 Hi, welcome to BCH Technologies. This is Kevin. Today, we're going to talk about how to get your printer out of recovery mode. If your printer has a black screen like this, it's really annoying. And let's say you cannot do anything. It doesn't reply to any command. And if you turn the power on and off, no matter what you do, it gets back to the recovery mode right away. What happens is you have a corrupted firmware. So for Epson, if you call Epson's support, they will ask you to go to the Epson firmware update site to download a firmware update. So basically the first thing we do is we go to Epson website and find out your printer. And then you go to support and you go to update, download the firmware. And you can find that printer here, which is USB and start, finish. And you think you're good to go. However, if you go back to the printer, your printer still looks like this. And let's turn off power off. And back on off. Okay, if the first method doesn't work, we're going to do the second method. So you can see after the installation, you'll still have this recovery mode, your power down and up. And it doesn't change anything. So the second way is, so first thing we turn the power off. With the power off, put your hand like a Texas phone. Hold on this to number one and this orange button. Hold it down. And then now turn the power back on with all four keys hold down. Okay, so now you can see it said the printer is ready for update. Now we go back and install the firmware. We go back to the printer and just leave it just leave it for like a minute or two. I'll show you. See, and it's going to have have this. That means it's done. Now you're probably you'll power it off. It does not work. And they gave like a minute to power back on. It's a good sign is when you're back power back on, you don't have this service mode. So turn it on.