 Γεια σας, είναι Vicky, εδώ και καλώς ήρθατε! Στην Βίκαια έχω ένα καλό επίπεδο, θα πω ένα βίντεο από πέντε, μέχρι φράγμα και θα φτιάξω πένι-πλάκ σταμπς. Λοιπόν, για σήμερα θα πάρω για ένα πολύ κύριο παιδί και θα χρησιμοποιήσω αυτήν την αδορρυμότητα. Αυτή είναι η σταμπς από πένι-πλάκ, η οποία είναι called Fairy Flatters και θα βρεις λίξες από πίσω της δισκρυπσιακής για όλα αυτά που θα χρησιμοποιήσω σήμερα. Σταμπίζω μία νασθάω μία πλαμπς από πέντε ε musipluu και θα χρησιμοποιώ μία μυαλή πιστάρος για να χρησιμοποιήσω μου αντιμετώσεις να χρησιμοποιώ μια εγώρες. Στην εγώ θα χρησιμοποιώ μια βιντεορυμότητα για να ασφαλώσω μία νασθαλαρώ τον φθ partager παραδειά για να με slown and να μεagueυουμε τον νετιέτο και θα βρεις τη σταμπί σε τωρή για ατωρή, Θα πουνταμβουλήθηκα τίποτα που χρειαζε στην ώρα, και αυτό είναι λόγητα για να τα χρησιμοποιωθύω στους ευδοταστά. Τωρα που ό ruralαν τα στους ευδοκλαίες μου θα κάνω να χρησιμοποιώ και χρησιμοποιώ τα νεκρητικά μου σκοπιά εύκολα για να τα χρησιμοποιώ everything. Στην αυτό το κόσμο είμαι χρησιμοποιώ τα νεκρητικά μου σκοπιά και μπορείς να δείσεις τα εργάκοσες που vale για την φαγησία Και θα δούμε τώρα ότι η φαίναση που βρίσκω στο στιγμή δεν θα δημιουργήσει τίποτα, επειδή εγώ πιστεύω να κρατήσω τη δεύτερη φαίναση και να το βάζω στο κόμμα. Τώρα, όχι αν θέλεις να κρατήσεις ένα φαίναση στο κόμμα από το άλλο με ένα λίγο φόντιπο στο κόμμα, θα μπορείς να δείξεις underneath όταν βρίσκεις την καρδιά. Δεν θέλω να δείξεις έναν κόμματικό κόμμα underneath, δημιουργήσω να το βρίσκω όλοι as normal. Ελπίζω να το βρίσκω. Τώρα θα χρησιμοποιήσω τα φαίναση μου για να κρατήσω τη δεύτερη φαίναση και τότε θα δώσω μία φαίναση λίγο φόρτι στο κόμμα. Όταν έχω κρατήσει όλα τα φαίναση θα χρησιμοποιήσω τα φαίναση μου για να κρατήσω τα φαίναση μου. Τώρα, δείξεις πώς θα χρησιμοποιήσω τα φαίναση μου. Θα χρησιμοποιήσω το κόμματικό κόμμα, όπως είναι. Είμαι very carefully going all around the edges with my scissors following the black lines. Notice how I move the paper and not the scissors, which is making this easier than it looks. From the second image I am only going to cut out the head. I'm not paying any attention on any hairs that are coming out. Of course I'm going to cut out the ears. Carefully going all around the black lines. And finally I'm going to cut out the acetate. I'm not going to separate the wings because this is going to help me later on to stick everything down. So I'm just going to create a bridge from one wing to the other. And now that I have all the parts ready to go, I'm going to do the assembling. So first I'm going to add some foam squares on top of the face. And I'm going to stick the wings. And take good care on how you stick the wings. They are not symmetrical. I had to flip them over because I made a mistake at the first time. And now I'm going to add some double-sided tape on top of that acetate. So that I can stick the head on top. And this way I am creating my very own focal point, which is really dimensional. And it's going to be super pretty and adorable. And I just love how those acetate wings add that extra something on here. And they shine when they catch the light. And since I'm going for a birthday card, I will be using this die by Penny Black that says Happy Birthday. And I really love the font. Now I want to add some glitter on my sentiment and that's why I'm going to create my very own glitter paper. So I'm adding some double-sided tape on this piece of white cardstock. I'm also going to use my bone folder to go over that tape just to make sure that everything is nicely stuck. I'm going to use my scissors to cut out a piece that fits my die. And now I'm going to bring in my big shot machine so that I can run it through. Now, just because this is a very thick cardstock that I'm using and I have already added that double-sided tape on top, it's quite thick. So I'm going to run it a couple of times just to make sure that everything is cut out all the way through. Now I'm going to peel off the backing and all the adhesive is now exposed so I can apply my glitter. The glitter that I'm using is Fine Glitter by Nouveau. It sticks nicely on top of my adhesive and it's not going to move. Of course, I am going to burnish it with my bone folder just to make sure that everything is nicely stuck there. Now I am going to work on my panel and this is a white piece of cardstock that I have cut out by using a stitched rectangle die. So that piece has a beautiful stitching all around. Now I want to apply some ink and create my sky on this panel but just because I want to have a very thin border all around I am making sure that I apply some masking tape just outside the stitching lines. So now I'm going to color my sky and just because I want it to be very pale blue I decided to work with Tumbled Glass and that's a distressed ink that I am applying with my blending tool. Notice how I'm not trying to get a very even coverage on my background. I just want to have some ink here and there which is going to help on the sky look and at the same time I get some areas that are lighter that will look like clouds from far away. So now I'm going to decide where everything is going to go. First I'm going to stick my Happy Birthday die cut and I'm using a matte medium that I have in this fine tip applicator and now I can place that at the very bottom of my panel. I'm going to press it down and just place a stamping block on top to keep it in place until it's nicely stuck. I'm going to place some foam squares at the back of my little baby girl and I'm going to stick her on the sky after all she has wings and she can fly and I'm also going to place some of those clouds all around here to complete my little scene. Now I'm making this card and I'm going to give it to a very special little girl. I am her godmother and she has her birthday on Thursday and along with her birthday present she always gets one birthday card from me as well. And as I am sticking my clouds on my little scene just to let you know that Penny Black is having a giveaway so make sure to visit my blog and find out all about it. If you are watching on YouTube you will find a link to that post down below in the description area. So now I am going to stick down my last cloud and with my scissors I'm going to cut off all the excess. I'm not going to cut off the wings or anything that comes out of the little girl. I'm just going to cut off the clouds. Now this is a small panel. It is way smaller than a standard card so it doesn't matter if anything from that baby girl sticks out. I'm going to apply some foam tape at the back of my panel and then I'm going to stick it directly on top of my card base but the way my card base is a standard card that's 4 ¼ x 5½ and I have created it out of pale pink cardstock. Now the card is ready. I'm just going to add some finishing touches So this is a set of glitter gel pens. I am adding some shine on her eyes and I know that you can't really see what I am doing and what that shine adds but it really makes a difference in real life. I'm also adding some dots of pink glitter on her tutu and this is going to finish off my card. And that was the card for today. I hope you had fun and got inspired and if you did don't forget to leave me a comment as well as give me thumbs up on my youtube channel. Here are some close up photos of the card that I made today. Don't forget to visit me tomorrow for another card featuring Penny Black. And if you need more inspiration here are two more videos that I have created a while back. Thank you all for watching.