 So as you can see here, I put the smart tag in the ziplock bag LED is blinking at one second interval. I would press on the bag to increase the pressure like so. So you would place the smart tag inside ziplock bag on top of the DSC25R3911B reader. You scan one and you see the UID of the tag. Go to demo smart tag. The reconfiguration, as you can see, is the LED was blinking at one second interval. So every time the second elapsed, you collect the samples of temperature, pressure, acceleration, humidity. So now go to panel number three over here and read sensor data. You can see where I was pressing the bag and you see the registration of pressure. Also when the tag was placed inside the bag and I blow the bag up with my breath, therefore it's entering a high humidity chamber. So it stays at 100% when the bag is closed up. Temperature did not change very much and neither did the acceleration.