 Today we're going to replace this piece of wood on this saw because you can see it's getting all Just that cardboard stuff So let's put a real piece of wood on here Okay guys, so that is 20 by 22. I've already got the wood mark We're going to go ahead and cut this off. Hopefully I won't get too much sawdust out all over. I've got a Plastic grocery bag on the back to catch some of the sawdust So let's go ahead and kick us on. I've got everything I believe set where it needs to be so Let's cut. Let's do it again. Take the saw off of the stand All right There's only two screws left holding it on on the back side here. I can take you around now Okay, I forgot to tape my bag on that's what happened, duh Okay so we're gonna take these two bolts these two screws out here and Let me see. Let me grab What I need to take them out with I'll be right back. We got what we need here. I'm going to Take this saw off here and we'll flip this over and then we'll We'll take this this piece of crappy wood off of here. All right, we've got a lot of Sawdust here, not sure I'm gonna clean it up Let me grab a bucket Okay, go ahead and take these screws out all the way around here. I'm gonna be putting they might be all right No, we put new screws in it. What the hell, right? Let's get the new piece of wood on it Okay, guys, what we got going on here is these screws are gonna be a little too long that's okay because we'll just cut them off and I'm gonna set this under here So they will go all the way through so I don't Put a screw in my air hose did that one not recently, but it has happened I'm just gonna eyeball this. I don't know if this was even put together right it doesn't look like It was who heads off or the cut the tips off. All right, I'm just gonna try these nippers here My grinder has mysteriously Come up missing. So we use this it's starting to start and get some thunder outside It's not raining yet. I Got a Saturn sitting out there in the driveway will not start. I ran some codes on it It's coming up the O2 sensors bad. It's another really lady Shatter neighbor right around getting no two sensor and they gave her the wrong one Would have been so much easier and I'll be doggone find out where the hell it is I'm gonna set this back up on here close it ain't gonna be perfect But I like to be close as I can get it want it to be right above the legs To hold the weight better bottom Thing to it there bottom shelf, but these screws aren't gonna work We'll have to get some different screws. Let me find some different screws, but it does have a bottom shelf But it's real flimsy. So I'm gonna make another I'm gonna make a bottom shelf for it, but probably not today So let me get some different screws Okay, I found some screws. I got three that match ones of Phillips that matches, but it's a Phillips here comes a rain it sounds like and Like I said ones of Phillips ones a number two Square and this part of it is done. I'll blow it off and press there probably hit something here, too Yeah Hitting the metal underneath. It's not a big deal. I'll just drill it out. That's what we'll do hang tight Okay, here we go. I'm sure I've got here somewhere I don't know if that did anything, but we're gonna find out if we can all Probably had to put a washer on that That's the way these were they wouldn't the ones I took out wouldn't all the way in that's probably why I gotta get something tight That's wet the washers on there. Let me see if I can find Some washers. Okay. I got a couple washers here. I got a flat washer and A lock washer. It doesn't need a lock washer, but I couldn't find I Didn't want to like washer it up a whole bunch, you know make it look Any worse than it already does and this is not a number two. It is a number three bit So go It's a little bigger. Oh, yeah, that's what I'm talking about. There we go Do the other one. I'm guessing that's the problem. They had before and it's a little thinner wood, but It's a stronger wood than that stupid cardboard sawdust stuff I'm gonna have to try to put that in at an angle because the woods already strip. There we go Come on nice and solid Like I said down at the bottom here Now it's sitting right out there. It's that little tiny piece It's real thin. I'm gonna use some more of this. I'm gonna use that one as a template And I'm gonna put it down here and you just screw it on through the bottom But I'm not gonna do that today. I just wanted to bring this bring it along with me today on this little trip I'll show you what we're doing We have got The Saturn out here the only code Well, there was two codes one was the IAT sensor and Take air temperature Which is that and I took it out and cleaned it that code cleared and stayed off the other one was the O2 sensor Number two bank number two sensor that'll take care of care of it for her, but they they gave her the wrong damn one They even called She called me and said here. It's going as a question for you. Is it before or after the catalytic converter? I said it's after it's number two That means it's after Okay, this is one we need I'll show you why we need it. That's all busted up But what it would do After you drove it somewhere, you know once it got up to operating temperature it would Be running alright. Well, there's a misfire on number two cylinder That's a that's a plug, but it wasn't bad Or we're gonna put new plugs in it too, but this is what that ends supposed to look like See that That's what it's supposed to look like This is what it looks like I'll bust it up. Also, this is what the end is supposed to look like And as you can see They gave us the wrong one so I'll have to go down when monkey gets home and get the right one I'm trying to get that done for tonight. See if that's issue But what it would do is it would be be driving along you shut it off and get it started up It would start up Run about five seconds install and the only codes I'm bringing up on that thing Was those two and one of them did it actually Cleared itself when I checked it again now. So Sometimes they normally won't cause it to shut down But I have seen them to where it actually caused the vehicle shut down But she came down here to ask me what I charge to You know fix it and we was talking about I ran the codes for and told her what the problems were and She said okay, and she was going to go Well, she was going to go home. I was going to call her once I found out what the what the prices were and Well, she started up install started up install so I took I unplugged it and I did clear codes and I took that out and It's Running now. So hopefully that'll be the issue. I'll let you know and updated that Also something else. I wanted to show you With those tents Stay tuned for a video of this Guy also gave me This needs mantles, but I've got mantles Hasn't been used that much so that's cool takes the white gas But little metal can of gas for them. So anyway guys Shea bear I meant the main on legend. I just wanted to do something real quick for you guys today and hopefully It won't rain until Sunday. So I can get that thing done for her this evening and Couple things I want to do tomorrow. So all right guys. So there it is We'll do another one when we cut that out. Like I said, I'm gonna use that for a template and And Then that way it'll be Much sturdier. I mean these things are just you know, you see how they're both together But so there it is. All right, I got to pick some tools up monkeys on their way home So I'll chat you guys later. Shea bear the main legend gone for now. Bye. Bye guys and take care