Loading...

Podcast Audio Only- Episode 25: All About the FlowVis Flow Meter, Interview with Paul Hackett H2Flow

198 views

Loading...

Loading...

Transcript

The interactive transcript could not be loaded.

Loading...

Loading...

Rating is available when the video has been rented.
This feature is not available right now. Please try again later.
Published on Jan 4, 2018

The FlowVis Flow Meter is a revolutionary flow meter for your swimming pool. A flow meter is a device used to measure the amount of water passing through your pools filtration system, usually measured in Gallons Per Minute GPM) here in the US and Liters Per Minute (LPM) in other parts of the world. Knowing you pool's exact flow rate is important if you want to maximize your energy savings and set your pool to run less each day.

Basically you need to get one cycle of water through your pool's filtration system each day. This is all of the water in the pool passing through the pool filter and then back out into the pool again. This will ensure that any bacteria or viruses are filtered out and this also makes sure the pool water stays clear and balanced. Running your pool less than one cycle per day could mean cloudy water and possibly unsafe swimming conditions. Running your pool longer than needed will result in wasted energy and a higher electric bill every month. So setting your pool to run just one cycle each day is optimal. Without a flow meter you are just guessing and estimating your pool's run time. With a flow meter you will get an exact number which in turn will allow you to save money each month and have a safe to swim pool everyday.

The FlowVis Flow Meter is an ideal product if you have a variable speed pump and want to maximize your energy savings. The FlowVis will give you the exact flow rate of your pool water so that you can set your Variable Speed Pump (VS Pump) RPM to the desired run time to get one cycle of water through your filter and back into your pool each day. Because the different RPM settings will allow more or less water to flow through the filter depending on the setting, it is really very difficult to just estimate the amount of flow at each RPM accurately. So the FlowVis Flow Meter will take the guess work out of setting your VS Pump.

The FlowVis is fairly easy to install and does not require any particular length of straight pipe in front or behind it. It can be installed anywhere on your equipment plumbing except directly in front of an In-Line 3” Tablet Chlorinator. So finding the perfect spot for the FlowVis on your pool equipment is very easy – you can pretty much install it wherever you have the space. They also sell a Retro-Fit kit that will screw right in the where your existing Jandy, Hayward or Praher Check Valve sits. Simply remove the screws and the Check Valve face and insert the FlowVis Retro-Fit right into that spot. It couldn't be easier and the FlowVis will act in the exact same way as the Check Valve you removed. It is designed as dual purpose product, it checks the pool flow and will close just like a Check Valve when the pool turns off.

Key Features
Installation flexibility; installs horizontally, vertically, or even upside-down
Can be installed right next to other plumbing fittings such as elbows with no effect on accuracy
≥97.9% across the entire model range
NSF 50 Level 1 for eight different FlowVis® models
Doubles as a check valve (1.5", 2", 2.5" models)
Clear, easy-to-read scale in GPM or optional LPM with key velocity points (FPS)
Installs quickly and easily with no calibration required
Manufactured in the USA
15-year design life, 3-year warranty
Models available for Metric pipe sizes from DN40 to DN100
The industry's most respected and reliable flow meter

Learn More: https://www.swimmingpoollearning.com/...

To see other videos on the FlowVis Flow Meter:
FlowVis® Flow Meter - H2flow Review & Overview: http://youtu.be/8WFXje-NWBY
FlowVis® Flow Meter Retrofit Kit Installation Guide: http://youtu.be/hsH2I06G_-A
FlowVis® Flow Meter - Plumbing in the Complete Valve: http://youtu.be/3cvUP6n3xvQ
FlowVis Flow Meter to Set Your Pool Pump Run Time: http://youtu.be/aE1Pc6GisUw
How to Install a Pentair SUPERFLO® VS Pump: Plumbing in the Pump: https://youtu.be/Pb1OTS0nYMg
Pentair SUPERFLO® VS Variable Speed Pump Operating and Programming: https://youtu.be/JzDw3abs6O8
Variable Speed Pump RPM, Watts and Run Time EXAMPLES: Featuring Jandy iQPUMP01: https://youtu.be/DlOjwUgv_Yk

Visit my Website: http://www.swimmingpoollearning.com/

eBook: https://www.swimmingpoollearning.com/...

YouTube Video Index: http://poolmandave.blogspot.com/2014/... – A list of all of my videos:

Follow Me:
Google +: https://plus.google.com/+MrDgvb1/posts
Blogger: http://poolmandave.blogspot.com/
Facebook: https://www.facebook.com/pages/Youtub...
Twitter: https://twitter.com/Mrdgvb1
Join me on Patreon: https://www.patreon.com/user?u=4251655
Podcast: http://www.buzzsprout.com/110832
Shop INYOPools: www.inyopools.com?utm_source=youtube&utm_medium=swimming-pool-tips

  • Category

  • License

    • Standard YouTube License

Loading...

Advertisement

to add this to Watch Later

Add to

Loading playlists...