 Hey everyone, Drew with GeoArm and I am back to talk to you about the brand new Qolsys IQ4 panel and how to get it connected to Wi-Fi or change your Wi-Fi network or update it whatever you're trying to do here with Wi-Fi. So it's pretty easy to do. All you're going to be doing in this case is pulling from the drop down at the top here like so. You're going to go into settings. Once you get into settings it's going to tell you in this case I don't have it connected to the Wi-Fi but if you're trying to update the Wi-Fi or you're just trying to connect the Wi-Fi in a different manner this is the way you do it. So go ahead and hit advanced settings. It's going to ask for your installer code. Just go ahead and use 1111 if your panel is still factory. If you've updated it that's okay. Just use whatever code you've updated it to. So in this case what we're going to do is we're going to click Wi-Fi. Then you're going to find your Wi-Fi network. I'm going to go ahead and select mine here and then I'm going to put in my Wi-Fi password. We're almost there. Boom, boom. And then you click connect. And if it does connect successfully it should tell you that it's connected successfully. Just give it a moment here. And boom. We are connected to Wi-Fi. As you can see our Wi-Fi connection is successful. We are connected to the GeoWarm network. Ladies and gentlemen after you're done with that you can go ahead and hit the back arrow all the way out. That is how you update or add a new Wi-Fi network to the brand new Qolsys IQ4 panel. If you have any questions or any comments please leave them below. You guys take care, have a great day.