 Hey everyone, Drew with GeoArm and I am back to talk to you about changing the exit delay on your GeoAlarm control panel and the exit delay is the timer that your panel gives you to allow you to exit out of the home before or the business or the building, whatever it is that it's monitoring, before it is fully armed. So we'll go ahead and we'll hit the hamburger icon, enter your 4 digit code, you're going to go ahead and hit the arming button here, okay. Now you can choose either mode here, staying or leaving, I'll go ahead and just do it for staying right now. It'll still give you an exit delay if you choose. So if you have company over something and you want to give a little bit of a timer for people to get out, then you would just set it for maybe a 15 second or 30 second exit delay. Typically in a stay mode you probably don't want an exit delay. So I'll go ahead and go back, we'll go to leaving now. As you can see for leaving our exit delay is set to a full minute. You can adjust that up, it looks like 120 seconds is the max here, okay, and we can go all the way back down, all right, and make that to 45 seconds for the minimum, all right. So I'll leave it at 60, but that ladies and gentlemen is how you change the exit delay in staying and leaving modes on your GeoAlarm control panel. If you have any questions or comments, please leave them below. Take care, have a great day. Please like and subscribe to our page for helpful programming and installation videos, product reviews, monitoring, products, and more. Visit www.geoarm.com or call 877-443-6276 that's www.geoarm.com or 877-443-6276 Geoarm. The worldwide leader in DIY security.