 Shaber 1000 here today. We're going to be working on these drums getting them cleaned up. I've got a couple wires to fix I Guess that's mainly the video itself. So stick around. Let's get these cleaned up. Let's get the wires fixed first Okay guys, so this is what we got here. We have a couple wires that have been ripped out. I'm gonna show you how I'm gonna fix these first I'm gonna cut these off Cut the ends of them off here This one, I think it's gonna be all right It's still got the wires out of it here. I'm gonna fix it a couple of these What these do they run over to the other side of the drum set? so Of course, you know, they're unhooked and they're short so I'm gonna put this on here and I got a couple Extension cables for these That will go over and plug in where it needs to be plugged into so this First of all take this off And you take that off We're gonna stick this on here I'm gonna twist these together real good. We're gonna solder these on And I'm gonna solder the red one up here And the white one down here on the bottom. So get you zoomed in here a little bit Hopefully my Yeah, it's heating up Hey So first we're gonna do the top one Well, let's do the bottom one that way we have more room. I'm gonna stick it. There's a little hole here little hole there I'm gonna put this wire in through this little hole. I'm gonna bring it up through just like that Now I don't have any way to hold this so hopefully this will work. Can you see that? All right? There's a wheel. There's a way, right? See a lob Hopefully you can get the idea way up this wire wherever it's bare and that'll keep it from Unraveling I guess I need to get me a new a New soldering iron because I want one of the ones that you set it and that's where it stays at This one kicks on and off Okay, so just like that. I'm gonna do the same thing with the top one this one I think Think I'm gonna go up through that way. There's less of a chance of them touching each other And just like that. I'm just gonna fold it over and the same thing. We'll solder it right to that It's like that there now. That's done now. I got a stand for this thing somewhere All right Now what we're gonna do I'm gonna spread these open. I'm gonna put the wire in I should probably should have put it through first but put the Cable in just like this Okay, and I'm gonna crimp them around That's that keeps the the cable from pulling out These are just the cheap things. I mean But it's it's a quick and easy fix Just like that. This folds over Plastic goes up on there. I don't know if that's heat shrink or not Never seen this stuff on here before. No, it's not. Okay. It's just a protective Cover put her top piece on there's the first one Won't pull out and then like I said, I'll show you I've got a jumper cable that'll plug into this and plug into the other side I'm gonna go ahead and do the other side since you've seen me do this one and then Then I'll show you how I'm gonna run that over to the other side of the drum set. Okay guys, so These are the pieces I thought I was gonna need But I didn't so there's plenty of room to run these wires. I Thought I was gonna need it to go there, but I didn't so Turns out it's Pretty decent He's cleaned up a little bit. I did wipe it down some But you know there's You know, I'm not gonna get all get all inside there. I mean they can do that, but it does look nice It is presentable. Yeah, it does all Different kinds of stuff. So there's knobs on the side of these tom-toms Just sensitivity There you go We've got something done today Man, I did clean the cymbals and the tom-toms. I did clean them up real good the kick drum and The pedals I did clean them up good This is in really good shape. It's never been awesome I'm just gonna leave that on there for the next person because these are going up for sale. So Yeah Anyway There's the drum set working good Looking decent. Yeah He's a little bit of cleaning, but you know, I can't spend, you know, 12 hours on something That I'm gonna sell, you know, so there it is You're here in Florida and interested. Let me know All right guys, she bears met the man legend gone for now I hope you guys are having a good week. We'll see you soon. Bye. Bye and take care