 Oh shit, what's up? There's a load more coming out. Yeah. I've done up to damping a flat block, four courses, put a damping underneath the joist, put a damping over the top of the joist, so we're double damped. There you have it. Good morning. We had to time travel a little bit because the GoPro died last night and we didn't have time to change the batteries so we'll give you the update on the next day. So as you can see, it's all tidied up, all the accrues are in at the start. What am I on about? The steel's in, the blocks are in and all the wall is taken out and tidied up. So plan today now is I'm going to get a mix on. That's going to get some hot water for me. Yeah, but I'll put that in the mix now because it's currently zero degrees. It's minus two and we're left and it's got up to zero. Yeah, minus two and we're left. So I just realized I need to grab this mask. So I'm going to get the mix on. I'm going to get this blocked up and then get the steel set in, cut out a little bit for the padstone. Little pocket for the steel and padstone. Yeah, and then that's it. I think while I'm mixing, Dad's going to give that a bit of a clean because it's very rusty so he needs just a bit of a polishing up so the steel can weld on. And... We've explained that to the world, haven't we? Yeah, we've explained all that so. So yeah, that's the plan. Oh, and there's Dad's little genius purchase to keep all the bricks from falling on our heads. But yeah, so enough dilly-dallying and I'll get a mix on in this cold weather is to hear her over there with a zeldi hat on. Right, after break, got over all the little hiccups. I still need to cut them down because the flange that's been welded on was just a bit too deep so I've cut that down with the evolution saw. I've been up there, which you're going to see with the light and prepped all that ready for taking the weld. Right, there you go. Alex took the door out. Well, I tried to. No, we took the door out. So this is all ready to start with the block work now. Basically just straight up. We're going to put the steel in now. Get it with an acro so it's all sat there as you go. Put all the packaging where the joists are because the joists aren't even and then get the block work done. Do you have to show me where the damp course all that's going? Yeah, we'll wait that as we go along because I'm going to put two damps in because there are two damps. We may not just have enough at one end, but we'll see. We've got the evolution saw. We do all the cuts. So we're just building it. I'm not messing around cutting. Once we know what the, you know, once you've got two course, then you know what all your cuts are. Yeah. So I'll put you somewhere while we get this steel in. It's going to go up. It's going to have an acro per hundred for now. Jay, I'm going to come and weld it later and we're going to build this ending and then we'll just leave it propped with two acros. Once the steel's in under an acro, we can take those ones out and we can put two acros underneath it then and then everything can come out. Just repeat that it's been welded before someone says, I stopped putting it properly. This is being welded. I made a mic. Jay and steel are coming when like in the afternoon sometime one day and they're going to weld it to that steel. Look at me. My gaze is going to get sorted. It's a piece of paper somewhere. Do you have a way in here to inspect? It's under there somewhere. I'll show you that anyway. So let's get this steel in. Yeah, we're filming. Filming done. Yeah. Yeah, so they're pointing that way something here is better. Right, onto the cupboard. I suppose it does. Just put the padstone in a bit further on. The padstone. I thought the padstone. Yeah. Oh, we've got 20 of padstones. Yeah. Take that side. It's got that concrete going to be thrown out. It's the flush of the steel. Now that's the padstone, we have to cut the padstone flush of the steel. You hold it steady. Yeah. One or two more turns. Taking the weight. We're going to put another chakra in ready for the welder to be done. Knock that away a bit. That part's not, but the little part is. I think it's just doing that a little bit. Yeah, it's not straight. The welder's filled the gap. I'm going to back off for lunch. Dinner, whatever you want to call it. Steel is in. As you can see, two props underneath it. All the brickwork survived thanks to that galvanised chakra put on it. We just need to pack up underneath the joists where there's gaps because we don't want to double the joists. Starts creaking. We can use packers or wedges for that. It's all ready for the germ steel coming in and getting welded. It's got really good access going there. And I've done up to damping the flat block. Four courses. Put a damping underneath the joist. Put a damping over the top of the joist. So we're double-damped. Got four courses in. Just got the rest of this put in now when we're done. All these three accros are going to be left until maybe tomorrow morning, probably sometime over the weekend. But anyway, we're not taking them down today. We're going to come back for them. So are they coming out tomorrow either? No, we could do in the morning. But we'll see. So that's it. Going to put two padstones in there because the steel's a bit long. Instead of cutting it, we're just going to extend the padstone. Got two there. I've got one there as well. I've got four. So we'll mix and match and make the padstone oversized. So yeah, that's it. We'll get back to it and get this block work finished. Yeah, just getting this nice little brick put in but it was a bit for theft this morning but we finally got the steels up. So all the doors blocked in. Here's truly. And padstone in. I'll give you a proper look around in a second. And we'll be back to show you this with the accros down and with the steel welded in, which I don't think's happening for about five days. Tuesday today, so six days. Yeah. Which one we have for another six days. So until then. Yeah, six days today. What was it? Five days. Five days, whatever. So for now, these accros are staying in, keeping that thing extra secure while all the mortar goes off and until that last bit gets further in but give you a little walk around in a minute but I'll do a little wrap up while. Over 300 feet in there. And accros out. Charge the gun. So that was a tough one but thank you very much for watching. If you enjoyed, be sure to give us a thumbs up. And if you're new to the channel and you want to see more of this or anything else that we do, be sure to hit that subscribe and tap on that bell for notifications that way you'll know every time we upload. It's always a month ago and we really appreciate the support from the channel. This has been Britain with Steve and Alex. With a very, very nice light lintel lintel and a very nice, light steel. We'll see you in the next one.