 Γεια σας, είναι Vicky, εδώ, και καλύτερα για να φτιάξετε 8. Σήμερα θα φτιάξω 8 καρδιά, χρησιμοποιηθούμενοι χρησιμοποιηθούμενοι Με τον Απρήλ στις από τα πιο καθαρισμένες παιδίες μου. Ας ξεκινήσουμε με καρδιά 1. Το στάμψετο που χρησιμοποιηθούμε είναι το στάμψετο από την αρκετά, και προσπαθούμαι κάποιες εμπειρές. Θα προσπαθώ να βρήκατε ένα μικρό σπίτι στον κομμάτι μου, ας θα σταματήσω αυτά τα καρδιά μου, κάποιες εμπειρές. Είμαι χρησιμοποιηθούμενοι να τα σταματήσω πάνω και να χρησιμοποιηθώ ότι χρησιμοποιηθώ ένα μικρό σπίτι που είναι αρκετάκοπος, γιατί θα χρησιμοποιήσω τα σπίτι μου, αρκετάκοπος, μετά να χρησιμοποιηθώ όλοι τα εμπειρές. Και επειδή σε αυτές τις βίντεος, προσπαθώ να προσπαθώ να βρήκατε 8 εμπειρές σε ένα βίντεο, εγώ χρησιμοποιηθώ μέσα από αυτή την εμπειρή στις, πολύ σύντομα. Λοιπόν, βρήκατε να τα σταματήσω όλα τα καρδιά μου, και εγώ θα τα χρησιμοποιηθώ μέσα από την εμπειρή μου, γιατί θα έχω όλα τα καρδιά μου ετοιμικά. Λοιπόν, όπως μπορείς να δεις, έχω λίγες χώρες, λίγες τρεις, αρκετάκοπος, ένα αρκετάκοπος, ένα αρκετάκοπος, όπως και ένα σπίτι. Τώρα, έχω χρησιμοποιηθώ αυτή την εμπειρή, που έρχεται από τα αρκετάκοπος 32, και έχω also cut out a small hill for the bottom of my card και για αυτό χρησιμοποιηθώ αυτή την αρκετάκοπος, από την εμπειρή την σύνταση που έρθει, που έρχεται από τη λό descobική εμπειρή μου. Λοιπόν, τώρα θα αρκετάσω My Grass στο εαυτόνιο benim κόμμα, και τώρα θα πω πάνω και να αρκετάω όλοι τα κομμάτος για να βγω μου π πιστήρι. Για κάποτε γι' αυτό θα χρησιμοποιηθώ κάποτε χύμα, μεταφέρω κάποτε φόμα, και για άλλα, θα θα τα σύντομα, το cosaλα με μια σηκωτοία πανήρα. new that i'm happy with how my sheen is looking i'm adding some black glitter at the eyes of my bear and my birdie and i am going to add some polka dots at each and every banner which embellish as my Otar balloon I am switching colours so I make sure that every banner matches perfectly the rainbow order now if you see there is as much there i manage to make as much but you will see later για να το αφήνω. Θα αφήνω ότι θα αφήνω το κλειδι σε ένα άλλο σπότι να το αφήνω. Και αυτοί, αυτό είναι το μυαλό να χρησιμοποιήσω ένα τελειό αδερφι που είναι πολύ αμπιστικο, μπορείτε να μπορείτε να το αφήνω και να το αφήνω σε ένα άλλο μέρο, χωρίς να το αφήνω. Αν είχα κάνει ένα μέσο, μπορώ να το αφήνω ένα τέτοιο κλειδι για να το αφήνω το μέσο. Έτσι, υπάρχει always a way to save little boobos like this one. So, at the back of my frame I am going to add thin strips of foam tape and I am not going for a shaker card this time. I just want to have a little bit of dimension on my frame and I always believe that having a frame all around your little sin is always giving that nice card is finished. All that's left to do is to add the sentiment and for that I am going with miss you. I am going to stamp that with VersaMarking on top of black cardstock and I am going to white emboss it. And in the blueprints32 there is a tiny little banner that fits perfectly my sentiment which I have used to cut it out and now I am going to stick that just next to my hot air balloon and my card is finished and now let's move on to the second card for that I am using these beautiful butterflies. I am first going to stamp the sentiment and I am working on a white piece of cardstock which is going to be later on my panel for the card so I am going to stamp my sentiment at the very bottom of my card and I am stamping it this at the beginning so I know exactly where I want my butterfly to be. This is quite of a big sentiment and I really love the fonts from this set. So now it's time to stamp the butterfly I am going with pink shades and this is a layering stamp which means that there are actually 3 different layers that you stamp one on top of the other to create beautiful shadows on your butterfly. I have picked up 3 different inkpads from my favorite things and I am going to start with a lighter one which I am going to stamp actually twice just to get a better impression. Then I am going to use the middle color for the second layer and the darker shade of pink for my third layer now I am going to make sure that I will link everything all the ink colors that I used as well as everything else that I used throughout all those 8 cards down below in the description area as well as on my blog and just by using 3 different shades of the same color from lighter to darker you can go ahead and create your own butterflies in any color that you wish. Now I am going to use the matching die I am going to run it through my CISIX machine and you can see that I already have my butterfly cut out but I want to have a negative space on top of my panel. So I am going to place the die exactly where I want it to be. I am going to cut it out. I can use the positive one for another butterfly later on. Now I want to cover up that empty space with some glitter. So I am using just some scrap piece of paper there I am going to cover it up with double sided tape and then I am going to apply some Novo glitter. The glitter that I am using is fine glitter it is in pink color so it matches perfectly the color scheme that I am going for now this card that I am creating is really clean and simple but at the same time it is really striking. So I am using this fine glitter which is so fine that sticks nicely on top of the adhesive and it is not going to move or come into your hands just because it is super thin and especially if you run this piece of paper through your CISIX machine your die cutting machine then it makes sure that this glitter is nicely stuck on top. At the back of my panel I am going to add some foam tape which is going to give some dimension on my panel and then I am going to stick that panel on top of my card base making sure that that butterfly has only glitter at the background which this design looks pretty as it is but I am going to stick now the butterfly that I have already cut out making sure that I add some curve at the butterfly wings and I am going to add a foam tape only at the center of my butterfly at the back of her body so it has a beautiful dimension a very simple card but really beautiful and now let's move on to the third card for that I am going with those beautiful doodle designed flowers and I am going to create a card with flower arrangement so first I am going to stamp everything I am using my missus so that I can stamp many images at once I am going to use my alcohol markers to color all the flowers and then I am going to use the matching dies the images so now I have all my cutouts ready to go you can see my flowers up there on my screen and I am going to use these dome dies which give a beautiful stitching all around so I am going to cut out a window in this panel this is just a white cardstock and this is going to be the main panel for my card so at the back I am going to make sure that I add some tape adhesive to add the dimension that I always love to have on my cards and I am going to cover up the back with this blue cardstock and although I am not going for a shaker card I pretty much follow the same rules here so now I have a nice place where I can nest all those flowers with that beautiful domed background I am going to decide where everything is going to go and then I am going to use some formed squares at the back and stick them down to see how my flower arrangement is looking at the moment and to continue that doodle design of the flowers I decided to add little dots all over the place and I think that I am taking that doodle design a step further and I really love the effect of all those dots there it really compliments the design of those flowers and now that my panel is ready I am going to stick it on top of a standard card that is 4.25x5.5 I need to stamp the sentiment and I decided to go with the one that says make today beautiful I have stamped it on black cardstock and a white emboss it and now I am going to create a tail on one side and then stick it directly on top of my card base with some tape adhesive at the back and I always love how striking those sentiments are when you make them on white on black as a final touch I am going to add some white nouveau drops at the center of that big flower and my card is ready and now let's move on to the next card I am using the adorable koalas set and I am going to stamp the tree as well as one of the koalas that is holding a little one now this is a really adorable card and it's certainly one of my favourites that I am sharing today I am going to stamp with black ink and then color with my alcohol markers and then cut out everything just like I did for all the previous cards and now I am going to work on my panel so I have a piece of white cardstock and I am going to use one of those dome dies that give you that beautiful stitching and I am going to use my tear ruler there just to make sure that I place that straight and then I am going to run it through my tie cutting machine so now I have that beautiful window and I am going to create a little scene at the back of it you can of course go ahead and create a shaker card out of it but I am just going to leave it as is and I'll just try to add a little bit of dimension with that so just to create my scene and because I want to match everything with the sentiment that I am planning to use I did stamp some of those clouds that come from the set that I used in the beginning the one that is called in the air so now I have a black panel which I am going to stick directly on top of my card base and by the way this is a standard card that's 4.25 x 5.5 I am sticking that blue panel at the back which is going to serve as my sky and now on the window I am going to add some foam tape to add a little bit of dimension and I am going to stick that on top of my base before I go ahead and assemble my card I am going to stamp the sentiment I am going for the white embossing powder on top of black cardstock again I really like that look and the sentiment that I have chosen says I'd clump the highest branch for you now I am going to cut that out by using one of the stitched window dies that match perfectly the sentiment and now I am going to stick that by using some foam tape at the back now I have all the parts ready to go and I am ready to assemble my card so first I am going to place that there so that I know how far the sentiment will go and now I can stick down my tree I am trying to decide the placement there and then I am going to use some foam tape and some tape glue at the back those little elements to create my scene and by sticking all those clouds there it really gives the illusion that this branch is really going very high just like my sentiment says now I am going to add some shine the eyes of my koalas and I am also going to add some shine with my clear aquaflow pen and I did add shine at their noses the clouds, the leaves pretty much everywhere and this pen adds a lot of shimmer I hope you can see how shiny it looks a really adorable card and it would be a great design to welcome a new baby as well if you change the sentiment now I am going for a very clean and simple looking card now but at the same time it's going to be very bright and very fresh looking so I am going to cover up this piece of white cardstock and I am using the rubber stamp one of my favourite things and I am covering it up with VersaMarking and I went through my stash to find some yellow embossing powder that was quite bright and I found this one by Ranger so I am going to cover up the whole background with yellow and then I am going to heat set it and now that I have my background ready to go I am going to create my focal point and I am going to stamp the cute little girl from the fresh squeezed stamp set and I am just stamping it on this dome but I will end up cutting everything out with the dye I just used that since it was a scrap from a previous card I am going to use my Spectre Noir markers these are alcohol markers to colour everything and I am going with mainly yellow shades just because he is holding a lemonade so my little girl is ready but I have also used the dye this is a dye from the latest release which is called sentiment label strip and I have cut it out from white cardstock I am going to stamp the sentiment on one side of the label strip and I am going with the sentiment that says you are the sugar in my lemonade I think this is an adorable sentiment and I can stick the girl just next to it so for my card base I am using a bright yellow cardstock that is 4.25 x 5.5 I used my tape runner at the back of my panel and stuck that at the centre of my card base and now I am using some foam tape at the back of the label strip and centre it on top of my card and finally I am going to stick the little girl on top of that label strip again I am using some foam squares to add the dimension that I want and the card is ready now I am going to create an interactive card and first I am going to stamp some of those birdies from the stamp set which is called tweet wishes it comes with adorable owls and birds but I am going for the birds only today I am actually going to stamp 4 of them but I ended up using only 3 and just for the fun of it I decided to use my prismacolor pencils to colour all the birdies the alohol markers that I would normally use and although I usually forget to use them they are really easy to blend and they give beautiful results so after colouring all the 3 birds that I am going to end up using I am going to use the matching dice and run them through my big shot and as you can see the little birdies are ready to go now I am going to work a little bit on my background and I have this white panel to stamp repeatedly this leaf and by the way the leaf is from the same stamp set as the birds I am stamping the leaf in a row to create a little pattern at the background and if you notice I am not measuring and I haven't drawn any lines or anything it doesn't have to be perfect but it's quite simple to line them up I have created 2 rows of these leaves and I am going to use my prisma colour pencils again to colour them in I am using 3 different shades of green a lighter and middle colour and a darker one I am going to show you how I did one leaf and then I will move forward to when I have coloured everything now I am going to line up this die and this comes from a previous release by my favourite things and it actually cuts out 3 little windows with a flap I think this is an adorable die and it really gives a beautiful and interactive design so I am going to place this yellow cardstock at the back of those windows and I chose to have a green cardstock as my card base so this is again a standard card that's 4.25x5.5 and I made sure that the yellow panel is exactly stuck at the back of those windows so now I am going to place some tape adhesive at the back of the birds and decide where everything is going to go and now that I am happy with the placement of all those birds I am going to add some foam tape at the back of the white panel and then stick it down making sure that I align it perfectly so that you can see the little birdies through those windows and for the sentiment I chose to go with tweet wishes which I think is really adorable with all those birdies in the card but I really advise you to stamp the sentiment before you stick the panel on top of the card but I was quite lucky and got a good impression so my card is ready for the next card I am going to use this adorable frog from the springtime critters stamp set I am going to stamp the frog and then color him with my spectrum noir markers I am going to use 3 different shades and once my frog is ready I am going to use the matching dye to cut him out and although the frog looks adorable just like that when I placed on top those googly eyes I thought that it became super cute and adorable so I decided to stick them down and as you can see one is smaller than the other which makes a really hilarious image and now I am preparing my panel there I am using a spiced marmalade and with my blending tool I am just going all over the stencil and this is a stencil from a previous release by my favorite things for my sentiment I am using the one that says you always bring a smile to my face with that big smile of my little froggy and I am going to stamp that with black ink at the very bottom of my panel now I can add some foam tape with the back of my frog and stick it at the center of that stenciled area and for such a happy and bright card I am going with yellow cardstock for the background I am going to stick the panel on top of my card base and that's a standard card that's 4.25x5.5 and my card is pretty much finished I am going to finish it off using some dots these are crystal drops and I am going to add a little bit of pale green at his cheeks and then I am going to use some jewel drops which are tinted yellow but transparent, translucent and I am going to add little drops all over all those rays and these dots give a dimension and a fun extra element on my card Now let's move on to the last card for today I am going to use this adorable stamp set with all those cute dogs and I am working on a craft cardstock I am going to stamp some of those dogs I am using a brown ink and that's by my favorite things and it's the color of milk chocolate Usually my cards are very feminine all they have lots of color which is perfect for little kids but today I thought I should make at least one a masculine one and I am going to keep these monochromatic cards so I am playing with shades of brown I have already cut out a panel and I am going to stamp that background on top and again I am using the same ink that I used to stamp the little dogs and now my background panel is ready I am going to create a window to stamp the sentiment inside and for that I am using the rectangle world windows from the latest release I am going to cut out a window which is going to leave a nice stitching all around that window and now I am temporarily securing that panel on top of my card base so that I can stamp the sentiment I used the sentiment that says you are one of my favorite humans again I am using the same brown ink that I used throughout the card and now it's time for my go to technique I am adding some foam tape at the back to add my dimension and then I am going to stick that panel on top of my card base so the card base is the same cardstock as the little dogs so that makes a perfect match you can stick the dogs directly on top of your card base without doing any coloring I decided to do just a little bit of coloring to add a little bit of shading so I am coloring the noses in dark brown and now with my prismacolor pencil I am adding a little bit of shadow only at the edges of each of the dogs then I am going to blend that out by using my gumsol the gumsol is going to soften those shadows and once the gumsol dries it's going to look even softer then it looks at the moment for the look I am going for I didn't want to add too much coloring I just wanted to keep everything nice and simple I am going to repeat the same process to the other two dogs and then by using some form squares at the back of the dogs I am going to stick them on top of my card and I think this is a adorable card although it is masculine looking now I am going to add some shine at their noses and that's Nuvo Drops but it dries clear so it's pretty much like glossy accents and finally I have punched out a red heart which I am going to stick on one of the dogs just for a touch of color and these were the cards that I have created for today I hope you had fun and got inspired and if you did don't forget to leave me a comment as well as give me thumbs up on my youtube channel here are the photos of all the cards that I have created for today and if you need more inspiration you can click on any of those two videos that I have created a while back thank you all for watching