Loading...

Home made motorcycle lift

11,290 views

Loading...

Loading...

Loading...

Rating is available when the video has been rented.
This feature is not available right now. Please try again later.
Published on Jul 19, 2012

Lifting my Shadow with a homemade lifting device. 2 3-feet long 2x6s screwed together with 2 1/2 inch drywall screws (about 25 in all, on both sides of the boards). A 2x4 along the bottom, and a 1x4 along the top in order to get the wheel(s) off the ground. Depending on where the board is placed, the front or back will leave the ground about an inch or so. The pipe is old fence post donated by a friend. It's almost 2 inches in diameter and about 3-1/2 feet long. I used a 2 inch forstner bit to make the hole through the boards for the pipe.

Loading...

Advertisement
When autoplay is enabled, a suggested video will automatically play next.

Up next


to add this to Watch Later

Add to

Loading playlists...