 Hello, this is Laptop Media, and today, we will show you how to open the HP Elitebook 650G9 and what's inside of it. To open this notebook, you need to undo a total of 5 Phillips head screws. Three of them are captive and will remain attached to the bottom panel. After that, take a plastic tool and pry the panel, starting around the hinge gaps. Please remember, it would be of great help to us if you just hit the like button and subscribe to our channel. That would motivate us to make even more and better videos for you. Our configuration is equipped with a 42.75Wh battery pack. It lasts for 9 hours of web browsing, or 7 hours of video playback. To remove it, unplug the connector from the motherboard, and undo all 6 Phillips head screws that keep it in place. Here, we see 2 Sodom slots for up to 64GB of DDR4 RAM, working in dual channel mode. Storage wise, there is 1 M.2 PCIe X4 slot that supports both Gen3 and Gen4 SSDs. There is a 2nd M.2 PCIe slot, which fits either a WWAN card or a secondary SSD. This laptop's cooling comprises a single heat pipe, a heat sink, and a fan. If you'd like to see more disassembly videos of the latest notebooks we would highly appreciate if you hit the like button and subscribe to the channel.