 Ευχαριστώ και ευχαριστώ για ένα άλλο CREATE8. Σήμερα θα δημιουργήσω 8 καρδιά που χρησιμοποιούνται από το τελευταίο εργασμό by my favorite things και υπάρχει ένα βίντεο που εγγραφίζω την καρδιά που μπορείς να βρείτε αν χρησιμοποιείτε το i-icon. Φυσικά θα βρεις ένα βίντεο στο τελευταίο της βίντεο. Λοιπόν, εγγραφήσω με την πρώτη καρδιά και θα χρησιμοποιήσω το στάμψε που είναι called Martini Time. Έχω στάμψει το στάμψε που χρησιμοποιείται Martini Time σε 3 δυο χρώματα και θα στάμψω ένα λίγο λεμό όπως και ολίφ. Λοιπόν θα χρησιμοποιήσω το στάμψε που χρησιμοποιείται όλα. Και θα μπορώ να μεταφέρω το καρδιά μου. Έχω αυτό το στραπίδι, το βασικό και το κομμάτι. Και θα αφήνω στον πάνελο βασικό. Και θα αφήνω στον πάνελο όλα τα στάμψε. Θα θα αφήνω στον πάνελο, μόνος δυο δυο παράφευμα για να δι grenou. Έχω φκρήσει μείνει και να τέλειξω όλα τα στάμψε. Έχω χρησιμοποιείται φόμα σκουρές στο στάμψι για να βρουν και εξαρήσω ένας βασικός. Θα στάχ pursued τα γλυσκά μελικά όλα τα στάμψε. Μέχουμε ένα λίγο λίγο λίγο λίγο και ένα άλλο λίγο λίγο λίγο λίγο λίγο. ίδιο στον πάνελοή Martini time υπάρχουν ένα βινό τρήγου κι για αυτό το καρδιά Αυτή η καρδιά που ήθελα να πάω με ένα που λέει 1 Μαρτίνη, 2 Μαρτίνη, 3 Μαρτίνη Φλόρ. Νομίζω ότι αυτό είναι πολύ χιλάριο και είναι πολύ καλύτερο να κάνει ένα καρδί. Θα σκοτήσω αυτό με μπλακόνι και θα τελειώσω το καρδί μου, by adding some dots with my clear nuvo drops. Και αυτό έκανε την πρώτη καρδί. Εδώ είναι ένα κλόζα πλούκ και κάποτα φωτος. Για την επόμενη καρδί μου θα δουλεύω με ένα στενσί, από ένα προσπαθόνι, από τα τελευταία μου. Αυτό είναι ένα κλόζα πλούκ, νομίζω. Και θα σκοτήσω με ένα καρδί μου, χρησιμοποιώντας τα στενσί αξιότητα. Λόγω γιατί θέλω να έχω ένα στενό λογ, και δεν θέλω να αυτοσχατήσω το καρδί μου. Θα χρησιμοποιήσω τα μπλακόνι μου, που είναι αυσιασμένοι, by the way, θα βρεις λίγες κάτω πίσω. Θα δουλεύω με τρεις διαφορές κόλες και μπορείς να δείξεις τα κόλες στον σχέδιο στις ειδικά. Και όπως μπορείς να δείξεις, έχω μόνο ένα στενό λογ για κάθε οικονομική στενό λογ. Δεν χρησιμοποιήσω τρεις διαφορές κόλες, διαφορετικές σχέδες αξιότητας, etc. Λόγω 7 στενόλες, είναι πολύ περισσότερο. Και εδώ είναι το καλύτερο βαγγράμμα μου. Θα αυτοσχατήσω αυτή την κόλες της κόλας. Αυτό λόγω πολύ σκέδιο και σαμερή. Λοιπόν, θα αυτοσχατήσω τα κόλες απ' να κάνω μιλό της σχέδιος από την καλύτερη αξιότητα. Και θα αυτοσχατήσω το σχέδιο λογ. Αυτό είναι τραγή στις αξιότητας που αυτοσχατήσει αυτή τη σχέδια και όπως το inside. Και έγιναν με αυτές ταιχεία, ταιχεία πλαστικά που βρεινάει εκεί στον σχέδιο, που κάνει το καλύτερο ελαιμπέρας για να αφήσει τη σχέδια σου στο inside. Θέλω να αυτά είναι πολύ χαρακιά. και υπάρχει also a martini glass, αν θέλεις να χρησιμοποιήσεις αυτό ειδικά από το margarita. Και όμως η σχέση μου είναι έτοιμη να πάω. Θα πρώτα θα χρησιμοποιήσω κάποια σχέση από τη σχέση μου, οπότε για αυτό χρησιμοποιήσω ένα σχέση σπίτι λεμονή, που είναι πραγματικά ένας από τα σχέση που χρησιμοποιήσω για τη σχέση. Επίσης, δεν είμαι υποστηριασμένη κάτι, θα απλωθήσω ένα λίγο της σχέσης και αυτό είναι πολύ εύκολο να κάνει με τα σχέσης γιατί δεν υπάρχει πολλά χώρια. Και εδώ είναι ένας άλλος εύκολο πρόγραμμα που έχει ήρθει από το MFT. Αυτές είναι λίγο πλαστικές κουμπές, οι είναι ευκολασμένοι as you can see και they look exactly like ash cubes. Λοιπόν, έχω χρησιμοποιήσει αυτά τα σχέση μου, τώρα θα σχέσης τα σχέση. Θα χρησιμοποιήσω κάποια σχέση λεμονή, δεν θα χρησιμοποιήσω τα σχέση. Θα χρησιμοποιήσω ένα σχέση σπίτι λεμονή για να δημιουργήσει αυτά τα σχέση. Τώρα, έχω χρησιμοποιήσει κάποια σχέση λεμονή σχέση για να χρησιμοποιήσω τα σχέση λεμονή. Αυτή είναι από ένα σχέση που έχει been released λίγο χρόνια από το MFT και έχω also cut out one more frame for my margarita glass από το ίδιο σχέση λεμονή. Και φυσικά μπορώ να έχω χρησιμοποιήσει το σχέση λεμονή σχέση όλου από το beginning για να χρησιμοποιήσω my margarita but i didn't thought of that at that point so i just cut it out and stick it on top at the end For the next card i'm using the hello little one stamp set this is perfect for sending wishes to a mum to be or to a newborn child i'm going to stamp a couple of images color them with my alcohol markers and then cut them out with the matching dies i also used the new scallops cross stitch tag to cut out this tag and you can also remove that cross stitching from the inside and cut it out as a simple tag i decided to leave it as it is because it creates a little really lovely background it's quite subtle but also adds some interest now i'm going to thread some silk ribbon and i'm going to tie that with blue flows i try to find the flows that matches the colors of my card and i'm going to stick this tag on top of a card base again i found a card base that matches the blue on my card so everything is nice and neat i'm going to finish it off by adding some white nouveau drops in different areas just randomly there because i'm addicted to those nouveau drops and my card is ready for the next card i'm using one of my favorite stamps every month the pure innocence collection little girls are definitely a favorite and i make a card every month with those i've stamped here and colored her with my alcohol markers and now i'm using one of the backgrounds that has just been released this is full of little dots and i'm going to add some of the dots only at the center of my panel i didn't want to cover it up completely i just wanted to have something at the back of my little girl now i looked through my stars to find a cardstock a red cardstock that matches the color of the red dress that i used for my little girl and i have cut out a frame which i'm going to stick directly on top of my panel and i have also used the new dye that writes a happy birthday when you cut it out and i will use all those little letters to write my message and to make my life easy i'm using the negative space so that i can place everything nicely and neatly on top of my card i'm adding my glue white glue at the back and then i'm going to add all those letters there now these are going to fit nicely inside and then you can peel off that mask and everything will be nice and straight i really love this little girl it's one of the best they came up with just because he's holding flowers it is so versatile and you can use it for so many different occasions i have added some foam tape at the back of my girl i'm going to stick here on top of my card really clean and simple design but so striking and i really love this girl now to finish it off i'm going to add some clear new all over the letters which is going to turn them dimensional and glossy now for the next card i'm using this glitter paper this is actually a new product by tonic studios and i'm going to add one of my frames along with the happy birthday die again this is really versatile i really love the font the size of it i think it's perfect for your birthday cards and it's a dye that you will be using again and again if you invest and buy it and to embellish my birthday card i decided to go with those new mini rolled roses these are in two sizes as you can see a smaller and a larger one i've cut out two of the small die and one from the larger one and now i'm going to wrap them all around the easiest way is to use your tweezers to hold the beginning start wrapping from the outside all the way towards the inside and when you reach the end use your hot glue gun use fabrik glue or glue dots like i'm using here to secure that bottom in place and remember the easiest way is to use your hot glue gun but i was too lazy to turn it on so i'm just using my glue dots and they worked just fine so here's my little flower i'm going to repeat the same process for the other two and i'm going to put everything together i'm using again glue dots again i told you i was too lazy to bring out my hot glue gun so i'm working with what i have on my table but again these glue dots do the trick they hold up really nicely they're very sticky and these flowers will never fall off the card now i've also used some dyes from a previous release to cut out those leaves as you can see that i have on my table and i used the same glitter cardstock as i did for my panel so they are nice and shiny i'm using my nuvo del lux white glue to stick those leaves around my flowers and embellish my panel and then once this is ready i'm going to stick it on top of a standard card that matches the color of my felt and again i'm using my white glue at the back to stick this panel on top now i haven't thrown all those inside pieces from the letters so now that my panel is in place i am going to take my time and stick all those little pieces inside the letters such as a b d etc of course you can leave the sentiment as it is you don't really need to bother to add all those little pieces since the sentiment is quite readable as it is and finally to finish off my card i am adding some white pearls that i had in my stash these are self-adhesive and they make the perfect center for my flowers moving on to the next card i'm going to stamp the elephant from the safari party stamp set and i'm going to pair this elephant with the balloon alphabet this comes with all the letters of the alphabet in capital as well as a couple of balloons that are empty they don't cut out letters inside as well as lots of little strings i'm going to cut out only two of those that read the word high and i like that the trunk of the elephant is lifted so i can tie those balloons as if he is holding them so anyway that was the main idea so here i am creating a panel and i'm using one of the cloud stencils that has been released previously i am turning my stencil around so that i can create different shapes and i'm using my distress ink of tumbled glass and as i go towards the bottom i apply less ink with less pressure so i end up having a lovely ombre look of clouds now i'm not going to use the whole width of this panel i just had to make it quite big so that it was manageable for me so i have cut it out to be even thinner and i am adding some foam tape at the back i have also marred it with a black cardstock so you will see that once i turn it i do have a thin border on each side i'm going to stick it on one of my black and white striped paper and i'm going to stick my elephant on top so now i have the balloons in yellow and green cardstock and i'm going to pack them with those balloons that don't cut out letters so those letters are easy readable at the front and i'm going to stick those on top of my panel and i'm going to use some black pen to draw the strings i'm also going to add some shine on the balloons by using my nuvo shimmer pen and my card is finished for my next card i'm going to create a father's day card i am going to use the large the capital letters of the die and i'm going to place it on top of a panel i'm securing it with some purple tape run it through my big shot and i'm going to repeat the same process two more times i want to make sure that everything is going to be nice and straight so i'm using my t-ruler there and in between the first and the second cut out i want to have enough space to stamp a sentiment now this is going to be a very clean and simple design perfect for dads and a really great masculine card i have used the same die to cut out the word dad using three different shades of blue all the way from darker to lighter and now i'm using this piece of paper which i am covering it completely with tape adhesive i'm going to use this to pack up my main panel and this is going to make sure that where those letters are it's going to be sticky so i can stick all those letters inside i found that that was the easiest way to do that and i haven't thrown the inside from the letters d a and d so i have everything on the side there and i will use those to add them inside so everything is going to end up completely flat and i love this inlay die cutting technique because you end up with beautiful results looking really professional i'm going to stamp the sentiment and this comes from the all about dad stamp set this is packed with sentiments for dads and i think it's uh one of those stamp sets we will be using again and again every year i went with urock but you can use any of all those different options and now let's move on to the last card for today this is going to be really crazy a crazy flamingo party card i am using those three flamingos this come from the legs let's flamingo stamp set i am stamping them a couple of times and i'm also going to stamp from the same stamp set the umbrella the martini glass and a little lemon i'm going to color everything with my alcohol markers cut them out by using the matching dies and you can see here a fine detail i am stamping inside those glasses some ice cubes now have colored everything and cut them out and i'm going to work on my white panel to create a background for my flamingo party for that i'm using one of the stencils that has just been released the one which is packed with different sizes of circles and i'm going to create different circles all over my place so that i can nest my flamingos on top again just because i want to have a quite subtle look at the background i'm using my blending brushes instead of my blending tools i am moving my stencil every time switching to different sizes of circles and to using different colors now i am also using some masking tape to make sure that i don't go outside of the circles and not blending all over the place just to keep everything nice and neat also make sure that you clean up your stencil before you move on otherwise you might easily transfer some of that ink in different areas that you want to keep clean and now i have my panel ready i am going to add my flamingos on top each of those flamingos is going to go on its own little circle and i'm going to add for every one of those a little martini glass i am keeping everything completely flat so i'm sticking everything down with my white glue or my tape adhesive i know that this design could look awesome if i used foam squares at the back but i didn't want to bother with tiny little pieces of foam squares at the back of all those glasses and the tiny lemons etc so i kept everything flat but i'm going to add dimension by adding foam tape at the back of the whole panel as i stick it on top of my card base which i chose to be black so that it brings and helps all those colors to pop even more for my sentiment i went with have a flamazing day which i white and post on a piece of black cardstock and i'm going to finish it off with my favorite nuvo drops these are clear nuvo drops and i'm adding them randomly all over the background so my last card for today is finished here are some close-up photos and now let's take a quick look on all the eight cards that i made for today using products from the latest release by my favorite things it's a really fun release i am really happy with the outcome i absolutely adore these cards and i had so much fun creating them i hope you had fun watching too So here are some close-up photos of all the cards that i made for today don't forget that i have also filmed a video where i'm showing you a close-up look on all the products released for the month of may you can check this out you will find the link at the end of this video and as always you will find a full list of supplies with links to different online shops down below in the description area as well as on my blog thank you all so much for watching don't forget to like this video to subscribe if you haven't done so already and to leave me a comment and let me know which one of those eight cards was your favorite