 Today we'll be installing the two gig stove and grill guard here on this stove So a couple of things to know before we get started. Of course, you want to make sure your stove is in the opposition all of these are We also want to make sure that when you're installing these You want to have a flat surface if there are screws on your grill or stove, right? You want to make sure to align them here and we also want to make sure we've got four tenths of an inch of clearance on this Stem here. So here we've got about half an inch. So that's perfect. We also need to decide Which is the appropriate sleeve to use here? So we've got the malleable sleeve So it's what kind of flexes and stretches around your stem. We won't be using that one today We'll be using this hard plastic sleeve. So notice here one side is kind of flat This is the side that's going to go face down onto our stem. So this can only go on one way I'll install it here Push it down The idea is that this magnet here on the sleeve Should align with these three notches. This is the re-switch So when in the off position that magnet should line up with these this re-switch So I'll install it perfect. It lines up and we'll just simply reinstall our knob. So when we open this The magnet will move from its re-switch and send us to signal to the turkey panel saying that it's in the open position Make sure to subscribe to our YouTube page and click the show more tab underneath the video Where you can view valuable links pertaining to this product similar how-to videos and our low-cost no-contract alarm monitoring services