 Please command Matthew here with AOA and Milgram to give us a brief description on how we're going to safely stow our weapons elevator doing full ship shock trials. Thanks CMC. So whenever we take these blasts from shock trials we're going to put these elevators in stows. These stow pins will be extended into the platform. Since this is upper three it will stow in the O3. In order to get to the stow position we're going to go out to the HMI. The HMI is the human machine interface is where you can control all your commands. You push stow on that HMI it'll send a communication to these wires to the communication switch and it'll extend the stow pin. It'll go up to the O3 wherever it's at since we're on the O2 on upper three it'll actually dispatch it to O3 and then stow from there so you don't have to stow send to O3 and then stow it so it'll secure it to the trunk therefore making it more stable more secure for shock trials where it won't fall through the trunk whenever we do take a blast. Alright that's some good stuff. So with these stow pins I guess we actually use these at other times also correct? Correct. Any evolution we have with ordnance we either unstow or stow them whenever we're done we'll ensure that all the weight's off the platform so stow pins won't get damaged through excessive weight on the platform. Alright good stuff. So here in that brief it lets me know that we're going to be very prepared for full ship shock trials. Thank you ALEM Milgram. Thank you CMC.