 Hey everyone, Drew with Geowarm and I am back to talk to you about the L5210 and L7000 panels and how to figure out if they are the proper revision to use the LTE cellular communicator or whether or not you're going to need to do the MSD update, which I also will include a link to or a direct link to at the end of this video, so you can watch that as well. Alright, so the first thing that I want to get into here is I want to go ahead and talk about the L5200, the 5200 which is here. This panel can be updated to the L5210 Rev9 with the MSD update tool. That's the whole reason why I put this in this video. I just want you guys to know that have the 5200 that there is a solution for you. So the MSD update tool will also update this old 5200 and take it to a 520 Rev9. Once again, I'm going to go ahead and include a link to that video at the end of this video. So if you have the 5200, you can go ahead and fast forward to the end of this video and then click that link that I'm talking about that will bring you directly to the video you're going to need to watch. Now I'm going to go ahead and put this 5200 over to the side here. What we're going to be doing here first is we'll grab the 5200. What we're going to do is we're going to check for the panel revision. So you're going to hit security, you're going to hit more, then you're going to hit tools. You'll enter your installer code, which mine is the factory of 4112. Once you get into the programming, all you should have to do is hit test. Now at the very bottom, it should say Rev and then it'll have a colon and then the actual Rev. As you can see on this one, it is a Rev9 panel. So this 52110 is good to go. It's ready for the new LTE cellular communicator. So if you have the L52110, your portion of the video is done and you've determined at this point whether or not you have the proper revision. If you do not, once again, wait for the end of this video. That link will pop up so you can watch the video to get this updated. All right, I'm going to go ahead and move this over to the side as well now. Now we'll be working on the 7000 panel. The 7000 operates a little similar. So we'll just hit on the main screen, we'll hit security, then we'll go more, then we'll go tools. Then you'll enter 4112. Go ahead and hit test. At the bottom, it should tell you the revision. As you can see, my panel Rev is not high enough. It's a Rev7. So I would need to MSD update this using the tool in order to flash it into the Rev9, which is the proper firmware revision. And as I said, at the end of this video, you will see the video that will show you how to do this. So we've determined how to check for panel Rev on both the L52110 and the L7000. And you L5200 people out there, you know what you need to do as well with the MSD update tool to get it to 52110. If you guys have any questions or any comments or you need any help with anything at all, please leave a comment below or give us a call here at GeoWarm. Other than that, you guys take care and have a great day. Make sure to subscribe to our YouTube page and click the Show More tab underneath the video where you can view valuable links pertaining to this product, similar how-to videos and our low-cost, no-contract alarm monitoring services.