 Hey guys, Shaber1000 here. We're going to do some more work on the boat today. Got a whole bunch of stuff here. I got some lights. I've got some switches here, some rocker switches. They light up too. So I'm going to put some navigational lights on. I'm going to put some headlights on it. We're going to put some decorative inside lights. It's hot out here so I may just time lapse you once I get started. It's 89 degrees with a real feel of 102. So let's get started. Hey guys, I'm back in the shade. Now these are going to be our headlights. I have four of them. I'm only going to put two on. I think the other two, I'm not sure if I'm going to put one back by the motor in case we have problems at night. Because it's no wake at night anyway. You're pretty much going to be idling. Or if I'm going to put two of these underneath the back bumper of the truck for backup lights. But this is what we got here. They kind of have an old school look to them. Which is what I was looking for. They're LEDs. There's what? Two, four, six, eight, nine LEDs in them. It's got a mounting hardware, even a bolt for the mount. It has, let's say, it's got the specifications here. So what we're going to do, I'll take you up here and I'll show you how I'm going to put them. And then you'll get an idea. Well you'll see it lit up after night anyway. It's so damn hot out here. Sometimes when it's 89 and 102 real feel is worse than 95 with a real feel of 100, you know. So I'm going to put one here and I'm going to put one over here. Okay. Now I also got my navigation lights that are going to stick here. We're going to have red over here and green here. And then the blue lights are going to go, I'm going to put one up here and one over there. And two, one side by side on each of the seats. So that should light up blue. Also what we're going to do, we're going to put blue indoor-outdoor carpet like you see on pontoon boats. We're going to do that. But I think these will look pretty good right about, a little right in here. The only thing I don't like is the rope there. So we just have to be careful that we don't knock the headlights off with the rope. But, you know, I could put them out here maybe. Yeah, I could put them there. But I'd rather put just one here and they're adjustable. I can, you know, adjust them and one here. So I can't see nothing. I got my eyes closed because of the sun. Sweats going in my eyes. I'm going to run the wires back along this rail back to about where I'm sitting. Right in here somewhere. I've got some rocker switches up here. I'm not sure how I'm going to put them on yet. One of them is missing the this case around it. So I may have to come up with something different for those. See, this one's never been used because it's still got the screws with it. It comes with the screws. I'd like to put them somewhere like that maybe because the battery is right underneath the seat. Maybe right in here. Something like that. I'm not sure about that. But right now I've got to get it wired. And once I get I've got the old wire from the boat trailer. I got most of it up here. So I'm going to use that to run down along the sides. I have checked it. This wire is okay. I did have, see this is actually brown. But I did have one that didn't show continuity. So I got three of them there. And I've got some more wire if I need it. So alright guys, I'm going to have to drill some holes and stuff. So these navigational lights where did I put them right here. All they do is stick on. And I've noticed these things, these ones actually they're calling for to be on a Triton bass tracker. But it's just a freaking light and put it on anything. And they'll, you peel that back off and you stick it on. But I found over time they will start peeling out. So just be prepared for that and keep you some glue. Not glue. You don't want to glue them on. Some what you call it clear silicone sealant. And you'll be alright. So right now I'm going to I'm going to go ahead and start wiring this thing. And I'll show you what I did once I get done. And well I'll show you. Because this is not really how to. I'll show you once I get the lights mounted. And then I'll show you once I get the wires run. You know that kind of thing. I had the camera out here a little bit ago. And I turned it on and did a time lapse. And the screen was black. Like this. So I don't know what that was all about. So what I did was I had to pull the battery and stick it back in. So if I'm going to have problems I'm going to send this thing back in areas that are going to fix it or give me a new one. So anyway let me get some holes drilled. And I'll show you what we come up with. Okay guys so we got these lights mounted. Of course these wires are not going to be like this. This is just for testing purposes. They're going to be run up under here. And here we go. The red and green nav. Oh I thought I had them on them. The red and green nav lights. These lights are going to flip them down when I put the cover on it. I'll have to tighten it up some more but you get the idea. So there's the nav lights. So yeah they should be alright. Like I said these are going to be on their own switch. These are going to be on their own switch. Then the inside ones. Which I'll get next. I haven't ran these wires yet because I'm going to be running more wires. And the lights we're going to have inside of here. I said I'm going to put two there. Two there. Two there. Probably two up here. And then I'll have two more. I got ten of them. Which I'll probably put in dead center. I don't know. I'm not sure yet. We'll just see how I'll aid them light it up. I think I'm going to put one up in here and one up there. And then down in across the front of the seats there. So alright I've got a memory card blinking. So anyway that's how I mounted them. Like I said these wires are going to be hidden. They're not going to be run over there like that. So just wanted to test them. I did put a little contact cement there on the edge. Throw on the end of it there to help hold that. So monkey's messaging me. My phone got too hot. I don't know if the camera can pick that up. And it cracked. So hopefully it's just the screen protector. But we'll see. Alright guys I'll be back with you. Let me get another card. Or make some room on this card. And let me get the blue lights up in here. And I'll try to get them wired. I think what I'm going to do is I think I'm going to put the switches here. Let me see. They won't mount like that. I could probably use my dremel. Let's grab this thing. And cut some square holes out. And mount these right in there. Three of them. Because I can't mount them up here as you can see. The seat will knock them off. So I don't know I might be able to see they're on an angle. Well I can mount them like that. At least the two. Until I get another. They sell just these cases for these or whatever you want to call them. I could just mount them like that. I'd rather have them inside there. That would be cool. But I think I will just go ahead and mount them like this. And I think they'll be there either way. I don't put much in here. I just have to be careful you know. So I don't knock them off. And then all I'm going to need is one main wire. Which I'll run along here. And then down. And through that. Through that hole there. Alright guys so. And I'll be back with you. Okay guys. I'm back. I got all the lights ran. And hooked up. But I don't have a switch that's hooked up yet. And I got to finish tucking the wires up. Make them nice and neat huh. Yeah. But I'll show you what we came up with. Now these headlights are going to be on their own switch. So they're not going to be run all the time. They probably pretty much just when we're on the river. Alright and so. There's that. And here's the inside. Got them up under the bow. So we've got two. Four. Six. Eight. And also ten. Back there. So I think looks pretty nice. Look at that new camera. That is cool. I like that. I just want to shut the headlights out. So. If you hold this for a second. It's recording. Okay. Go slow. Go slow. So what I'm going to do. Is I'm going to unhook the headlights. Okay so there we go. Turn the headlights off. I just got them wired onto the battery. Just so you guys can see. There's our nav lights. Green and red. And then we got. Blue lights in there. Back here in the back. Right there. That's our stern light. I like to have them a little higher than that. But that one came with the boat. And it's battery powered. It's got its own battery. So I don't have to wire it. So that'll be fine. I could probably maybe take this off here and raise it up. I like to have it up a little higher. But that's okay. I can actually probably put it on top of that if I wanted to. But oh that looks good. I'm going to shut this off. But the only lights you have to have that are a requirement is that stern light back there. And the red and green ones. You don't have to have headlights. I just put them on there for our safety. For when we're river riding. Like a night like tonight. Out on a lake. On a moon and a clear night. We wouldn't need the headlights anyway. So I think that looks pretty cool. But now what I gotta do is get my switches run. Of course. Button these wires up. Make them look nice. And that's going to look good. Once we get the blue carpet in it. I think. What do you think mama? That'll look really pretty. Yeah. Nice. But the nav lights the head lights and these lights are all going to be on three different switches. So I can run any of them I want. At one single time. That'll look good when we go. Go in the dock. Somewhere and eat. And we can leave the inside ones on. Got the drill in the way. This one back here. So yeah. There's what we ended up with. We'll finish it up tomorrow. And I guess we're going to take it out. Huh monkey? Yeah. We're going to do some night riding tomorrow night. So what do you guys think? Pretty cool huh? Pretty cool month? Yeah. I like it. Yeah. Me too. All right. There you go. So. That being said. Monkey. There's monkey. Yep. Can't hardly see us. Nope. But anyway. There we go. Ooh. Well I do have. I forgot. I keep forgetting. You have a night vision. There. We've got night vision now. Yeah. All right. So guys. What do you say Monk? Cool. I like it. I'm happy. You happy? Yep. Okay. Well. Monk. Tomorrow. Okay. Well. Shea bearer the myth man alleged I'm gone. Monkey. Monkey says stuff now. Bye y'all. Bye guys. Take care. Have a great weekend. And we'll chat soon. See ya.