 Hi, I'm Chuck with Razorback Off-Road. Today I want to take a moment and tell you a little bit about the spare tire mount that we've developed for the CF Moto Z-Force side-by-sides. We make this out of inch-and-a-half steel tubing right here in Idaho, so we're really proud to say it's made in the USA, and we offer it in our optional Arbio orange powder coat finish or our standard black powder coat finish. Normally, your tire mount would be the same color, but we've alternated the colors to kind of help the video tell the story a little bit better. When you go to install this, it's very simple. There's just four stock mounting holes. You'll use the factory mounting hardware. Should take you about 15 to 20 minutes to install this. It's very easy. As you can see, it looks really good as a standalone push bumper. You know, on days that you don't want to take a spare tire, you can leave it on and just have a really good push bumper. But the main purpose was to be a spare tire mount. The way we accomplished this is we've designed this with our It Fits mounting system, and as you can see on our spare tire mount, it has the It Fits bracket that'll bolt on right here. But we wanted to make it so that people with wide tires could use it and people with narrow. So what we've done is we've designed our mount with some adjustability into it. As you can see, there's four different mounting holes here, so you can choose narrow tires here and wide tires here. Another thing we've done is we made the slots adjustable to fit all different types of wheels. When you order this from us, it's going to come with 10 millimeter and 12 millimeter studs as well as lug nuts, so it'll fit any ATV tire out there. Installing it, the It Fits mounts very simple. We ship it with four bolts, and we're just going to put it right here and then bolt it on, which I'm going to go ahead and do right now. And we'll cut back to this once I get the mount on. Now as you can see, we've installed the It Fits spare tire mount on. I've went ahead and adjusted it out two whole spacings on it for the spare tire we've got. Now I'm going to go ahead and undo the lug nuts and get ready to mount the spare. The reason I'm showing you this is I wanted to point out that when you ship it, we send these O-rings that keep the bolt from falling out in the event that, or as you're putting on the spare tire, so it sure makes it a lot easier process to do by yourself since we have them on there. I'm going to go ahead and set the bolt spacing out, and now I'm going to reach down and go ahead and grab the spare tire and we'll be right back. Well, as you can see, we've successfully mounted the tire onto the razorback spare tire mount. One thing I do want to point out, there's lots of room, it's very accessible in here. Even when you have a cargo rack on it like this. You know, by adding a spare tire to your CF moto, you really gain peace of mind when you're out on the trail. If you have a flat, you're going to have an easy way home. And I just think it looks very good on the machine as well. We're a small company out of Mountain Home, Idaho, and we appreciate every order. And I also appreciate the fact that you tune into these videos. And I just want to thank you for watching this video. I hope you found it informative, and I really hope to see you out on the trail.