 Γεια σας και ευχαριστώ! Είναι Vicky here και σήμερα είμαι σήμερα με CREATE8, όπου θα δοκιμάσω 8 κατοικές χρησιμοποιημένες από τα τελευταία εργασία, από τα πιο αγαπημένια πράγματα. Για την πρώτη κατοική μου καταλαβαίνω αυτή η καταλαβαίνωση εργασίας και αυτή είναι από ένα τελευταίο εργασίας που είναι Blueprint31 και όπως μπορείτε να δείτε έχω καταλαβαίνει ένα εργασία εργασίας και ένα εργασία εργασίας. Και αυτό που κάνω εδώ είναι ευκολουσιακό. Θα είμαι πmb i want to have some red stripes that are exactly the same size but of course you can use your paper trimmer to do so. I'm just using this die, which comes from a previous release by my favourite things. Just to show you another way on how you can use this type of dies and make the most out of them. Now I'm using glue at the back of this red strips of paper and I'm going to stick them on top of my white panel. Και as you can see I have cut out a template for myself using the same dye just to make sure that all those red strips of paper are nicely aligned and have a nice distance in between them. And of course you can go ahead and make the same look if you have a patent paper with red stripes or you can stamp a line stamp again and again or you can even just use your marker and draw some lines. I just love the dimension that you get when you stick card to stoke on top of card stoke. So anyway I am continuing and here is where I am creating my focal point for my card. So I am using the stamp set you float my boat and I am stamping one of the boats. I am using blueberry ink by my favorite things and for the top part of my boat I need to be a little bit creative So I am going to use the dye, drop inside the top part of my boat making sure that it fits nicely inside the dye. So now I know exactly where it is going to cut out since it is very easy to stamp those sails very far up. So when you go ahead and try to cut out with the dye it is not going to fit perfectly. I hope that makes sense. So now I can go ahead and place my dye there. I am going to run it through my scissors machine and then at the end I am going to stamp the flag just where it fits. Now I am going to create a banner out of this blue card stoke so I need to make sure that this is going to fit my boat nicely and I am going to use my scissors to create a fishtail at the bottom. So now I have my banner ready to go. I am going to stamp the sentiment and for that I am going to use my VersaMarking. I stamped one of the sentiments from the same stamp set that says you float my boat. So I am going to apply white embossing powder, heat set it. And now I am using my crocodile to create two holes at each side of my banner and then I am going to set some eyelets. I am going with gold for the eyelets. Now I have some rules that I always follow when I try to create notical cards. So I always like to have blue and red and white as colors. I always want to have a touch of gold on my cards and I always like to incorporate somehow some string. And you can see on screen right now my recipe for notical cards. So I have thread through the string. I am going to wrap it all around my striped panel. And I am also going to make sure that the panel or the flag is nicely attached on top of my panel. And I am going to tie a bow on one side of that panel. So my panel is ready to go. I am going to stick that on top of a card base. My card base is a standard card that is four and a quarter by five and a half. It is a top folding card and it is exactly the same color of blue as the blue banner on top of my panel. Now let's move on to the second card for today and I am going for a underwater scene. I am working with my Distress Oxide Inks and I am using three colors. You can see the colors I used on your screen right now. I am applying the ink with my blending tools and I am going from lighter to darker. And I really don't worry if it doesn't blend at the moment. This is the first layer and Distress Oxide Ink blends beautifully. You will see that it's going to be super smooth at the end. So now I am going back again over what I have done for my first layer. And now you see how nicely everything blends in. So now I have a nice background for my underwater scene. I am spraying a little bit of water. Hope you can see the droplets there. I am going to leave them for a while so that the ink is going to oxidize. And then I am going to blot everything with a towel. And I repeated this process a couple of times until I got a nice droplet there since I like the result of the reaction with water and Distress Oxide Inks. So now I am going to work on my focal points. I am using the stamp set Ocean Fun and I am going to stamp the jellyfish. There are two different designs of that. And I am going to use different Distress Oxide Inks to stamp them. As you can see Distress Oxide Inks, unlike Distress Ink, stamps beautifully. And I get a nice crisp image. I am going to stamp four times but I ended up using only three of those jellyfish. I am going to use the matching dies to cut them out. And as you can see they don't have eyes at the moment but I am going to stamp them later on. There are actually tiny little stamps for eyes just next to each fish. So I am going to stamp them with black. And this gives them character. You can stamp them close to the center or at the top or looking right or left and I think this makes them really fun. Now in the matching dies you get this die that cuts out a wave and I am going to place that at the very top of my panel and cut it out. Now this was not big enough for the whole top but I am going to use my scissors and just snip only the ends of it. So now I have my ocean ready to go. Now I am going to decide where my jellyfish are going to stay. I am going to add some foam squares at the back and stick them down. And since I don't want my jellyfish to be all alone in that big ocean I am going to stamp a school of fish at the back and for that I am using the darkest distress oxide ink that I used for the background so they look like shadows and as if they are far away at the background. I am also going to stamp some seaweeds at the very bottom and these come from another stamp set from a previous release. And now I am happy with how my panel is looking. I am going to stamp the sentiment. I am working directly on my card base and I am going to stamp one of the sentiments from the same stamp set that say I am so jelly but I am super happy for you. So now I am going to stick my panel on top and I used foam squares at the back. You know I love dimension. And to finish it off I am going to use my white gel pen and add some dots at the center of their eyes as well as use my glitter pen and add some shine all over my jellyfish. Let's move on to the third card and for this card I am going for a very girly card. I am going to use this little fairy and this comes from the stamp set that is called a fairy happy. I am going to stamp one of the little fairies there and I am using black licorice ink by my favorite things because this is alcohol marker friendly and today I am planning to use my Nuvo alcohol markers to try them out since I didn't have a chance to try them. I do have the whole collection. I am going to try them for a few days and then I am going to make a review. So as you can see my little fairy is ready to go. I have also used the matching dies to cut her out and now I am using a white panel and distress oxide inks again with my blending tool and I am going to cover it up completely. And notice how I am not trying to make it super flat. You see that I do get some cloud effects here and there which are actually good because this is not going to look as flat. Otherwise I could also use just a pink cardstock. So now I am going to spray again to add some splashes at the background which are going to give more interest on my background and my panel is ready to go. So this is my sky and in my fairy world the sky can be pink so I am also going to use these new dies they have stitching all around and I am going to cut out some white clouds to make my little fairy pop even more against the background I am going to use this erase stencil this comes from my favorite things from my previous collection. Again I am using the exact same color of distress oxide ink and I am going over it. I am not going to go all over the stencil I just want to have a few arrays just where my little girl is going to stay. I am also going to stamp this trail at the back of my fairy and I used again the same distress oxide ink just because I wanted that line to be very subtle. I am adding some foam tape at the back of my fairy and I am going to stick here on top of my panel. And then I am going to complete my scene by sticking down the clouds that I already have cut out and for the clouds I went directly with glue tape at the back so only the fairy sticks out. On a piece of white cardstock I have stamped the sentiment from the stamp set that says have a very happy birthday and I also used my scissors to create a fishtail on one end I am going to stick down the last cloud for my card and I am going to stick my panel on top of a standard card but rather by 5.5 I decided to go with a white card so that I get a nice white border that matches perfectly with the clouds as well as the sentiment. Now for a fairy card you need to add some glitter and since this is going to a little gear for her birthday I am going to add some white glitter on her wings as well as on the clouds. For that I am using my nouveau glue pen I am going to add glue all over the clouds on her wings I am going to let it dry but this becomes sticky when it dries and then I am applying my glitter and the glitter is going to stick only where that glue has dried and it is sticky. So on the clouds and on her wings and here is a close up look where you can hopefully see the shine which is so difficult to catch on camera and just because the previous card was so gary let's make a card that you can easily give to a man if you wish so I am going to use the stamp set that is called All You Do and there are 5 different designs of owls in this stamp set and I am going to use all of them I am going to stamp them, I am using my mist to do so Now of course you can use your favorite method you can even use your alcohol markers to color the owls but I decided to make a quick and easy card and for that I decided to color everything with my Distress Inks and just because I didn't want the eyes to become colored I want to keep them white but I am going to use my Nouveau Clear Drops this is going to dry clear and you can use your glossy accents to do the exact same thing so this is going to give some shine on the eyes but at the same time it is going to resist distressing now the eyes are all dry I am using my finger dabber and I am going to apply color all over the owls just because I want to keep everything quick and simple I am not going to do any blending I am just using one color for each owl Once everything was colored I used the matching dies to cut them out and you can see them all here as I am popping them out of the cardstock Now everything is really flat I am going to show you a very quick way to add some shadows I am going to use Distress Ink and that is a tea die and I am just going to add with my finger dabber a little bit of this ink at the very bottom of the owls so you can see the owls end up having a little bit of shadow at the bottom as if I have spent hours and hours coloring I am also going to use an orange marker to add a touch of orange on their peaks and the owls are ready to go Now for the background I am working on a craft panel here as you can see and I am going to use the new stencil from my favorite things I am going to use Tea Die and applying it with my finger dabber I am not going to cover up the whole background but I just want to have a little bit of interest here and there Before I go ahead and stick my focal points on top of my panels I always play a little bit around to decide where everything is going to go So now I am ready to stick them down I am using Foam Squares for some of the owls and for some others I am going to stick them directly on top of my card This way I am going to have some layers So for example the orange one has two layers of foam tape at the back So it's way at the front The red and the yellow have only one layer of foam tape and for the green and blue I am going directly on top of the panel with some tape adhesive at the back Now of course you can use any of the old designs and stamp even more of them and especially if you want to add them all the way to the top or if you want to complete the rainbow color order So I am happy with how this is looking at the moment I am going to flip my card at the back I am using my scissors to cut out the excess and just because I love finishing touches I am using my white gel pen adding some highlights here and there on my owls and since this is going to be a happy birthday card I went with the sentiment from the same stamp set that says happy birthday to who happy birthday to you and again I am going to use a brown ink since I don't want this to be very vibrant and it blends nicely with the brown of the cardstock as well as the brown inking on the background So I am going to stick that with some tape adhesive on top of a chocolate brown cardstock and I think this is perfect to give to a man or a girl and just because I am usually struggling with masculine cards and I always have more girly ones on my stash I decided to go with another one that you can give to a boy or a girl just because I need to have some of them on hand So I have stamped this leopards from the stamp set which is called lavable leopards and they sure are and I am using my alcohol markers to color everything I also used the matching dye to cut out my animal and here is where I am creating my background and for that I want to go with a background that looks like a sunset but I am going to use my distressed inks the good old distressed inks these are not oxide inks and I am going to use a combination of three inks from lighter to darker and you can see the colors that I am using right now on your screen I used foam tape at the back of my leopard and I am going to stick him on top of my panel making sure that one end just goes outside one edge So this way it doesn't look as if that branch is floating on the air Now I am going to add some tape adhesive at the back of my panel and I am going to stick it on top of my chocolate cardstock this is a leftover I had from the previous card I stamped a sentiment with plucking and it says I bought a great friend and to finish off my card I am going to add some shine with my glitter pen Now for this card I am going to combine two of my most favorite things from this release and that's the tie that I am using here which is the port hole die and I am going to combine it with a stamp set that is called Party Like a Pirate So I have cut out a hole out of this patterned paper that I have had in my stash forever and I used that just because it features the good grain design at the front So I am going to cover up the back with acetate I am going to cut out the excess and I am going for a shaker card here and this is going to be a very complicated card with lots of steps but it's going to look gorgeous at the end Now for the port hole border I want to use the die with this gold cardstock just to add a touch of shine and I am going to run it through my die cutting machine and then I am going to stick it all around that hole that I already have cut out on my panel and I think it is looking gorgeous already Now for the focal points I am going to stamp the pirate the chest some of the coins as well as the Jolly Rogers and I am going to color everything with my alcohol markers and before I used the matching ties to cut out everything I wanted to show you that you can use your gel pens to add some shine on different parts of the images but at the same time you can add shadows with them So I am adding gold in different parts like the handle of his sword as well as the coins and the lock of the treasure chest and I am also adding a touch of orange on one side which I am blending out with the gold and it really works So I do have shine on these parts of my images and they are really awesome but it is so hard to catch on camera So anyway, I am going to continue I run them through my die cutting machine with the matching dies and I am going to add the sentiment at the very bottom of my panel for that I went with you are the captain of my heart I stamped that with VersaMarking and I am going to white emboss it and then all around that sentiment I am going to stick all my cutouts now for these cutouts I am not going with a foam adhesive at the back just because this is going to be a shaker card it is going to have enough bulk already so you don't need extra but I am going to stick the parrot on top of my chest my treasure chest and by sticking them on top of the sentiment it really provides them a ground so they don't look as if they are floating all over the place Now I have this piece of white cardstock this is just a scrap of cardstock that I am covering up with my Distress Oxide ink and this is going to be the back for my porthole So I have added some Distress Oxide ink there I am spraying with water just to create some splashes and splotches here and there and then I am going to stamp some fish so that it doesn't look so empty I am adding my shaker mix at the porthole window and now I am going to cover it up with the back that I have already created so if I turn it there I hope you can see the beauty and hopefully that mix that I have inside looks as if they are bubbles at the background and if I had to choose just one of all the 8 cards that I made today this would be definitely my favorite and since all the cards that I made up to here were quite involved and difficult to make with lots of steps I am going for a very clean and simple and quick design so I am just going to use my stencil here and I am going over it with my brushes and some Nouveau Mouche you can apply it with a spatula if you wish so and it is going to become more dimensional but I decided to just go with my brushes and you can see on your screen right now the 3 colors that I am using I started with lemon, went to green and then to aqua marine and you will see that they blend beautifully together and they add a beautiful shine and now I am happy with the amount of Nouveau Mouche that I have applied over my stencil so I am going to peel off the stencil for the big revia and I hope you can see how shiny it is I am going to try and catch the light for you it is really beautiful I am going to leave this aside to dry and now that everything is dry I am going to use these happy greetings from the latest release by my favorite things and I am going with the word hello I am going to place it at the bottom of my panel I run it through my die cutting machine and now I am going to pop out all the letters I am going to hold on to this little inside of the letter O because I will be using it later on and for my card base I am going to use this gorgeous cardstock this is a standard card by the way just like everything else I am doing that is 4.25x5.5 it is a top folding card and I am going to stick my panel on top of my card and I want you to see how I rub my finger you see it does not smudge or smear and it does not come off to my fingers so it really is permanent once it dries I get this question a lot so I just wanted to show you this now I am going to place the inside of the letter O and I used the letter as a template just to make sure that I stick that correctly and if you wish you can go ahead and add gems or pearls or even glue drops at those white spots just to embellish your card a little bit more I decided to go with gems just for the 3 of the lines at the top but you can go ahead and go crazy with those and let's move on to the last card for today I am working on a white panel and I am going to use dies from the color drops die set there are actually 6 dies in this set and I am going to use the third one from the smallest ones and I am going to go around it so you can see that I have already cut out 3 of them now I am going to use the word happy from the habit greetings I am going to place it there and secure it and then at the bottom I am going to create the exact same design as I did at the top and to create this design I had to use this die again and again so I had to run this panel a few times through my die cutting machine so now at the back I am going to add some tape adhesive and I am going to place an acetate since I am going for a shaker card and the word happy because it is perfectly readable but if it bothers you to not have the insides of the letter A and P you can also go ahead and add them just like I did now at the back I have added some foam tape all around the frame but I want to cover up the back of the word happy so it stands out even more so I am using a yellow cardstock and you can see how it looks now and just there I am going to add some foam tape as well and by doing so I am just actually creating two different compartments where I can add my shaker mix now at the back I am going to add some of these yellow shaker mix that I have I don't need to add too much and I am going to peel off the backing and stick this patent paper that I have in my stash it actually has little ice creams and I think it is perfect for a summer card and finally I am going to stick that on a yellow standard card that is for a quarter by five and a half and here is a quick look on all the cards that I made for today using the June release by my favorite things don't forget that you can find a full list of all the supplies that I used today down below in the description area as well as on my blog and here are some close up looks of all the cards that I made so these were the cards for today they got inspired and if you did don't forget to leave my comment as well as give me thumbs up on my youtube channel and if you need more inspiration here are two more videos that I created a while back thank you all for watching and have a lovely weekend