents on different elements of the penguins just to make them look more shiny I decided to leave it as it is and I think it is a great card to hand out to a man as well as a human so here I'm going to continue the same idea as card number four I have stamped those penguins twice and I'm going to tear one of them into a girl by giving her some eyelashes and she also has red cheeks pink cheeks while the other penguin doesn't so one of them is a boy the other one is a girl and I'm going to create a little love valentine's day card so I have created a snow bug on top of it I stamped my sentiment with red ink that says I'm snow in love with you and then I'm going to place that on top of my pattern paper I'm going to stick down a couple of those slopes and then on top I'm going to stick my penguins to create my little scene add the heart on the guy as well as a little red ribbon on the girl and never forget to add a dot of white inside the black eyes they really make a difference and really bring your characters to life from my next card I decided to work on this circle cut out that I had as a leftover from the first card so I stamped one of the snow snowmen from the stamp set I'm also going to stamp the sentiment that says thanks for my gift and I'm going to color him with mainly blues and reds since I will be using a pattern paper with these colors so everything is pretty much matching now uh just to make him more interesting and not just have a circle at the center of my card I am going to cut out with my scissors one side of the snowman and I'm cutting everything right where the black line is I'm not leaving any white border at all so I'm putting everything together here I'm going to stick this piece of pattern paper on top of another strip that I have cut out just to have that red line on the very edge of my paper and then on top I'm going to stick my little snowman and here are some close-up photos on this card as well now you probably know that I love shaker cards and in my one kit 10 cards videos I usually end up with one shaker card so this is the one for today I have used this beautiful pattern paper with the penguins and the snowmen I just cut out a window at the center I temporarily placed it on top of my card base to stamp the sentiment inside and I'm going to complete the sentiment with the word thanks so the whole sentiment says thanks snowmatch I am going to take off the panel now and I will add some acetate at the back of this window as well as all that foam tape and now on the inside I'm going to add my sequin mix I will remove all the backing from my foam tape and then stick on top of my panel and here is my shaker card quick and simple to make but so much fun to receive now here is another leftover that I have from a previous card so I will work on the white panel stamp the sentiment that says snowmatch thanks and I will create a little embellishment with the string and my pom poms so I thread it to both ends one white and white blue I'm going to make sure that they are all the way to the edges of this thread and also make sure that you tie a knot so that they don't slide all the way out of the thread now I'm going to wrap them around and secure them in place this way I end up with a lovely embellishment with dangling pom poms on top of my card I used foam tape at the back and I'm going to stick that on top of my card base and you can call your card done or if you are like me and you don't know when to stop you can create a little snowflake with your dies just cut it out and stick it at the top just wear those two threads meet and now let's move on to the last card for today you do end up having lots and lots of those cutouts with those labels and the sentiments that you can use to create even more cards and I'm going to show you now just one idea of what you can do with those so here I'm sticking one leftover patent paper on top of another the blue the dark solid blue and on top I'm going to use one of those labels from the patent paper I just cut it out by using a circle tie now just to embellish my card a little bit more I'm just going to stamp snowflakes from the stamp set they come in various sizes and I'm going to stamp them all around switching from bigger to smaller now of course you can prepare your background panel before you stick everything on top but that was like a last minute thought so I had to do whatever I could at this stage this is a very quick and simple card of course you can white embossed the snowflakes beforehand if you want I went with just stamping with color box pigment ink that looks awesome and it's really fast and now just like always let's take a quick look on all the 10 cards that I created for today using products from the January card kit by Simon Says Stamp for a chance to win this card kit make sure to head over to my blog there is a giveaway there where you just need to leave me a comment now this kit is great for your stash so I still have lots and lots of bonbons I do have the die and the big stamp set for my stash and I do have the thread the ink pad that I haven't used at all as well as the glossy accents of course the tags and the envelope and I still have some leftovers from the pattern papers to create even more cards so these were the cards for today I hope you had fun and you caught inspired don't forget to leave me a comment down below and let me know which one of those 10 cards was your favorite I always love reading those answers and make sure to join the giveaway on my blog thank you all so much for visiting today and I will be back tomorrow with a fun blog hope you have a lovely day