 Welcome to the SNAP. This is the segment where we answer frequently asked questions in a very rapid fire format, so let's get right into it. Today we will be demonstrating how to heat your DynaVap vaporizer with one of the most common heating sources, a BIC lighter. While a BIC lighter may not have as much heat as a torch lighter, it is still very capable of heating your VapCap. Much like other heating sources, your method of heating is important. First, we're going to show you the correct way of heating your VapCap while using a BIC lighter. Place your DynaVap vaporizer deep in the flame. While heating, you should see little to no yellow flame. Rotate slowly. Bearing your device in the flame minimizes the amount of carbon or soot left on the cap. And it doesn't really take much longer than a torch lighter. However, you will need a wind-free environment. And now to show you the incorrect way of heating your DynaVap vaporizer with a BIC lighter. As you can see, when I heat the VapCap with the top of the flame, the cap immediately turns black. What has been your experience heating a VapCap with a BIC lighter? Let us know in the comments below and be sure to like and subscribe if you would like to see more videos like this in the future. If you like what you see, make sure that you check out the other videos on our YouTube channel.