 Hello and welcome to this explainer video on how to get started with the STM32 Nucleo motion and environmental sensors expansion board using the ARM embed environment. We are going to explain how to get your application running in the ARM embed environment. The first half of the video will focus on the software setup and the second half will detail the hardware functionality available. Connect the STM32 Nucleo board to a PC using a mini USB cable. The board is automatically detected and seen as a disk drive. Now connect to the ARM developer dot embed dot org website and log in with your credentials. Click on hardware, then components and select environmental under the sensors category. Click on XNucleo IKS 01A2 motion MEMS and environmental and find the Hello World IKS 01A2 and then import it into the online compiler. Open the main program and choose the desired target platform. Add a new one if needed. At this point build the application and download it on the STM32 Nucleo board. Once downloaded the application will reset and start. You can also reset the board by pressing the black button as shown. This simple application shows how to get environmental data like humidity, temperature and pressure. It also displays the inertial data from the accelerometer, magnetometer and gyroscope. Information on how to obtain the board can be found on www.st.com.x-nucleo under the reference XNucleo IKS 01A2. This board includes a variety of MEMS based components. An inertial module composed of a 3D MEMS accelerator and a 3D MEMS gyroscope. A MEMS based combination 3D accelerometer and 3D magnetometer. And a MEMS pressure sensor and a relative humidity and temperature sensor. Thanks for watching this video. For more information on all of our expansion boards please visit www.st.com.x-nucleo.