 Welcome back fellow techies to our latest tutorial video, I am The Technician Project and today's tutorial is going to show you how to change your audio effects from control view to editor view. Now because we're currently in logic version 10.5.1 and we're going to show you now that we're going to upgrade our effects. On this channel here which says Frank, I want to add a EQ, I'm going to add stereo EQ. Now this message pops up and it was a bit off putting to begin with because it wants to change my preferences of a plugins to control the views. Now I pressed OK originally and we're going to go into it. Now this is the control view and sometimes it's a little bit off putting, it's a little bit odd. Now very difficult, very complex. If you're not used to using it this way it is very difficult. What you can do is two ways of changing this. There's the simple way and the hard way. We're going to do the simple way first. If you just go to view here and where it says controls you change it to editor and that will change it to the view we're all used to seeing with the EQ. The other way to do it is to go to logic pro X, preferences, display and under this setting we go to mixer and we want to in plugin windows we want to open in controller view. We want that bit on the tip because we want to open in editor view which is this one here and we apply those settings by hitting exit. Now it should open a compressor now in editor view. It's going to ask us again, we press cancel, there's our editor view. Now you can't change back the control view from the editor view, you can only change forward the control view per editor. You can't go from editor to control. Thanks for watching. Don't forget to like the video if you enjoyed it and subscribe for more and also ding dong that notification bell to get further updates. Thanks again. Goodbye.