 Hello, this is LaptopMedia, and today, we will show you how to open the HP Probook for 50G 10 and what's inside of it. To get inside this notebook, you need to undo a total of 5 Philips head screws. Then, pry the bottom panel, starting from the gap in the back. Please remember, it would be of great help to us if you just hit the like button and subscribe to our channel. That would motivate us to make even more and better videos for you. Our configuration is equipped with a 51.3Wh battery pack. It lasts for 8 hours and 30 minutes of web browsing, or 7 hours and 30 minutes of video playback. To take it out, unplug it from the motherboard, and undo the 6 Philips head screws that keep it attached to the chassis. Here, you get 2 Sodium slots that work with DDR4 memory in dual channel mode. As for storage, there are 2 M.2 PCIe X4 slots, one of which supports Gen4 SSDs. The cooling setup here is pretty simple, as the laptop only has one heat pipe, one heat sink, and a single fan. If you'd like to see more disassembly videos of the latest notebooks we would highly appreciate if you hit the like button and subscribe to the channel.