 Hello, today I will show you how to achieve a long-range connectivity with ST12P on SiegFox network. So, I am Victor Royan, part of the STEME RF application support team based in Rennes, in France. First, I will show you what I need to complete my demonstration. We will need our ST12P immigration board named STEVAL-FKY868B2. ST12P is an RF transceiver state-of-the-art in terms of power consumption and RF performances. On the other side, we need a BlueEnergy-2 evaluation board named STEVAL-YDB-008B2. It contains, of course, a BlueEnergy-2 chip set to add BLE connectivity to your application, but also some environmental sensors. So, adding BLE connectivity to your SiegFox application means that you can run both simultaneously the BLE stack and the SiegFox stack. You have to know that SiegFox stack is also available for different STM32 family. At the end of this demonstration, I will show you that you can easily push a data from SiegFox to a specific dashboard. Here, we will use the ST dashboard, named Dashboard Asset Tracking Solution. When using it, we can retrieve plots on environmental sensors, but also map geolocalization. So, before completing the full demonstration, let's talk a bit about SiegFox. SiegFox is a global LP1, low-power wide-area network. Actually, ST do provide scalable silicon solutions to operate on SiegFox network. With S12P, for instance, you will be able to send a 12 bytes message to the SiegFox base station. SiegFox is also providing a geolocalization feature. Using triangulation system, it permits to track and detect the localization of your device. The SiegFox geolocalization accuracy is under 1 km in town and under 10 km in rural zone. Of course, everything depends on the SiegFox coverage. As you may know, SiegFox is divided in different RC zones to match local radio regulations. For instance, to communicate in Europe, you will need to match the RC1 radio regulation and to communicate in the United States, for instance, you will need to match the RC2 radio regulation. Hopefully, S12P is SiegFox certified for all RC zones and S12P is also certified for Monarch feature. Monarch feature is a SiegFox service that lets the device automatically support worldwide mobility. Monarch feature is based on gateway become signals to identify RC zones. Then a Monarch device will adapt itself to the right radio regulation zone. So now let's complete the full demonstration. As you can see, we have a BLMesh network composed of 3 BLMesh2 evaluation boards and of one gateway based on BLMesh2 and S12P. Using the STBLMesh app phone, we can toggle the blue LED of each device connected to this mesh network. The gateway, those run simultaneously both mesh and SiegFox stack. When doing a specific external event, for instance pushing the button, it will send a 12 bytes message on SiegFox network. This message contains emulated sensors value as temperature, pressure and humidity. I have preconfigured my SiegFox backend following the instructions available on ST dashboard asset tracking. So now SiegFox is pushing each data to the ST dashboard. Then I will be able to retrieve my data on the cloud using plots and maps to display my device information. You must know that ST do provide a full and complete ecosystem for asset tracking. First, you can run your tracking application based on STM32 series or Blue Energy family. Regarding SiegFox connectivity, S12P is a must have and you can directly match your antenna with an ST balloon. You can also improve the SiegFox positioning system by adding the TZO GPS module from ST. Regarding battery management, you can use the DC-DC converter ST1 PS01. You can also add a secure element STSafe to secure some specific data or even SiegFox credentials. At the end, you will need motion and environmental sensors to track your device as temperature or humidity if you are tracking sensitive assets as food. Precious sensors that can detect land-on or take-off procedure or even accelerometer to analyze any specific movement. So now I believe that you can start your own asset tracking application. Just one information you need to know is that ST has developed a function pack for asset tracking for SiegFox. It permits to track your assets with whole ST ecosystem. It contains all the drivers for S12P, Bluetooth, GPS, motion and environmental sensors. To conclude this video, you can also extend your own application with PLC technology. Then using G3 hybrid technology will permit you to switch from PLC to RF or to RF to PLC for a stronger communication. Actually, an hybrid demo is already working. You can find a full demonstration video in resources of this exhibition. I hope now it is clearer for you on how to achieve a long-range connectivity with the S12P and SiegFox network. Do not hesitate to check the G3 hybrid demonstration. The video is in resources and available. Otherwise, goodbye and thank you.