6g Pipe Welding Test part3 2" Schedule 80 stick cover pass





The interactive transcript could not be loaded.



Rating is available when the video has been rented.
This feature is not available right now. Please try again later.
Published on Aug 6, 2012


Stick welding the cover pass on a 2 inch 6g pipe test. Using excalibur 7018 rods at around 90-95 amps, We cover a few tips for stick welding the cover pass as well as a brief summary of parts 1 and 2 where we did the root pass and hot pass with tig welding ,

I used an Everlast 160 sth for all the welding on this 6g welding test.

sth stands for stick, tig, and high frequency start....this little welding machine is a very affordable and capable tig inverter that can be used with either foot pedal amperage control , or torch switch.

I used the torch switch for this video but I had a chance to play around with the foot pedal for some other joints.

Lincoln excalibur 7018s are nice. the slag seems to come off more easily than some other rods I have tried....and the excalibur rod has a slightly heavier flux coating that deposits more metal.
This machine compares to other machines like the lincoln v155 and miller maxstar 150 models. Having high freq start is a huge deal because a no touch start is important on jobs like 4130 tubing.



When autoplay is enabled, a suggested video will automatically play next.

Up next

to add this to Watch Later

Add to

Loading playlists...