 Γεια σας! Είμαι Βίκη και σήμερα θα φτιάξω 10 καρδιά, φτιάξω τα πιο από την καρδιά σήμερα by Simon Says Stump. Αυτή ήταν η καρδιά εξαιρετική που εφαρειάζει τώρα, αλλά θα φτιάξω να δείξω σε όλες τις προσφασίες συγκεκριμένοι. Λοιπόν, ας δείξουμε έναν κομμάτι για να παρακολουθήσεις. Υπάρχει 4 κομμάτρες από Little B, ένα στενσίδι από Τυμ Holtz. Υπάρχει ένα στενσίδι, που είναι αφού των σημερινών και συγκεκριμένων για κρίσμα, έναν κομμάτι πρισματικό, όπως και έναν στενσίδι. Υπάρχει ένα πίκυρο με αλυκότητας, όπως και τα στιγμή τρεις δημιουργικές. Ένας κομμάτις, ένας κομμάτις, έχουν αγήση στον κομμάτι. Υπάρχει κάποιο καρδιά συγκεκριμένοι σε 6x6 κομμάτρες. Ένα κομμάτι με αλυκότητα, και ένα κομμάτις. Τώρα θα ανοίξω αυτή η πλαστική στιγμή και δείξω όλα τα διαφορετικά κομμάτρες που βρίσκομαι inside. 3 αγήσης, 2 κομμάτρες, έναν κομμάτι με αλυκότητα, και 2 κομμάτρες. One is a textured paste, and the other one is grit paste. Έχεις also get 8 different tags, 4 in this color, and 4 in craft color. Έχεις also get a dye that cuts out a little reindeer. Έχεις also get 4 different little envelopes. Έχεις also get 2 card bases for standard cards, and one more white one, a big envelope, and 4 smaller ones. Finally you get 5 different colors of cardstock that I am going to cut in half and score to create my 10 card bases. For my first card I am working on the brown card base and I am going to stamp the sentiment. For the sentiment I am going with the one that says Merry Christmas, and all around that sentiment I am going to impose some of the tiny little stars. So I am going to pick them up here and then stamp with VersaMarking. Now I want to add even more stars on my little scene, so I am going to pick some up with my tiny little stamping block and add some all around. Now I am going to apply the gold imposing powder that was included in the kit and I am going to use my heat gun to heat set everything. To create my little scene I am going to cut out some snowbanks. I am using the panel that was included in the kit. This panel was actually a kind of iridescent and very shiny. I used my lone foam dies to cut out the snowbanks and now I am going to use some foam tape at the back to create the snowbanks at the very bottom of my card. On the second piece I am going to double up on foam tape. This is going to give me the ability to have even more dimension on my card. Now as you can see here the snow isn't white and I am going for a more vintage looking card here. And pretty much all the cards that I made today were more on the vintage looking style and that's because that's the color combo of this card kit. So my base is ready now. All I have to do is to stick the trees. Now these are dimensional sticker trees. I am just going to try and decide where everything is going to go. And my card is finished. So now let's move on to the second card where I am using the stencil by Tim Holtz. And I love this stencil because not only it gives you two designs a smaller and a larger tree but it also gives you the ability to add snow on top. Now I am going to go with my finger dapper and add some ink through that stencil to create the first tree and I will end up doing that three times. And if you notice I am using both the green colors that were provided in the kit and I am mixing them directly on top of the paper through the stencil. So once I am happy with the ink here I am going to peel it off and then move the mask next to that tree and create another one. And here I have created the third tree. So again I am doing the exact same technique I am going to peel it off and you can see how it looks at the moment. Now all I need to do now is to clean the stencil from the ink and then come back again and add the snow. And because this tracing is not permanent if you add any type of medium on top such as the ones that were provided in the kit I mean the texture paste or the grit paste the ink is going to bleed through that paste and it's going to turn out pale green So I am showing you here a great way to overcome this problem. I have used the stencil over the trees and I went over them with VersaMark ink which is going to give me the ability to emboss with clear embossing powder. So what this is going to do is to turn the trees more shiny but at the same time it's going to lock that ink on the paper so it is not going to bleed no matter what we do on top. There are more techniques to turn the stress ink into a permanent ink and I am going to post three different ways to do so later on today so make sure to look for that video as well. So now that my trees are ready you can see how nice and shiny they are I am able to use again the stencil on top and add some texture paste or some grit paste and this time I decided to go with grit paste because it has more texture inside it's like more of the snow texture and I am going to use the second design over the big tree and to do so I am just making sure that I align the tree trunk and I am going over it with my spatula. Now if you are a patient you have to wait for this to dry before you go ahead and do the next tree because the stencil might make a mess on the paste that is not dry yet but just because I am not a patient at all I am going to go ahead and do it directly and now for the third tree now I have to be super careful not to make a mess on the other paste but I just couldn't wait for that to dry and it turned out to be ok so my trees are ready now and you can see how beautiful they look and all I have to do now is to create my little scene for that I have cut out again my snowbanks and this time out of white cardstock and I am going to stick it at the very bottom of my card base just like I did on the first card now I am applying some powder with my embossing tool because I am going to do some embossing now Again I am going to use the same sentiment as I did in the first card I am going with Merry Christmas which I am going to white emboss it and as you can see this is pretty much the same design as the first card that I created but just with totally different techniques so I am going to apply my white embossing powder heat set it and I am going to use my white Nuvo drops to add some snow for this card I am working directly on the card that is red and I am going to hang some of the ornaments from the top of the card and I am going to also hang the word joy as if it was an ornament as well so I am going to decide where everything is going to go stick them down and I am also going to go with don't forget the dot there and I am also going to stick two of the bigger ornaments on one side and on the other this is a very simple design and really quick to make so after deciding where everything is going to go I am going to bring in my T-Ruler and I am going to make sure where I need to poke the holes at the top of the card so that everything is going to hang straight I am just going to make a mark at the very top for each one of the ornaments and I am going to bring in my Cropa Dial and I am going to make three little notches so I am creating actually the holes where I am going to thread through that wine where the ornaments are hanging from and I also need to poke some holes at the very top of those ornaments and with the help of the needle I am going to thread through that wine and then tie a bow I am going to show you once how I did that and I am going to repeat the exact same process for the rest of the ornaments now as I am doing that just to let you know that you can find a full list of all the supplies that I am using today down below the description area as well as on my blog and finally to finish it off I am using my white gel pen and I am going all around the edges to create some faux stitching I felt that I needed to create a border that brought everything together so that is the third card for today now let's move on to the next card for this card I am going to work with patterned paper the one with the stripes and I am going to die cut a banner the die that I am using comes from an exclusive Simon's stamp die set that has many different sizes of banners and I have also cut out a rectangle out of this glitter paper which I am going to stick at the very center of the card if you notice it is slightly smaller than a standard card so that it leaves a nice border all around now at the bottom of this banner I am going to stamp with VersaMark ink the same from the stamp set that was included in the kit that says hold the wishes and I am going to white emboss it and you will see that once I finish heat setting the sentiment it's not too vibrant and you can't really tell what it's saying just because the background is so busy with all those stripes but there is a great solution for that just go over it with some distressing and then everything is going to pop nicely I am going to ink up the edges on the banner and since I did that on the banner and I just have to do the same thing for the edges of the card so this is going to have the same look and it's going to bring everything together and now it's time to embellish the banner for that I am going to stick one of those wreaths and I am going to chop off the top of the banner because it was too white so now I am going to ink up the edge again and I am going to stick it at the top of my card now to add even more interest on my banner I am going to tie a bow out of this red satin ribbon I am going to cut out the edges trim the edges of the ribbon so that it's nice and tiny and then I am going to stick it on top of the wreath with some glue dot and while I was doing this card ginger was here he wanted to say hi he is looking for that lollipop in the card kit he gets crazy when he smells things like that so anyway I am going to apply some foam tape at the back of this banner to add some dimension and then stick it on top of my card base now to add the finishing touch I am going to use the stickers that was included in the kit and I am going to add some of that on top of the red bubbles that are on the wreath already this is going to give them some shine and it's going to finish off the card for this card I am working with the leftover that I have from the previous card so I am going to die cut the reindeer out of this glitter paper I am going to carefully make sure that I take everything apart it does die cut nicely but you have to be very careful as you take apart everything and now I am going to work on the brown card base now for that I want to create a hole and stick the reindeer at the inside of the card so you get a little window where you can see through I am deciding where the circle is going to go but I don't want to cut out the whole circle so with my T-Roller I am going to create a line so that I know where I want to cut exactly so I am going to do some partial die cutting I am going to place it so that the lines that I have drawn are lined up with the end of the cutting plates and also notice how one flap of the card is underneath the cutting plates so this is going to make sure that I cut out only through one layer of the card and not both so this is what I end up having and now I am going to use my T-Roller and my craft knife and cut out that piece and I end up having that little window there where I can put inside my little reindeer now all I have to do is to assemble my card so I am going to draw exactly where that window falls on the inside and if you notice the reindeer is turning his head and looking on the right of the card so this is where you are going to write the message and I think it's really cute and adorable since the reindeer is really reading what you have wrote down now I am going to make sure that I erase all those pencil lines and I am going to use again that leftover from the previous card and cut out a little strip of paper and then from this pattern paper I am also going to cut out a piece and I am going to put them at the very bottom of the reindeer in the front of the card just to add some interest and some pop of color I am going to stick everything directly on top of the card with my tape adhesive no foam adhesive here I am going to use my scissors to cut off the excess of the paper and then at the top I am going to stick that red strip of glitter paper now I have some more leftover of that glitter paper and on the inside I am going to add a strip at the very bottom so that I give some ground on my reindeer I am going to use my scissors to cut off the excess and now for the sentiment I am going to white emboss it I am using the sentiment from the stamp set that says have a swell and then I am going to stamp it with the Versa marking and apply my white embossing powder now with my white gel pen I am going all around that window and I am adding some force teaching which is going to bring everything together since I have a white sentiment on my card and to finish it off I am going to use some white thread and I am going to tie a bow so you see that I used again the same technique like I did in a previous card using my cropped dial so now I am going to tie the bow and my card is finished for this card I am working with pattern paper again I have cut it out to be slightly smaller than a standard card and I am inking up the edges with distress ink I am going for a very vintage looking card and to emboss it I am going to use some of the images from this pattern paper so I am cutting out a strip of paper I am going to ink up the edges just like I did for the panel of my card and now I am going to stick that with tape adhesive on top of the glitter paper with the green color making sure that I leave a small border on one side so now I am going to use my paper trimmer I am going to cut it out again making sure that I have again a little bit of that glitter sticking out from the other side and I am going to cut off the excess from that strip of paper and then I am going to use some foam tape and stick it directly on top of my panel for my card base I am going to use the red cardstock and I am going to stick the panel that I have already prepared at the top with some tape adhesive now you can stop the sentiment at the bottom corner of the card I decided to go without sentiment for this one and now it's time to make the shaker card for today so I am going to peel off some of this glitter paper and I am going to stick it on top of some white panel this is a heavy cardstock and just because this glitter paper is very thin I am going to stick that on top so that it's thicker and nicer to create a window out of that the die I am using is by Simon Says Stamp and it's going to cut out 3 square windows now I am going to do the same process that I do all the time for my shaker cards I am going to apply some tape adhesive at the back stick my acetate which is going to cover up all 3 windows and then I am going to use my foam square and create the little pockets now I am using the glitter that was included in the kit and I am going to apply some with a spoon on all 3 windows and this is going to end up looking just a snow it's really great to use this glitter for your shaker cards now I have cut out small little images there is a patterned paper in the kit that is full of tiny little images and I am going to use some of them at the back of those 3 windows so here is how all the 3 windows are looking at the moment with the snow inside and now I am going to use my scissors and chop off all the excess paper now I decided to work on the vanilla card base and I am going to cover it up with this patterned paper again I have cut it out to be slightly smaller than the standard card and then on top I am going to stick my 3 windows now this is a really fun card out of this patterned paper I used my scissors and I have fuzzy cut 2 Santa Claus one of them I am going to use in this card and the other one I am going to use in a card later on so I am going to use my rectangle nested dies and I have cut out this frame I am going to use some foam tape at the back of this frame and then I am going to stick it directly on top of my card base for my card base I have used the craft colored card base I am sticking it down and then I am going to apply some tape adhesive and stick the Santa as if he is looking through that window now to add more interest on the frame I have used my nested dies again and cut out this frame out of the leftover that I have from that green glitter paper I am going to stick it on top of the other frame which is going to give more definition to the frame and some sparkle you always want sparkle on your Christmas cards and now I am going to use this Spitz bubble die this comes from a very old set by Simon Says Stamp but I am going to stamp the sentiment now for the sentiment I went ahead and stamped holiday wishes and I am going to stamp it with VersaMarking and then emboss it with red embossing powder I am going to stick the Spitz bubble on my card and my card is finished now for this card I am going to work directly on the card base and I am going for a tone on tone background here so I am going to stamp a tiny little images from the stamp set to create some interest on the background I am doing so with my VersaMarking and once I am happy with all the stamping at the back I am going to apply some clear embossing powder which is going to give some shine and definition to the stamped images but it is not going to steal anything from the focal points of the card so this is where I am applying my clear embossing powder they will end up looking shiny and I didn't bother to stamp at the center of the card because I am going to stick some things on top I am inking up the edges to get that vintage look and then I am going to ink up the edges from the rest of the papers that I have these are all leftovers from previous cards so this is one that I have used in previous card and I am going to use some foam tip at the back and stick it at the center of my card and then I am also going to use this tiny little image this comes from that pattern paper which was full of little images that I have used for my shaker card if you remember I am going to ink it up and I like that it says at the top Santa's List and I made sure that I gave some movement to that paper so I have carried up the edges and now at the center of that Santa's List piece of paper I am going to stick the wreath now from the pattern paper that I have cut out those Santa's I am going to use one of them here so he is going to stay there looking at his list and this is going to finish off the card and now for the last card for today I am going for a very clean and simple look which is really easy to replicate so on this scrap piece of white paper I am going to stamp the sentiment but I tried to match the color of the ink with the color of my card base so I went with holiday wishes I am going to use my scissors and cut out this on a curve so this is going to be the snowbank for my card and then I am going to add some tape adhesive at the back stick it at the top of my card and then create my little scene for that I am going to use the stickers that I have left over the stickers that were included in the kit so I am creating my little scene by sticking down the tree the house and a little star a really simple design but I love the look so now let's take a quick look on all the cards that I have created making the most out of the holiday limited edition card kit by Simon Says Stamp and let's take a quick look on the leftovers now this was packed with some products so you can see that I still have all the mediums, the ink pads and the stickers of course I have some stickers left over I do have the stencil for many more cards the thread that I haven't used the die and the stamps really great touch builder this kit I still have some glitter I have the pencil that I haven't used at all the tags that I didn't make and of course I have all the envelopes and the paper bag now I am going to show you what I have left over from the papers I have some strip of pattern paper I do have that with Santas and some tiny little images that I still haven't used as well as one of the panels so these were the cards for today I hope you had fun and got inspired and if you did don't forget to leave me a comment as well as give me thumbs up on my youtube channel