 Hey everyone Shaber1000 here today. We've got to pull this light out of here light assembly Because I don't know if you can see that Still water in it. So them droplets But don't get that water out of there. It'll start blowing fuses bomb bulbs out So we're gonna go ahead and take care of that real quick And then we're gonna move on to something else because this won't take too long. Hey guys, so To take these out. It's real simple There's two plugs. There's one up here And there's one right down here Now what I use to take them out you can use a little screwdriver, but I got my little Knife here. There's a little notch right there and right there Just pop them out just like that Now this one is different from the other side. The other side has Phillips And this hot this side has a hex head Now I do know this has had minor damage in a crash So I'm thinking that might be what it was the other side has been replaced I'm not sure what size it is It's 5 16ths and I think it's too big. So let's try try quarter-inch I had to put a bulb in this before Okay, let me find the right size Whoo, hot one. Let me find the right size and then I'll come back with you. Okay, that didn't take long There's the next one. I checked 9 30 seconds Yours may differ, but this is a 2010 Chevy Traverse So but either way you're gonna have something similar two screws There's that now I gotta back you out a little bit here Now this comes out This just slides out this way straight back Just like that It's got I'll show you here in just a second. I don't want to dump that upside down right there It's a little rubber Dot and this thing right here Right there. I'll show you and then this just clips on This right here just clips on Just a little metal clip pull that off this will turn eighth of a turn maybe Now pulls out That one same way Okay, so this little nipple here goes in That little rubber grommet there so As you can see here. We have got water Coming out of here And when I was working at the shop in Fertland Park The owner my boss He was my only boss But the owner his headlight was half filled up with water was still working, but he was like it was real damn It was half to three-quarter filled up with water. I Said well those seals around here is what happens these seals they leak inside these seals and My guess is this one's coming Right in through here. I would say right there Because these are two pieces same way as his headlight Had a Ford big old jacked up Ford He said just draining out it'll be fine. So I drilled a hole in the bottom of it a little tiny 930 no I Forget what it was 730 seconds or something a little tiny hole. I drilled in it drained it Oh, I'll see that's still not all out of there yet And it drained it all out for him and he said He said don't fill that hole up because it'll give the water something to drain out of which is true But it was low enough where the air wouldn't get to it to blow the bulbs. So all right So I'm just going to keep doing that get all the water out of here I can and we'll set it up here on the hood or somewhere and I'm gonna let it dry out And then we're gonna move on to project to It's another easy fix or well should be this is our next project guys might remember we Had to put a cable on here and You see that Primer bulbs ripped. So I'm gonna show you how to take this out. It's real easy Real simple all I'm gonna do is take a screwdriver put in here Pry it a little bit and put in here and probably you can use two screwdrivers if you want they make tools for this But not everybody's gonna have them tools if you don't work on these every day You're not gonna have them. So I'm just gonna show you how to do this with a screwdriver And we're gonna go ahead and pull this off So we can see inside there when we're done So let me grab a screwdriver and I got to grab something else to put this back in with real easy And I'll be right back with you. Okay guys, so this is what I'm gonna do I just got a little standard screwdriver here. I'm gonna put that in there and You push There's a little tab Here, I'll show you on this new one. I've got here. It's got a little tab right there Okay, you push it in and kind of pry up a little bit whereas my UK friends says prize They prized it up and I'm not making fun of them. It's just I like to Compare different cultures and the way we speak and stuff This looks like it's gonna be That's a little bent someone tightened it way down Gonna need to clean that but I'll save you from that. So we're just gonna stick this in here and push Okay, the camera over Just gonna go in right here Push that out same way with this other side like I said you can use two Screwdrivers if you want. I'm just gonna push this in and pull it up Just like that This one went back in that's okay. There we go. Just like that. That's all there is to it I've seen guys once I get it this far grab this with a pair of pliers But if you got to put this back in for any reason You don't want to do that because you can rip it. I don't know if you can see inside there, but Definitely ripped Okay Now I see some dirt up in here. So I'm gonna get some spray and spray that out real quick now. Hopefully There's diaphragm and a gasket underneath here between the carburetor or between the carburetor and the tank Hopefully that's gonna be all right It's kind of like something like a fuel pump. It's got little valves in there also We're gonna put fresh gas in it because Well, it's just got a little bit anyway I'm sure there's some water in it cuz there's some dirt in there But I'm gonna spray that out real good and then I'll be back with you Okay, now to put this back on what I use is a 17 millimeter socket. I Seen a lot of guys on YouTube do the same thing. So I'm not the only one This is not my idea, but this is just what I've always done Put that in there like that get your tabs lined up here and just push it in And you'll fill them and hear them click There we go. There's that Make sure just confirm a Lot of guys they'll use their screwdriver and push them in like this Just be careful that you don't slide off. There it is that you don't slide off and puncture your new Your new primer bulb sometimes you can oops. Sorry. Sometimes you can just get the bulbs But in this case the guy that I'm doing this for my friend Ryan He got one that has the new clip, but I am going to save this save the retainer and Here over here what we got going on is I'm letting this soak up some fuel into there Like I said, there wasn't much in it and then I'm just going to wipe it around with this and a screwdriver inside there And I'll let it dry out for a minute There you go, and then we'll put fresh fuel in it See as you can see it's starting to siphon up out just turn it like a wick Sometimes it'll just siphon right out of there, but let's make sure you don't leave any of this behind inside there Because that'll clog up your There's actually a little filters in there. Yeah, I see it's so I'm going to get that drained out very nice I mean, it's dirty, but I do see some water in there. So let's go ahead and I'm going to go ahead and do that offscreen I'm just going to drain that out We'll put fresh fuel in it, and I'll show you how you know this thing is working the primer bulb is working All right, now we've got it looking down on the top of the carburetor and we're gonna start pushing this button here Here's the primer I Can feel it and hear it coming up through the primer bulb there goes See it shoots it right into the intake. Hey now Main question Will it start to stay running? Let's get it down off the table. Let's find out forgot to tell you I clean this out looks pretty good Almost like new but it's clean enough. All right guys, so I've already primed it so you guys seen that I don't want to prime it too much because I don't want to flood it. Let's see if it'll start Comment below right now. How many pools? Bricks of strand. I'm gonna say one because we've already primed it right on guys Let's check it out. Let me move you back. I got some High grass right in here. Let's mow a little bit of this to see what happens time to call my friend Ryan Okay, so let's go ahead and put this back gathers a couple little specs in there But those are dry out on their own I cleaned up a little bit But what I'm going to do is this thing's going to be getting you can see all the dirt and stuff that still gets up in here Because the seals here not here there's a little But that's just part of it so it's still going to get in there It finds its way in I'm going to be putting Shoes in arrow here and that D driver's side Which is technically the left side so if you ever go to part store and they want to left or right Think of it as your if you're sitting in the driver's seat The left side will be the driver's side. The right side will be the passenger side I'm going to be putting LED's in this thing. So That's why I didn't spend a lot of time cleaning this out and when I do that This is all going to get detailed. All right, which way is it turned? Just like that Monkey got me a new backpack. So stay tuned for that video now. This is going to clip on Can't remember why I may have to There it is Clips on up here had that backwards. Why didn't you guys say something? This is going to put in there like that now Sure you get that down in there. You're not pinching any wires Line up your little dial over there make sure nothing's hanging out Push it back in you'll hear it clip in and there it is now We're just gonna put our screws back in right there and That'll be Two projects started to completed Like sometimes monkeys. She'll start there for projects Sometimes not all the time and like if something happens and she don't she don't get them completed I Give her some words of wisdom and some encouragement and Like if I think you know I might have something to do later, I may only start one project But I would rather start what I tell her and it's helped her to Say that's what I taught my kids if you start one project and complete one project You Completed the whole you know what I mean you got a hundred percent completed Now if you start four projects you get one completed You only done 20 you've only got 25% completed so My dad told me that one time when I was I don't know that's probably 18 I Said seems like I can't get anything done dad. He said Quit starting so many projects and he explained it to me that way If you start four and you get one done, you know, I got 25% done if you start one project and you get that one project done, that's a hundred percent and That's really worked for me. So All right. Let me go get the keys. Let's check make sure that bulbs still working. All right guys first thing we're going to do We're gonna do headlights So I'd mark the lights on that one's on now. Let's do the turn signal and there it is I don't have to check the brake light because it's on the same circuit as the turn signals so But I will I'll press it for you guys to see Two projects two projects completed a hundred percent of my gold Guess you say don't say your goals too high, right? But So anyway, what the hell is that inside my lens? You guys see that thing crawling around in there Think it's a spider hang on guys. I got to pull this lens off of here. It's a little spider Yep, he's gone. Okay. Now I can put This back on I thought yesterday. I seen something crawl across my lens When we is in the truck on my video from yesterday we On the intro part when we was going over that bridge. I thought I I thought it was my my finger at first I got the look and I thought well, that's some kind of bug in there All right Okay, well, that's good enough to do our outro. So anyway yesterday One day monkey. I didn't have my window up. She rolled all the other windows up Mine wasn't up yet. So I said how I got put my window So she turned the key on I rolled my window up shut the door We went to house several hours later. I come out. She had left a key in with the ignition on not running Just with the ignition on Drain the battery. I was like, man, you can't can't do that You can burn stuff up that way because some things need to have Have it running to cool cool itself down like coil packs and stuff like that, right? So yesterday when we got home Same thing. I said I got a rose window up and I said don't leave the key in with the ignition on this time I won't Okay, so she turned the ignition on I rolled the window up shut the door and walked around She's shutting the she shut her door and she had kind of had her hands for us. Well, you look before she said the keys I just had them. I said they're probably an ignition turned on No, they're not I said check she opened up the door reached in and you can tell by her eyes She's like, oh, but it's not turned on. I said why ain't the key coming out? She turned up back and took it out because oh I said it wasn't ten seconds So don't do that guys Don't do that no more mark so I got to get this cleaned up my screen over here's you know sweat dirty fingers whatnot because this is a You know it's a Touch touch screen so and I got to get this lens cleaned up here So all right guys, thanks for watching appreciate it. Stay tuned. I don't know maybe tonight. We'll see I Might do I probably do my pack tonight We want to do a special overnight fishing trip this weekend, but we're not sure it's supposed to be really hot But we'll find out if we get to do that If not that'll happen at a later time and tomorrow I got another fan video. It's a ceiling fan So it should be pretty cool All right guys she better than met the man legend God for now remember we started two projects got two projects done 100% complete or you can look at it as 200% complete if you want so But I look at it this way I set goals Well, my one goal was to fix the lawnmower. I already won't film it because it's just so quick and then I thought well I Come out here with monkey and I seen that water in there. She's like, oh my god. So I'm like, okay now I have two projects. I thought okay, that'll be my goal for today Is the two projects. So I got them done Now the backpack, you know, if I get to it I get to it if I don't I don't that's not that wasn't one of my goals So I'm not real worried about that. So anyway guys, hopefully your week is going great so far Stay safe everyone. Enjoy yourselves. And we'll see you in the next one. Bye. Bye guys. Take care of yourselves