 Hello everyone today, we're going to be putting together this awning So let's get this put together to give you everything you need in this awning all the parts pieces It's a hardware to put it together and hang it and a very easy to read and understand instructions here tells you everything that you have With it and everything you're going to need you're going to need a drill tape measure a pencil and a level These have a protective coating on each side to keep it from being scratched up That's how they're going to go together Now as you can see all these do is slide in Same way with these they slide in This one's a little bit tighter. So be mindful of that. They just slide right in there like that And that's what it's going to look like with the first piece now We're going to put some screws in the longer screws will go in here There's four of them. They will go into the end and Tie the plastic to the aluminum and that's what it should look like when you're done Now once you have that together You're going to take the short one has a little drill bit on the end of it That's a self-tapping screw and you're going to put on the inside hole on each side Now what I like to do is I like to get them started in there and then I tighten With the regular screwdriver, so I don't over tighten. That's all it takes. I'm going to do the other side And this is what it should look like once you have it assembled Very nice very easy. And there's what it looks like finished up I do have an overhang here already, but we're going to be getting a new roof on so that will not be there But this will be This is plastic and aluminum so will not rust and the bolts are coated zinc coated so they are rust resistant You can get this in different colors and you can get them in different widths for double windows double doors Very nice product