 Hey guys, welcome back to Come Again TV. We're all geek culture collides today. I'm gonna be taking another look at the 2016 Mattel Ghostbusters classics line Winston Zedemore Winston was portrayed by Ernie Hudson in both films as well as the video game and A quick little note Ernie did try to play Winston in the real Ghostbusters cartoon However, that was ultimately turned over to our Cineal Hall Not sure why they did it that way because you would think if the live-action Actor wanted to voice the character in animation. They would go for it, but We ended up with our Cineal Hall. So with that being said let's go ahead and take a look at this guy we'll take his a Neutron wand out of his hands. We'll plug it into his pack. There is a peg right there and There's a slot right there Should just peg right in They can be slightly difficult the very first time that one went on no problem Let's go ahead and take his pack off real quick So we can get a better look at the figure himself All right, so first things first I noticed when I was doing the review the Egon review that They actually reused Packs from a previous line copyright 2011 and these figures came out in 2016. So But very nice detail in the pack You got the four lights there that are actually pistons in the video game when the pack overheats those pop out And you got to stop blasting for a little while to let it cool down they go back in Resets and you're good to go, but very good likeness As I said before I do wish Mattel would have released these guys with a few more accessories You know Peter should have came with Peter should have came with maybe a radio in his hand and the little air plunge air plunger thingy that he used to investigate Dana's apartment Ray should have came with his goggles and maybe a radio Winston should have came with maybe I don't know maybe a I don't think they could have done cigarettes Maybe a Twinkie Maybe a trap Egon could have came with a PK emeter And a few trays for his spores moles and fungus collection But as you can see here, they did get a fairly decent likeness to Ernie Hudson Which is a lot more than I can say for the Ray stands figure Ray stands didn't really look that much like Dan acroid I wish they would have done a better job with that, but it does look like They did a really good job with Ernie Hudson's likeness here. All right, so His head can rock up and down Side-to-side it is on a ball joint However, sorry about that guys. I had to turn the light on so you guys feel a little bit better however Unlike the Ray figure his head doesn't really move that much And I think it has to mainly do with the ball joint Ray's kind of just sat in there He had kind of a slimmer neck whereas Winston Egon and Peter have Thicker nexus seems like thicker ball joints So they don't really get as much articulation and The collar does kind of hinder things as well so far articulation As I've said in previous shows as soon as I get these guys and get them out of the box I take a look at them real quick and then they go up on my shelf. So their joints are very very tight Go up to there go all the way around and as I said previously in other in reviewing the other Ghostbusters, I wish their joints would have been on the inside in The elbow pads rather than under the elbow pads. It really makes it difficult. You can't really straighten out their arms hardly at all That right there is as straight as they're gonna get Which sucks especially if you're gonna display them Maybe with their proton packs out in front of them or off to the side or maybe holding them in their hands you know or Them with their packs on but their neutrino wands holstered They won't really they can't really straighten out their arms Really kind of sucks. I don't display my own like that But I know some collectors might want to So anyway, he does have a waist swivel and as with most as with the other Ghostbusters when you do move his legs this piece of His belt does kind of hit against the hose here So you got to kind of lift that out of the way Before he can lift his leg goes up that high go back that far and Can go out to the side just like that You got thigh swivel you got Knee joint You've got boot swivel right at the Calf and then you've got an ankle rocker. No side to side just up and down Front to back whatever you want to call it Overall not bad. I do like how these guys look take a look at the writing on here 2000 so it looks like they may have used the body's previous line as well and Maybe just updated the heads Perhaps not entirely sure but it does seem to be that way 2009 made in China Mattel So they just pretty much Frankenstein'd These guys together and then resold them You've got packs from a 2011 toy line You've got the bodies from 2009 toy line and then the heads from 2016 I have to say I'm a little disappointed in Mattel for that This is the first I'm seeing of that. I noticed the 2011 proton packs earlier in When I was reviewing Egon and again with Ray, however, I did not realize That the Ghostbusters bodies were made in 2009. So again, it seems they may have may have just Use the older bodies and the older proton packs and the only thing that got updated were the heads I will have to do some research on that though guys and Double-check on that, but I'm pretty sure that's what they did now to put the proton packs back on as far as you can Try to get them straightened out as much as possible It's gonna be kind of difficult and you want to be very careful because the straps do tend to hang up on the elbow pads And it is a softer plastic, but that just means It's easy to tear there. You have it Go ahead and pop the neutrino wand off and stick it in his hand Winston Zeta more as portrayed By Ernie Hudson. Hope you enjoyed these review guys Once I finished the 2016 answer the call Ghostbusters collection. I will be taking another look at those individually So far all I've got now is Abby Yates And I just did a review on her not that long ago, so I'm not gonna go do a second review on her just yet We'll go ahead and wait until I get the other three coming up next though We'll be taking a look at the combiner piece that came with this toy line the no-go symbol So tune in then