 Art projects, these are always fun to do. We have motherboards and lights and things and Steve's responsible for the shenanigans going on right here. So I like the techie look of things and I like a clean look of things but this is some weird combination in between. So we have the chaos of all these motherboards but they're organized and they have lots of lights under them. So this is actually going to be part of the display that's in front of our store and you know if you can't be a tech company without some tech on display and so to give you an idea, let me hold this up. It's heavy. It's awkward. Here we go. There's lights behind it which you can see flashing on me. So this has an offset of a few inches to go against the wall and turn on full disco mode Steve. On it. That seems to have stopped. I think you pressed the wrong button. Get the fast make the blinky fast one. There we go. So if we wanted you know full on mode we got this. These are the standard lights. I think I've talked about these before. I'll leave a link below where you can buy them on Amazon including the controller and the kit and everything we did for this. But definitely kind of fun and geeky so I'll show you the bottom real quick. That probably does all kinds of fun with the camera lens. Yeah it is because it's super shiny. There's people out front because this is facing our window now. But then when you set it down like this, once we have a mount on a wall we'll show you what it actually looks like mounted. So it's all set and installed. We got it mounted. It looks cool. It's actually tied to the same controller that controls the lights on the other side. So they all blink and sync and with the same remote, same controller, same hookup. It's all wired in the ceiling and through the walls on the wires are shown. So just one more little art customizing project. Yeah Steve likes to show off his creativity on things occasionally. I'm the master of LEDs. If you're looking for creative geek ideas, we had a couple. So if you want to do this, it's pretty straightforward. The way we put it together was actually with some, you may have seen them when I flipped it over, this piece of copper pipe we had laying around from a plumbing project and we... The whole things built on a recycled parts. The only new materials are the LEDs themselves and actually the green were left over from another project. Yeah so everything was pretty much just some recycled material which makes it kind of fun and I like the glowy light thing. So that's it. Just one of those things like if you're looking for some idea to spruce up things you want a cool motherboard light up. We got a cool motherboard light up. Thanks. Or an LED shower head.