 Ευχαριστώ και καλώς ήρθατε back. Σήμερα έχω ένα βίντεο εργασία, εγώ θα σας δείξω το Tonex Studio's Team Holes Comfort Trimmer. Θα σας δείξω τι μπορείς να κάνεις και τι μπορείς να μπορείς να κάνεις. Επίσης, αυτό δεν was provided by the company. Αυτό δεν είναι ένα σπόν σορδικό βίντεο. Θα σας δείξω αυτή την εργασία γιατί έχω so many questions about it και ελπίζω να σας δείξω αν αυτό είναι ένα βίντεο εργασία για εγώ. Έτσι, αυτό είναι ένα πολύ κομπακτικό γυλωτίν. Μασικά, είναι πολύ σμόλωση. Έχει ένα ωραίο γυλωτίν, και είναι πολύ βασικό. Μπορείς να δείξεις ότι το γυλωτίν βάζει πίστευσης και έχει ένα ωραίο γυλωτίν μέσα και είναι πολύ εύκολη να δείξεις και να κλώσει. Δεν έχεις να παράξει πολλά πρόστημα. Το βίντεο είναι μπροσχέδιο και υπάρχει αυτό το πλαςτικό μηχέδρο που θα χρειαστείς για να κομμάσεις όταν εγώ χρειαστείς το κένι, για να βρεις πρόσφυγες σας και την ίδια φορία θα μεταξύγει το κέντρο για να δεν βρει. Στην κομμάτι έχει 4 φορές λεπτές, δηλαδή μεταξύγει πραγματικά στον κόμμα της εξέγρασης και δεν θα μεταξύγει όταν κομμάτις your κόμμα. Επίσης, επειδή χρησιμοποιώ αυτό το κλασματι στο κόμμα, αυτό είναι πολύ σημαντικό για εμένα. Εντάξει, θα σας πω λίγο για τα μεσομινότητα. Υπάρχουν μεσομινότητα στο κόμμα και στο κόμμα. Είναι δύσκολο στον κόμμα και σαντιμετρα. Είναι καλύτερο για όλα τα κόμματα. Μπορείς να δείξεις το κόμμα πάνω στο κόμμα ή στο κόμμα. Δηλαδή από ό,τι θέλεις να κάνεις. Στην κομμάτι, υπάρχουν μεσομινότητα, και όλοι είναι κραύσεις στην εξέγραση της εξέγρασης, οπότε δεν θα μεταξύγει πραγματικά. Δεν πρέπει να χρησιμοποιώ. Και σε αυτήν τα εξέγραση, υπάρχουν μεσομινότητα, που θα σας βοηθήσουν πολύ, όταν βοηθήσεις τα εξέγραση της εξέγρασης, όπως 5 x 7, 4 x 1,5 x 5, 4 x 5, και πολλές more. Και τώρα θα πω λίγο πώς γιλωτινότητα είναι και τι υπάρχουν μεσομινότητα. Είναι 6 x 8,5 εξέγρασης για το κόμμα. Και να σας πω ότι αυτό είναι αδερτωμένο, but you do get a quarter of an inch more than 8.5, so that's 6 x 8 and 3 quarters. Now I have a letter-sized paper here that I would normally cut to create my card bases. And you will see that it's not possible for me to cut it lengthwise, which means that with this cutter it's not possible to create top folding cards. So keep that in mind that you will only be able to create side folding cards with this. But as we move on with this review I'm going to explain why I love this machine and since I got it I keep using it again and again. But remember this is not your all-in-one paper cutter. So I'm going to cut out the letter-sized cardstock to create a side folding card. I can easily find the marking there. I'm holding it with the plastic protector mainly because if you don't hold it like that it's going to slide. You will get a clean and straight cut every time, but make sure to make holding the plastic protector down a habit. Now I'm going to bring in a 12x12 pattern paper here just so you can do the comparison. It's really compact and it's definitely not for scrapbookers who do 12x12 layouts. Now of course you can use it if you are one of those scrapbookers who do project life albums because you can keep it in your space area and it's going to give you clean cuts on your photos as well. So this is great for this but keep in mind that you will not be able to cut out the larger pattern papers. Now in my opinion this is a great quilting to have on hand as your second compact paper cutter. I do have a couple that I'm going to show you and I have even more in my stash but I usually use the ones with the blade. So here is one by Tonic Studios and another one by Fiskars. They both have the same system they work with blades and since I am a heavy crafter I cut tons of paper and I find that these blades do dull a lot and I have to replace them quite often. Now they are ok if you want to cut out thin paper like pattern paper but you need to change them more regularly when you use them to cut out thicker paper. I like to use 120 lbs of cardstock for my card bases and I usually don't get a clean cut when my blade is not new. Now I have a blade here that is about a month old and I will get a clean cut here as you will see but I would normally get frayed edges as a couple of months old and it always great to use guillotines in this case when you use very thick paper but the guillotine that I already have is quite large it has a handle that exceeds the main machine and you will see a photo here so I have it stored somewhere else in my craft room and I never tend to grab it but it's definitely the big mama of paper trimmers and if you want to invest on one machine for everything I would definitely suggest this and I usually go ahead and use my blades for cutting out this paper with results that I don't really like so this is why I invested to this smaller guillotine because I think that it doesn't take a lot of space it's very lightweight and it's easy for me to use every day I find it very handy but I will keep my other paper trimmer on the desk as well but in this case I need to cut out lengthwise one of my card bases you can push your paper towards the top or the bottom and then use the handle notice that I always press the protector and I get a perfect clean cut even though my cardstock the one that I'm using at the moment is 120 which is the thickest that I use now since I have my other paper trimmers on the desk I'm going to show you a little trick on how you can extend the life of your blades even when they are not new and they give you a bit of afraid edges just use a printer paper underneath and then place your paper that you want to cut on top and again this is the heaviest paper that I have which is 120 pounds I'm going to cut it I'm going to get a perfectly clean cut and at the same time it's not going to cut out the printer paper I don't know why this works but it does however I was a little bit fed out of doing this all the time I had to change the blades all the time just because I cut out such a heavy card base and I invested to the new guillotine and it gives me perfect results every time the blade is self sharpening so I will never have to change it and as far as now I'm really happy with my investment and there is one more thing that you can do with the guillotine that is super difficult to do with the blades and that's cutting out super thin strips so I'm going to bring in this pink cardstock and this is the normal cardstock that you would get like 80 pounds or 100 pounds and you will see that I'm going to cut out a super thin strip and I get a perfect clean cut very sharp and super easy to do I don't think I can get thinner than that and since this is a review and we are making the life of this guillotine harder let's double the layers and try to cut out a thicker paper I do have to push a little bit harder but it goes through nicely so you can cut out two cardstocks if you want to and I did get a clean cut as well and now I will go ahead and try to cut out through three different layers of cardstock just to test it out and since this is a review I always like to take this to the limit so you know what you are going to buy I do have to press harder it's not easy to do it doesn't cut like but it does the job and it went through three layers of cardstock and everything is cut out clean and sharp so remember that this is not a heavy duty guillotine this is a guillotine that was made with the guard maker in mind and it would go through three layers of cardstock however I do link to a heavy duty guillotine in this video down below and I also mentioned it previously so it is going to cut like butter through pattern paper and I'm just showing you here how easy it is to cut and this is mainly why I decided to invest in this guillotine ease of use and super compact perfect for my card making needs and I'm going to try and add more than one pattern paper so I am testing three pattern papers here and I am sacrificing these beautiful pattern papers just to test it out these come from a very old paper pad that I had in my stash and now I am going with five different layers this time I just need to press a little bit harder and it's going to go through beautifully and again I get nice clean cuts so if you want to mass produce for your card making needs and cut out lots of pattern papers at once it's great to conclude I would say that this is a great compact guillotine to have as your go to everyday paper trimmer you will not have to change blades since it's self-sarpening and I believe you will find it very handy especially if you have the other big paper trimmers that take up a lot of space on top of your desk now on the other hand if you don't have a paper trimmer at all then I would suggest to invest on a bigger paper trimmer so that you can cut any size of paper and then later on you can maybe invest on a more compact and handy one that you can even take with you on crops you will find links down below to this guillotine as well as to the other paper trimmers that I went through in this video and I will link to both US and UK online shops I hope I covered up everything and I helped you decide if this compact guillotine is for you or not let me know in the comments if you have any questions on this trimmer and I would also love suggestions on other products that you like me to review thank you all so much for watching and I'll see you next time